Red RC

May 18, 2012

Avid vented motor plate for B4.1 & TLR22

Avid RC have released this new vented motor plate for both the B4.1 and TLR22. Take advantage of the unique design of the Avid vented motor plates to improve your buggy or truck. The design team wanted to remove as much weight as possible up high, so they created the 45 degree angled vents which cut completely through the part which removed weight and added much-needed airflow around the motor-plate, yet still maintaining a rigid motor plate to keep gear mesh consistent. 100% milled which avoids all the extra stress that comes from stamping parts in order to keep the motor plates flat and your gear mesh perfect. Each plate is made from black anodized 3mm 6061-T6 aluminium with silver chamfered edge.

Source: Avid RC [avidrc.com]

May 18, 2012

JConcepts Finnisher for MBX-6R

JConcepts have announced the release of their Finnisher body for the Mugen MBX-6R. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have a strong and chiseled look, including a recessed area in the rear which allows another option for air-escape. The chassis side-guard to body fit has been tightened up which helps eliminate large empty voids that contribute to mid-flight directional changes. The area behind the cab has been greatly lowered exposing more of the engine heat-sink allowing more heat-escape.

View more images of the body here

May 18, 2012

Atomic RC VM-II 1/10th 4wd Mini-TC

Following the success of the original VM-II 1/10th 4wd Mini-TC, Atomic RC has released a highly anticipated updated version of the high performance 4WD Mini Touring Car. The most notable features of the new chassis are redesigned upper deck with flex adjustment and .5mm thickness reduction and the new main chassis is now 11mm narrower for faster response. Most of the M-Chassis bodies will now fit the chassis due to redesigned shock towers and the new car features carbon reinforced plastic material for all the major suspension components. Due to the popularity of Gear Diff, one Spec-R gear differential is now included in the kit.

View more details and images here

May 18, 2012

Robitronic LiFe hard case RX packs

Robitronic have introduced these two new receiver packs featuring a hard case. Often the 7.4 volts that come from a LiPo pack is too much for receivers or servos, so if you don’t want to use a regulator you can use Robitronic’s LiFe Packs which output 6.6 volts directly. The hump pack weighs 95 grams and has a capacity of 2000mAh while the stick pack is 1600mAh and weighs 80 grams.

View the stick pack here

May 18, 2012

Team C TS2TE 2wd SC truck

Team C have created this Team Edition of their TS2TE 2wd short course truck. The team version comes with new 16mm big bore shocks as well as a newly design SC body shell. To increase durability over the standard version it will come with a range of aluminium parts as standard including hinge blocks, motor mount for better cooling and a new 28T gear.

View some chassis images here

May 18, 2012

Bruno Coelho dominates Rd2 in Portugal

Last weekend the 2nd round of the Portuguese Nationals for 1/8th and 1/10th scale were held at the Maia track close to Oporto. Mugen/Novarossi driver Bruno Coelho continued on his preparation for this year’s 1/8th Euros in his country by dominating qualifying in this and the 1/10th scale class each by a margin of two laps. In the finals it was again Bruno who easily took the win in 1/8th scale by 10 laps ahead of the Xray pairing of Paulo Mota and Claudio Souto. In the 1/10th scale class Bruno won by a 4 lap margin in front of Pedro Sousa in 2nd and Mario Miranda in 3rd.

View the 1/10th podium here

May 18, 2012

Xray RX8 brass engine mount

Xray have produced this optional brass engine mount for the RX8 that provides solid engine mounting and easy adjustment. This 90g weight is heavier by 60g than the standard aluminium monoblock. With this extra weight the car has more in-corner steering as well as increased overall traction. CNC-machined from premium brass material it is made with the highest tolerances using premium fully-automatic German CNC machines. Ultra-strong construction provides extra long life and durability in even the most extreme racing conditions.

Source: Xray [teamxray.com]

May 18, 2012

HPI Ivan Stewart Desert-Trophy truck

HPI have released the Desert-Trophy with an officially authorized, vintage style Ivan ‘Ironman’ Stewart Toyota pick-up truck body. Of all the drivers that have tried to tame the desert, Ivan ‘Ironman’ Stewart is one of the most legendary drivers in American motorsport. From his first win in 1973, the Ironman went on to a hugely successful partnership with Toyota trucks and conquered the off-road racing scene, garnering 17 Baja 500 wins, 8 Mint 400 wins, 4 Parker 400s, 3 Baja 1000s and 4 SCORE World Championships. Ivan is an inductee into the Off Road Motorsports Hall of Fame, alongside such legendary figures as Mickey Thompson, Walker Evans, Parnelli Jones and Dick Cepek. The Desert-Trophy truck is topped with a scale replica of a vintage Toyota racing truck and finished in the iconic color slashes that identified Ivan Stewart’s racing team to all his fans.

View more images here