Xray has added a new front weight option for its X4F’25 1:10 FWD Touring Car. The front left and front right 50g brass weights are moved from the bumper under the front driveshafts into the centre of the front drive train for improved weight transfer on & off power. These weights makes the car better balanced and improves its rotation. CNC-machined from brass material, black colour coated and laser engraved.
RC racers can never have enough storage solutions with T-Works introducing its new Black Hollow Board Carry Box. Measuring 246x146x482mm and made from sturdy and durable high-quality corrugated plastic. Offering resistance to impact and wear-resistant as well as giving a certain degree of thermal insulation, the boxes effectively protect you model car / other accessories from damage while in transport or storage. Available singlely or as a pack of 10, the flat packed carry boxes can be quickly assembled without the need for any tools.
New from Infinity for its World Championship winning IF18-3 1:8 Onroad kit is this Aluminium Upper Knuckle Set, with the Japanese manufacturer also introducing a new Hard Plastic Front Body Mount Set. With the new Upper Knuckle Set not only has rigidity been increased by using A7075, but the pivot height has been raised by 2mm compared to the standard part R300B/300H, providing more responsive steering and changing the camber change rate. To ensure clearance inside the wheel, the ball has been downsized from 8.5 to 8.0mm and the screw cap from 10 to 9mm and tilted by 10 degrees. A specially prepared 8mm titanium ball is included to ensure proper steering angle. The main body is hard anodised. The Hard Plastic Front Body Mount Set revives the plastic front body mounting plate that was a standard item on the first Infinity 1:8 chassis and the IF18. It subtly reduces the powerful front downforce from the body for smoother steering characteristics.
The 1:8 Stockcar World Championship took place at the Adur Model Car Club oval track in the South of England over weekend with English Champion Ricky Slater crowned the new World Champion. Starting out against almost 60 drivers drawn into 10 qualifying heats, three rounds of qualifying, Quarter & Semi finals whittled that down to just 6-drivers for the Main Final. The 5-minute World title decider would see Slater take his Nova Engine powered LMH Chassis to the win ahead of 2023 Champion Maikel Rutten from the Netherlands. They were joined on the podium by Ben Harding. Jack Nessling was crowned the Junior World Champion.
Schumacher has added a new tyre to its popular range of 1:10 offroad tyres with the introduction of the new Shard front for 4WD vehicles. Based on the very successful Fusion the new 4WD Shard has been developed to give the ultimate steering with good balance on high bite surfaces. With Schumacher’s classic stagger pattern now utilising a modernised geometry the Shard will enable the 4WD to have steering exactly where you need it.
Source: Schumacher [racing-cars.com]
Following his successful collaboration with RC Xpress who produced a Hara edition of their Execute XQ11 1:10 Competition Touring Car kit that features Atsushi Hara’s trade mark magenta colour, the Japanese legend has now teamed up with long time sponsor Yeah Racing to give your Tamiya TT02 the Hara look. The Alu Conversion Kit for Tamiya’s popular plastic chassis entry level touring car consists of everything you need to upgrade your TT02. It also brings an extensive adjust-ability for your TT02 to race under different conditions and tailor fit your driving style. For instance, dampers is fully adjustable and comes with 6 set of spring with different stiffness. Both front and rear upper arms are adjustable for camber angels. These adjust-ability has make this conversion kit very flexible to serve with any kind of settings and motors.
View kit parts list & more images here
Electric Touring Car manufacturer Xpress has added to its range of tools with the released of this Multifunction turnbuckle tool. Offering easy building and adjustment of turnbuckles, it features in the center a cutout for sliding in 4mm ball ends to hold them in place during building. A 4mm wrench at the other end for adjusting and a 1.5mm pin to adjust turnbuckles with a adjustment hole.
Continuing its roll out of option parts for the Team Associated RC10B7 2WD Buggy, California based R1 Wurks has released this Aluminium Front Ball Stud Mount and simple drop-in 10gram Brass Weight. Weighing just 10.9 grams, this upgraded bulkhead is lighter than the stock plastic mount and offers two additional in-between ball stud mounting locations, providing more tuning options than the original. In certain conditions, adding weight to the front of your buggy can be beneficial. In most cases, doing so may help with front-end traction, steering response, and stability, especially in corners. Additionally, added weight can help reduce front-end bounce, leading to smoother handling and control. Of course, you should consider the overall weight distribution of your platform and may want to adjust the battery placement in conjunction with the added nose weight.
