1:12 Specialist manufacturer Roche has introduced an updated main chassis for their P12V pancar. The new 7075 aluminium main chassis has a reduced material front section meaning less front weight and a reduce area that can touch the track surface. This changes gives improvement with the car’s steering response especially on high grip conditions. Source: Roche [rocherc.com]…
…from behind. – “No-Shock-Towers design” no more breaking of shock towers and further lower the center of gravity. And the shock damper angles can be adjusted by shims precisely. – Servo mount is compatible with slim or normal size servo (8.0mm to 11.5mm thick) – Sway bar system (with bearing support) will be available in options – Front caster angle adjustable (with optional front bulkhead carbon plates) – Compatible with Kyosho auto scales body (98mm wheelbase) – Front width is 74mm with Narrow Wheels (N-8.5mm offset) – Rear width is 74mm with Wide Wheels (W-11mm offset) Source: RC Atomic [rcatomic.com]…
…station. The 150HS Soldering Station feature 150W of power and is fully adjustable temperature from 100 to 500 Degrees C. With super fast heat up it has a fantastic tip cleaning solutions and an internal solder roll holder means you never lose your solder. Allows solder to be dispensed through the front of the unit so always ready to use. Available with 3 different plugs for UK and Europe (220-240V) and USA (110-120V). Supplied with a large bevel tip optional fine point and chisel tips are available as is an optional ‘Helping Hands’ to assist when soldering. Source: Schumacher [racing-cars.com]…
…offers you effortless, consistent gluing as you can focus on applying glue, not turning the wheel. You can also say goodbye to CA glue contact, eliminate the risk of getting glue on your hands. Long gluing sessions become a breeze meaning mo more wrist fatigue. The upgrade is simple with it installed easily on your existing 1:8 Buggy Lazer Jig is approx 3-minutes. Once fitted it will work with any power bank, charger, or USB outlet and most RC chargers. The 6500mah Power bank provides 7+ hours of continuous use or 240 sets of tyres. https://www.youtube.com/watch?v=ZQ3QkxIHwbA Source: Raceform RC [raceformrc.com]…
Following the recent release of their Diamond Evo, VP-Pro has added another new pattern to its 1:8 Buggy tyre range with the launch of the Daggers Evo. The new tyre is designed specially for Loamy/Hard Packed/Blue Groove conditions offer stability at high-speed and high-grip. Made from high quality rubber and supplied with a durable closed cell insert the wheel os offered pre mounted on a choice of yellow, white, pink, green or orange wheels. As with other tyres in the range, the Daggers Evo is available in M1,M2,M3 and M4 compounds. Source: VP Pro [vp-racing.com]…
…T-Works is this Multi-function Bag complete with 10 Hardware Storage Boxes. The bag features double protection with Oxford cloth and waterproof lamination ensuring that tools and parts are properly protected in all environments. Built-in zipper pocket with removable compartment design you can adjust freely the layout according to your needs. Measuring 17.7×10.2×2.6cm, the transparent 15 compartment Hardware Storage Boxes allow you to quickly identify and access your parts providing you with a neat and organised parts management solution. On removal of storage boxes you have the option to adjust bag compartment space for tool and accessory storage. Source: T-Works [rc-tworks.com]…
Sweep Racing has released a new 1:10 spoke wheel that is officially licensed by famous Japanese car wheel manufacturer WORK. The new WORK Emotion wheels have zero offset as current dish wheels and are made of strong material for FWD or 1:10 Touring Car racing use. The wheels are available in white and black colour options. Source: Sweep Racing [sweepracing.com]…
Ielasi Tuned concludes it 2024 engine releases with the new GP9R24 .21 Onroad engine. Compared to their previous flagship GP9R23WC engine the the new GP9R24 engine get an exclusive Ielasi Tuned piston which allows the Italian engine tuners to have a tighter piston/cylinder coupling than the WC allows it to maintain better compression even when hot. The GP9R24 will be released with the new “R” reinforced connecting rod, crank with different timing and balancing to attenuate internal vibrations, new engine backplate and inner head with revised configuration and cooling head with the new 2024 graphics. Source: Ielasi Tuned [ielasituned.com]…
