Red RC

February 18, 2012

Pro-Line Flo-Tek Ford F-150 Raptor SVT

Pro-Line have introduced the Flo-Tek Ford F-150 Raptor SVT clear body for short course trucks. Are you a die-hard Ford fan who needs the benefit of Flo-Tek technology to make that huge triple without blowing over. Now you can have the newest in race body styling technology and show off your love for Ford with Pro-Line’s new Flo-Tek Ford F-150 Raptor SVT body for short course trucks. This body features ultra-low, sleek body lines and distinctive Ford details blended with Flo-Tek technology that will make your SC truck look good going around the track.

View another image of the body here

February 18, 2012

Rumble in the Rockies report

This past weekend was the Rumble in the Rockies hosted by MHOR R/C Raceway in Denver, Colorado. There were nearly 200 entries with drivers from many parts of the country which would make for some good racing. The layout for the event was very high speed and combined with a small track size, the lap times dropped into the 11-12 second range. Dustin Evans would take TQ honors in the Modified 2wd buggy class by taking rounds 2, 3 and 4. Kody Numedahl and Michael Schoettler would qualify 2nd and 3rd respectively. Kody took A-1 and Michael took A-2 which meant that A-3 would determine the winner. Kody bobbled on the first lap but made his way back up to second only behind Dustin. A three way tie would go in Kody’s favor by .2 seconds giving him the overall win.

Continue reading the report here

February 18, 2012

Protoform PFR18 1/8th scale body

2011 was a great year for Protoform in the 1/8th IC Nitro On-Road class. Now only did 8 A-Main finalists at the IFMAR WORLDS in Homestead Florida chose the P909 body, but the other 2 A-Main drivers chose the Protoform R15, which ran the quickest lap times of the entire event. In the end, Robert Pietsch brought home the very deserving win and trophy. They decided to incorporate what they felt were the best characteristics of these two world class bodies to create the Protoform PFR18. Loosely modeled after the car that conquered the 24HR of LeMans, this body style has a few tricks of it’s own as well. There are a couple more molded in body stiffening contours to make the body more consistent and the body conforms to the 2012 ERFA/IFMAR body rules in every way. Available in 3 thicknesses, .040 Lexan (regular weight), .030 Lexan (light weight) and .025 Lexan (lightest weight) “Pro-Lite” for the expert racers. This body has a protective outer film, body side-stiffeners (w/hardware) and comes with a large Protoform decal.

View more images of the PFR18 body here

February 18, 2012

Arrowmax MRX5 clutch set

Arrowmax have released this clutch set for the Mugen MRX5 1/8th scale on road chassis. Its design features the tapered clutch plate instead of the tapered flywheel which ensures better punch and lots of top speed. Sold as a complete set including bell housing.

Source: Arrowmax [arrowmax-rc.com]

February 18, 2012

Pro-Line 2012 Bulldog for B44.1

This is a BullDog Clear Body for the Team Associated B44.1 Buggy. For 2012, Ryan Cavalieri has improved upon the design and developed the most advanced body yet, the 2012 BullDog body. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body and the fins also add rigidity to the body to increase aerodynamic efficiency.

View more images of the body here

February 18, 2012

Pro-Line 2012 Bulldog for DEX410 & DEX210

Pro-Line Factory Team driver and TD pilot from Austria Hupo Honigl asked Pro-Line to develop the most advanced body yet for his DEX410 and DEX210 race cars. Pro-Line delivered with the 2012 BullDog body specifically designed around the unique Team Durango buggies. The design incorporates the new BullDog styling for 2012 that creates even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency.

View more images of the shells here

February 18, 2012

Axial AX10 Ridgecrest

April 2012 marks the five year anniversary of the AX10 and Axial felt that it was time for the product that launched them into the crawling segment to undergo some evolution and receive some trickle-down technological advancements of its own. They have not changed the original scope of the vehicle, the AX10 Ridgecrest is still the “Leatherman” of the Axial product line and it’s where backyard crawling begins. They have taken key items from their products and put them into the AX10 Ridgecrest, along with an all-new tube style chassis. The most noticeable performance upgrade of the AX10 are the Ripsaw tires, with their 5.5″ tall by 2.1″ wide stance, mounted on officially licensed Raceline Renegade wheels. But what you do not see is the updated suspension geometry that also delivers better articulation. All delivered through Dana 60 inspired AR60 OCP-Axles that have already been proven on the Axial Wraith.

View the features list and more images here

February 17, 2012

Mike McMahon joins Associated Electrics

Some industry news with Associated Electrics Inc. announcing the addition of Mike McMahon to their Design/Marketing team. His impressive resumé is packed with over 10 years of RC Graphic Design experience, including 6 years as the Art Director for Xtreme RC Cars magazine, along with working as a freelance designer for a number of industry clients. In addition to his Graphic Design skills, Mike was also an accomplished National-level racer with over 20 years of general RC knowledge. He is sure to make an immediate impact in the continued growth of our Associated, Reedy and LRP brands.

Source: Associated [teamassociated.com]