May 29, 2014

JR Mitch doubles at Hangin’ Judge Open Wheel Classic

JR Mitch doubles at Hangin' Judge Open Wheel Classic

GSpeed Raceway hosted the 2nd annual Hangin’ Judge Open Wheel Classic on a tight and twitchy indoor clay track. TLR’s JR Mitch was able to TQ the 2WD Mod and 4WD Mod class for the triple A-mains. In 2WD JR was able to win the 1st and 2nd A-main to take the overall win early. The opening 4WD main had JR falling to the back of the field after a lap one mistake but he was able to come back in A2 and A3 to take the 2nd class win of the day.

Click here to view the 4WD podium


May 29, 2014

Kyle Rhodes takes CT State Championship

Kyle Rhodes takes CT State Championship

The CT State Championships was held at Wolcott Hobby and Raceway in Wolcott, Connecticut with around 100 entries. Up for grabs was the State championships for 1/8th nitro buggy, truggy, electric 8th scale buggy and 4WD SC. Leading up to the event the area experienced a few days of rain which left the track a little soft, but the Wolcott Hobby crew did a great job of prepping the track and making sure there was no standing water. Come heat 2 of nitro buggy qualifying and light rain started to fall again that quickly disappeared leaving perfect grip conditions for heat 3. Kyosho’s Kyle Rhods jumped out front early, limited his mistakes and was able to set TQ for the round. Round 2 and with an unchanged buggy but new tyres Kyle made a few mistakes early in his heat on which left him in third for a few laps but he again jumped back out front and was setting a new TQ by 6 seconds ahead of his round 1 time, but he had to pull off at the 3 minute mark, but the TQ from round 1 was fast enough to give him the overall TQ.

Click here to continue reading


May 29, 2014

DE Racing 22T & RT6 Speedline ST wheels

DE Racing 22T & RT6 Speedline ST wheels

DE Racing extend their existing line of Speedline ST disc wheels for the TLR 22T and the Kyosho RT6 by adding four new colours. Coming in red, pink, orange and green, the rims are direct replacements for the stock wheels and they add to the yellow, white and black wheels that are already available. All are made from tough yet lightweight material and offer specific offsets for each vehicle.

Click here to view the other new colour options


May 28, 2014

STRC Team Associated B5 series option parts

STRC Team Associated B5 series option parts

STRC introduce the first in a line of option parts for the Team Associated B5 and B5M. First up is a 25 degree front aluminium bulkhead. The bulkhead increases the durability of the front end of the buggy while adding a bit of weight to the front of the buggy to help assist in tuning for more steering out of your buggy. The set-screw over hinge-pin design provides long life for the aluminium parts as the hinge-pin will not wear down the bulkhead over time.

Click here to continue reading


May 28, 2014

2014 ROAR Region 4 Championships – Report

2014 ROAR Region 4 Championships – Report

Region 4 racers converged at Space Coast R/C Raceway in Cocoa, FL, for a weekend-long event to determine the coveted ROAR regional title. Racers came in from all points of Florida to compete and also gain access to a facility that is also going to host the ROAR 1/10th Off-Road Electric Nationals later in the year. A very warm Florida weekend made things rather stuffy inside and out, but as always the track is full of traction which racers seem to love time and time again. A bumpy surface combined with the high-traction had racers on-edge all weekend trying to find that ultimate combination of fast and stable.

Click here to continue reading the report


May 28, 2014

Schumacher brand glass setup boards

Schumacher brand glass setup boards

Made from 6mm toughened glass are three new setup boards from Schumacher. Available in Schumacher, Core RC and Contact designs, the boards measure 40x30cm and are ideal for setting up 1/10th touring, GT10, LMP12, GT12 or 1/10th off-road buggies. Also available separately are three matching neoprene zip-up bags to protect the board during transportation.

Click here to view more photos


May 28, 2014

On the Grapevine – Austria

Grapevine Austria

Over the last month my work commute became a bit regular, well regular in terms of the destination country as I made three consecutive trips to Austria. The first of these was for the season finale of the Euro Offroad Series which thanks to a change to the weekend schedule would turn out to be the first time in the championships’ 11 races that on a Sunday evening as I did my final wrap up that I made the comment ‘I enjoyed that’. From there it was ETS action that brought me back to Austria, this time to a small town called Mattsee. In my time as Events Editor of Red RC I have got to meet many great people around the world but on that weekend I would get to meet someone who a few years ago as a huge motoring fan I would never have expected to meet let alone be invited to have dinner with. While appreciative of its picturesque countryside and enjoying every second of driving on its twisty mountain roads my Austrian ‘tour’ would unfortunately end on a very damp note as the rain did everything in its power to try and prevent the running of the second round of the new Euro Nitro Series.

Continue reading On the Grapevine here


May 28, 2014

RSD TC6.2 RSD7 carbon fibre chassis

RSD TC6.2 RSD7 carbon fibre chassis

Available now from Reflex Racing is the RSD7 carbon fibre chassis for the Team Associated TC6.2 touring car. The shape of the chassis has been engineered so that the car can roll and pitch more naturally, increasing the traction and the steering of the TC6.2, which translates into more corner speed and stability. This is further assisted by the reduced width of only 85mm that has been chosen to promote more roll in the corners as well as allow to run a lower ride height when necessary. On top of that the battery position is pushed further back to increase corner entry steering. Other features include mounting holes for an optional and soon available motor mount and drilled holes underneath the front bellcranks allow easy access to the inverted bellcrank screws. Optional keyed-in carbon fibre battery holders are available separately.

Click here to view more photos