Red RC

April 5, 2023

Sworkz S14-4 Series 2.5mm Alu Chassis

Sworkz has released for their S14-4 1:10 Offroad Buggy series this stronger 2.5mm aluminium chassis. Produced from high quality 7075 aluminium with lightened CNC machining, the hard coated surface protects your chassis and creates less friction. It 100% fits on your S14-4 without any modifications. The chassis lowers the Center of gravity and reduces flex. Therefore the steering is more precise and you have less load changes and it is fits perfectly at High Grip conditions.

Source: Sworkz [Facebook]

April 5, 2023

MIBO Drift King Gyro

MIBO has introduced a new Drift King Gyro that is a new generation among gyros of its category. Racers may have come across gain curve settings (PCA, QUICK, Gain curve etc.) on a top-end gyros already but until now, it was in higher price range and harder to set up. This function, however, moves the RWD drift machines driving to a next level. Setting the gain level is not just about compromise between enough stabilisation and not losing steering response, thanks to it. It allows the smoothest possible ride, with sensitive control and quick angle changes. That’s why we wanted to bring the gain curve to a lower price category. The curve progression was tuned in cooperation with drivers of various categories, from beginners to experienced competition drivers, so it fits well for most users possible and built into the gyro software. That means it works optimally right after switching the gyro on and doesn’t bring any extra setting to worry about.

View Features and Spec here

April 5, 2023

Yokomo MD1.0 Red/Purple Version

Yokomo has released two limited editions of their Master Drift MD1.0 drift car, the Red Version and the Purple Version. A drift car chassis that has gained the support of expert drivers as a high-end competition machine, it is now available in a limited edition version covered with red/purple colour anodised parts. The contrast between the chic matte graphite parts and the brightly coloured anodised parts dramatically increases the sense of ownership of the chassis. The basic design is the same as the previous MD1.0, but this colour version has a 4-gear rear drive for even greater acceleration traction. This specification is ideal for P-tile and coloured concrete surfaces with low grip, increasing the sense of speed in single runs and building an advantage in pursuit runs as well.

View more images here

April 4, 2023

Reds Racing Rotary Backplate

Reds Racing has finally released its RTX Rotary Backplate which the Italian engine brand claim is an engineering masterpiece that will revolutionise the world of RC Model Nitro Engines. Developed by Marco and Mario Rossi in collaboration with some of the best RC drivers in the world, the backplate aims to increase engine power and improve stability at idle speed thanks to a drastic reduction in friction between the connecting rod and backplate. Reds Racing was one of the first companies in the world to work on reducing the friction between the backplate connecting rod with the introduction of DLC coating on the backplate. This time their engineers have invented something unique in the RC model market, destined to be considered one of the most innovative solutions of the last 30 years. Contrary to what happens for traditional RC engines, where the connecting rod slides on the backplate producing sliding friction, in the RTX Backplate the connecting rod is in contact with a special steel plate that can rotate together with the conrod thanks to the fact that it is mounted on two special high speeds ball bearings. The backplate is designed, made and tested in Italy respecting the best quality standards. It is currently only available as an optional part and suitable only for Reds Racing engines on road and off road.

View more images here

April 4, 2023

Hamon wins 1:8 GT Worlds Warm-up Race

Serpent team driver Jeff Hamon took the win at a rain effect 1:8 GT World Championship Warm-up Race over the weekend. The 1:10 and 1:8 Nitro Onroad World finalist, would top 4 of the 6 rounds of qualifying at the John Grant International Raceway in Sydney to secure the overall TQ ahead of another of Australia’s international nitro racers and World finalists Peter Jovanovic. The Capricorn driver topping Q2 with the Xray of Michael Stone the only other driver to top a round when he was fastest in the final qualifier. Posting three Top 3 runs Tim Moylan’s Mugen would qualify third and unfortunately the arrival of rain meant racing couldn’t progress passed the Semi Finals and so the result was declared on qualifying. As well being the official Warm-up Race for the second running of the IFMAR 1:8 GT World Championships which are scheduled for October 08-15, the race was also the NSW Onroad State Title decider. In 1:10 Brayden Stanley took his Infinity to the win in the 30 minute final ahead of David Chen and Tate Firth while in 1:8 Jovanovic took the title based off qualifying from Leigh Dytor and Tim Moylan.

Image: NSWRCRCC [Facebook]

April 4, 2023

AGFRC Non Polarity Capacitor Box

Servo manufacturer AGFRC has just released this low impedance capacitor module with 2000uF high capacity. AGFRC CNP2000C comes with high precision CNC machining aluminium case for excellent heat dissipation. Ultra-small size and light weight , ideal for mini scale car, touring car and drifter. With a maximum voltage of up to 16V this helps with voltage spikes or use with HV batteries. With its non-polar feature, it is more safe and convenient for operation. Each cord attaches to the battery positive/negative connection terminal on the ESC or receiver.

View Features & Spec here

April 4, 2023

T-Works 22X-4 Carbon Top & Steering Plates

T-works has added a number of new carbon plates for use on TLR 22X-4 1:10 4WD Buggy. Machined from carbon fibre they are offering two versions of top plate, one based of the original design and a V2 option that has more flex characteristics. Also offered for the 22X-4 is a carbon steering plate that helps reduce weight and add to the over look of the buggy.

View steering plate here

April 4, 2023

ReveD RDX black FRP chassis and side decks

Japanese RC Drift car manufacturer ReveD has released this Black FRP main chassis & side deck set and side deck set for it RDX 1:10 drift kit. The main chassis and side decks, which use cool black FRP, make the RDX run more competitive by increasing the machine’s pitching rigidity and providing moderate flexibility. In addition to the RDX standard hole positions on the main chassis, service holes that can be used with some MC-1 parts have also been drilled, making it highly scalable. By attaching the side deck set to the composite resin main chassis, it improves the rigidity in the pitching direction while taking advantage of the advantage of the genuine chassis that is easy to manoeuvre, and the feeling of kicking out when the throttle is turned on is more improved. The battery is only compatible with short Li-Po horizontal placement.

View kit mounted here