Red RC

July 11, 2012

F.V.S.S. bearing grease

F.V.S.S. bearing grease provides great protection to your bearing by maintaining lubrication and adding an extra barrier that helps block dust/dirt to reach the deep groove. This grease is a light white and capable of performing at temps between -50°C to 150°C and ensures incredible smoothness, extending the life of your bearing. The grease is supplied in a syringe which makes it super easy to apply. The syringe holds 1 oz (19 g) of grease and ships as pictured minus the ziplock bag which includes a rubber sealing tip.

Source: F.V.S.S. [fvssshop.it]

July 11, 2012

JConcepts Summer Tour race 2 report

The JConcepts Summer Tour had its second stop this past weekend. The race was hosted by eXtreme Hobby Zone in Winter Haven, FL. The small outdoor track made for some tight racing and the Black Grooved center meant you had to stay in the line or risk ending up sideways. There was plenty of shade for the pits but an extremely bright sunny day kept the 83 entries nice and toasty. Two rounds of qualifying kicked off just before 10am and with a smoothly run program the final main finished just before 5pm.

Read the full report here.

July 11, 2012

Giesa & Depta wins Rd4 in North Germany

Hildesheim was location of penultimate round of the North German championships last weekend and Andreas Giesa produced this report. “Unfortunately the weather forecast was not good for this weekend and rain was expected. We started practice under dry conditions on Saturday morning and with my setup, which worked well last race in Braunschweig. There were only a few changes needed to adapt the 747 on this track. I used both shock and ARB extensions this time and got more steering on throttle and in fast corners and again the Xceed Spark body.

Continue reading the report here

July 10, 2012

Double victory & title for Coelho in Portugal Rd4

Last weekend saw the 4th round of the Portuguese gas on road nationals at the Vila Real circuit where this year’s 1/8th scale European Championships will be held at the start of next month. The race saw Mugen Novarossi driver Bruno Coelho TQ and win both the 1/8th and 1/10th scale 200mm classes as well as retain both his national titles. The track was very abrasive and the tires could only last ten minutes, so Bruno had to drive very carefully and conserve tires in a race of tactics rather than out and out performance. The 1/8th scale main saw Coelho take the win by 2 laps ahead of Jose Pequito in 2nd and Jose Carlos in 3rd. In the 1/10th scale class the margin of victory for Bruno was 4 laps ahead of Mário Miranda in 2nd and Hugo Mendes in 3rd.

View the 1/10th podium here

July 10, 2012

Kevin Pignotti wins Race2theWorlds contest

Kevin Pignotti from Italy has won the first Race2theWorlds contest. With over 1000 racers and gamers involved in this contest, the R2tW has become the single biggest R/C event ever. Kevin Pignotti is now preparing himself for to collect his big prize, the ultimate once-in-a-lifetime opportunity: to join the IFMAR 2012 World Championship Electrics 1:10 in the Netherlands on the 25th of July. The 16 year old said ‘it’s like a dream coming true’ and he hopes to do well at the 2012 IFMAR Worlds. For sure, it is going to be very interesting to see how well this young talent (without any prior experience in electric racing) is going to perform on World class level amidst the best of the best in R/C racing.

Continue reading the announcement here

July 10, 2012

HPI Ford Fiesta WR8 Flux RTR

To partner the super-cool WR8 3.0 World Rally Championship replica, HPI Racing have also got a Flux-powered electric version that is tuned for tarmac rally fun and excitement. The WR8 Flux has all of the tough drivetrain components of the nitro version, however it’s powered by a 4000Kv Flux Vektor motor and your choice of 2S or 3S LiPo battery. It’s ready to fly over jumps and blast down the street right out of the box.

View more details here

July 10, 2012

Kyosho Inferno & Plazma tuning options

Kyosho have released this gun metallic anodized radio tray connector plate made of high quality aluminium for the Inferno MP9 TKI3. This option part is not only adding some bling to the car, it is also a useful setup tool allowing you to adjust the flex of the car in this area to your likening. Also from the Japanese company for their Plazma Ra 1/12 scale pan car are these center shock springs. Available in the hardness of soft, medium and hard they are a must have to setup the car at the race track.

View the springs here

July 10, 2012

Xray NT1 pre-assembled brake pad set

For the NT1, Xray have released this factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. The brake pad backing plates are heat-treated for maximum lifespan. Special high-grip brake pad material is specially bonded to backing plates for high resistance to generated heat build-up. Sold as a set of 2.

Source: Xray [teamxray.com]