Red RC

May 12, 2023

Team Associated RC10T6.4 Team Kit

Team Associated has introduced the latest version of its legendary 1:10 Stadium truck, the RC10T6.4 Team Kit. It shares key components with the RC10B6.4, RC10B6.4D, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time. Suspension and jumping goes through the large-volume 13mm big bore shocks with new truck springs. The new chassis design is a truck version of the RC10B6.4 buggy design and gets a new ballstud mount and top plate system with an angled steering for improved consistency. On top of that, racers can tune the steering height, axle trail, and caster inserts for tuning the front end feel. The rear end grip is improved with the optional C and D mounts and 92.5mm CVA bones included in the kit. Suspension linkage rides on the new 3.5mm diameter rod ends and turnbuckles.

View features list and photos here

May 11, 2023

Xray NT1 Ultra-Lightweight Drive Flange

Xray has released an optional ultra-lightweight 1st gear drive flange made from 7075 T6 aluminium for its NT1 1:10 Nitro Touring Car. For serious racers looking for smart weight savings and optimized rotating weight, it has been strategically lightened to reduce rotating weight without sacrificing strength or durability. It includes factory-pressed high-quality German 1-way bearing, hand-ground for maximum running precision. The 1-way bearing is non-replaceable once worn out, so it must be regularly serviced, cleaned, and oiled regularly with Xray recommend using its own One-way lube.

Source: Xray [teamxray.com]

May 11, 2023

Capricorn ONE .21 GT 2023 engine

Capricorn has presented its new ONE .21 GT 2023 engine. Starting from the base of their already very successful engine, they have updated the latest version with a new Piston and Sleeve. As usual with their entire engine line, the GT 2023 has a hand tuned piston/sleeve and crankshaft. The result is an increase of performance keeping the fuel consumption in line with the mandatory 7 minutes. This engine is a limited edition production specially build for the upcoming 1:8 GT European and World Championship, the latter taking place in Sydney, Australia from October 08-15.

View more images here

May 11, 2023

T-Works FW06 Alu Option parts

T-Works have released a number of aluminium option parts for Kyosho’s FW06 entry level 1:10 nitro touring car. The Center Drive Cup, Center Drive Shaft Set, Brake Shaft, Differential Cross Pins are all machined from 7075-T6 Aluminium and hard coat finished for durability and offer a weigh saving over the standard kit parts.

View other parts here

May 11, 2023

Power HD teams up with Joe Richardson

Power HD has announced the signing of Hong Kong based touring car driver Joe Richardson. Having signed with the Yokomo Factory team last month, the British born driver will be racing all of the major RC events in Hong Kong, focusing on the Modified class, and will also represent Power HD to attend some international RC events in and around Asia. Commenting in the announcement Richardson said, ‘I have been using the Power HD S15 Servos for the last 6 months and I was blown away by the quality, reliability and feeling from the servo. It’s amazing to be supported by the Power HD Factory team for my 2023 programme and beyond! I can’t wait to get started!

Source: Power HD [chd.hk]

May 10, 2023

Ruddog CA Activator Spray

New from Germany’s Ruddog is this CA Activator Spray, a cyanoacrylate accelerator designed for use with all conventional cyanoacrylate adhesives. The Ruddog CA Activator significantly reduces curing time, whether the adhesive is high viscosity, medium, or thin. It is perfect for gluing on-road and off-road tires. Simply spray the activator carefully onto the adhesive area from a distance of approximately 50cm. With 200ml of content, the spray fits easily into any tool bag and is enough for numerous sets of tires and adhesive areas.

Source: Ruddog [ruddog.eu]

May 10, 2023

Infinity IF14-2 & IF18-2 Option Parts

Infinity has released new option parts for its IF14-2 1:10 Electric Touring Car and IF18-2 1:8 Onroad chassis. For the Team Edition of the IF14-2, the Japanese company has a new low friction rear belt. Intended for ‘Stock’ class racing, it is made of a softer material than the kit’s standard black belt allows for better throttle response. For IF18-2, they have two new rear upright options. Bearing support rigidity has been greatly improved by increasing the roundness of the bearing cavity area as much as possible using a special molding process that has never been used before. This provides a higher consistency of rear traction. The Hard version is made with carbon mixed material to greatly increase the rigidity of the parts. The rear upper arm and wheel shaft support are more rigid, and rear traction is improved at all speeds.

View more images here

May 10, 2023

MonacoRC ‘RC Volt Check’

MonacoRC has released the ‘RC Volt Check’, a very useful tool for checking battery voltage both before and after running your RC car. How many times have you wondered, just a few seconds before heading to a race, if the batteries on your model car are fully charged? Small but with a strong sense of style, the three-digit display is enclosed in a 3D-printed red case. Made with high-quality silicone cables that are 10cm long, with 4mm connectors at the end that allow you to check the voltage of batteries with both 4mm and 5mm plugs. Monaco RC are confident that once you try this tool, you won’t be able to live without it.

Source: Monaco RC [monacorc.com]