September 6, 2024
…freely. Having tested the gears for a couple of months with huge success, the only time they could strip them was on a very high bite carpet track, with a direct drive, and the gear diff in the highest 3 position. The way the AE transmission is designed is that in the higher positions you are increasing the gear mesh gap and the removal of the slipper put a lot of strain on them when landing at full throttle. They were also tested on the same track in Mod with a slipper and there were no issues. Source: Avid [avidrc.com]…
September 6, 2024
Xray has added two new Aluminium Side Belt Pulleys for its X8 1:8 Onroad chassis for adjustment of front tyre rotation speed in relation to rear tyre rotation. Available in 34T/35T options, the pulleys are CNC-machined from premium lightweight Swiss 7075 T6 aluminium and are strategically lightened. They are finished with a black hard coated for extra durability and long life. Source: Xray [teamxray.com]…
September 6, 2024
Germany’s Revolution Design Racing Products continues it release of option parts for the Team Associated RC10B7 1:10 2WD Buggy with this Aluminium Differential Case. Made from 7075-T6 aluminium the differential case improves oil cooling due to the material’s properties, ensuring more consistent handling throughout the entire runtime. Precision machined and hard anodised for maximum durability, it weighs in at only 9.6g. The case is Laser-etched with the RDRP logo for a premium look. Source: RDRP [revolution-rc.com]…
September 5, 2024
After the positive debut at this year’s EFRA 1:10 Nitro Touring Car European Championship in France with its official drivers, Italian engine tuner Ielasi Tuned has released its new EFRA2701FT muffler. Like its previously released 2185FT for 1:8 Onroad and 2186FT for 1:8 Offroad, their latest 1:10 muffler is in a single piece further optimising performance as well as removing the ‘annoying’ exhaust gasket. Featuring a Hard Coated treatment, the EFRA2701FT gives improved in performance and consumption. Source: Ielasi Tuned [ielasituned.com]…
September 5, 2024
RC Discharger has released a new a new flat iCharger Battery Temperature Sensor designed to seamlessly integrate with your iCharger. The flat sensor design ensures optimal contact for LiPo or LiHV batteries, making it ideal for precise temperature monitoring during both charging and discharging cycles. Built with high-quality materials for long-lasting performance, the sensor is equipped with a Male 3-pin JST-XH or Futaba connector with 36 inch length 22 AWG Silicone lead. Source: RC Discharger [rcdischarger.com]…
September 4, 2024
Adding to its range of touring car body accessories, Japan’s SMJ has introduced this Thin Type Rear Bumper Side Stiffener for use with the 190mm Twister body from Xtreme Aerodynamics. Adding no noticeable weight even when used on ultra-lightweight bodies, this stiffener is designed to prevent the rear bumper from getting caught inside due to unexpected incidents during races. Pre-cut to fit perfectly on Twister and Twister SPECIALE bodies. Equipped with double-sided tape for easy application directly onto the body. Source: SMJ [smj-rc.com]…
September 4, 2024
New from Revolution Design is this Hard Coated Idler Shaft for the Team Associated RC10B7 1:10 2WD Buggy. Compared to the standard idler gear shaft, this premium upgrade is hard-coated and hollowed out, making it not only lighter but also more durable. These features lead to improved performance and longevity of your vehicle, especially under demanding racing conditions. With this set of three idler shafts, you can change all idler gear shafts of your B7 gearbox. Source: RDRP [revolution-rc.com]…
September 4, 2024
RC Discharger has unveiled a new 2S version of its Regenerative Discharger V2. This compact and lightweight model is designed for enthusiasts who prefer to travel light. Being smaller and lighter than the 4S version, Weighing only 50oz with AC and 57oz with the iCharger S6, it offers unparalleled performance. Perfect for 1:12 and 1:10 categories, this revolutionary discharger is a game-changer for RC racing. RC Discharger’s Regenerative Discharger is the first-ever battery discharger compatible with all Junsi iCharger models, including the X6, X8, X12, S6, DX6, DX8, and DX12. Whether you’re a professional or a hobbyist, this compatibility ensures…
