Red RC

December 14, 2011

Carsten Keller joins Kyosho Germany

Kyosho Germany is proud to announce the signing of German Truggy National champion Carsten Keller. Running for Losi/Horizon the previous years, Carsten was looking for a new challenge and is joining the reigning world champion team with national team mates like Timo Engelstätter and two time German national champion Tim Bremicker. Carsten will compete in all major races like the Neo12, the Euros and World Championship as well as the German national championship. His rides will be powered by Team Orion engines and ground contact will be provided by AKA tires. Carsten had the following to say about his new deal:

First I would like to thank Losi, Horizon Hobby UK, Horizon Hobby Germany and especially David Spashett and Sascha Bauman for supporting me the past years. Without them I wouldn’t be where I am today. But time goes by and I am ready for a new experience. I am happy that Kyosho Germany put their trust in me and I will do my best to represent the brands and achieve as good as possible results in the upcoming races.

Source: Kyosho [kyosho.de]

December 14, 2011

The Dirt to sculpt Dialedinc.com Champs track

The 2012 Dialedinc.com Offroad Championships take place from the 23rd to the 25th of March at T&T Speedway in Louisiana and they have only 60 spots left to fill the race. The organizers are very excited to announce that World Class track builder Joey “The Dirt” Christensen will be building the track for this great race. Joey is well known all over the world for his great tracks, such as The Dirt Nitro Challenge and The Dirt Nitro challenge in Italy. Get signed up now, don’t get left out.

December 14, 2011

Hudy conical clutch washer springs

New from Hudy, these conical clutch washer springs offer more consistent clutch operation for maximum punch. When using the standard spring, after the clutch is set for the first time the spring becomes deformed over time and needs re-tightening. This new conical clutch washer spring set allows the clutch to retain its setting for a very long time without needing readjustment. Suitable for 1/8th and 1/10th clutches they are sold in a set of 0.4mm washers (8pcs) and 0.6mm washers (8pcs).

View the washer springs here

December 14, 2011

F.V.S.S. titanium screws

F.V.S.S. have introduced a new range of titanium screws to their existing product line. These premium titanium screws are made in Europe and machined from grade 2 titanium and compared to the standard screws, these versions are more approximately 45% lighter. Available in 3×6, 3×8, 3×10, 3×12 & 3x16mm countersunk versions and 3×4, 3×6, 3×8, 3×10, 3×12 & 3x16mm button head versions. They are also available as complete sets for the most popular 1/8, 1/10 & 1/12 on road car.

Source: F.V.S.S. [fvssrc.com]

December 14, 2011

JQ aluminium rear hubs & soft bladders

JQ Products have released these new CNC machined aluminium rear hubs which come in gold or black and are stronger and more tunable than the stock plastic ones. The upper link holes are one row higher than on the plastic hub, so the 2nd highest row is the same as the plastic hub top row. The new top row makes THECar smoother in corners, and it seems to keep a more consistent arc around corners. Also, the hub requires 4 plastic spacers to fit in the arm, with 2 in front, and 2 behind being the stock position. This means it can be moved 2mm further forwards for even more rear traction, or backwards for high traction tracks, compared with the plastic hub. JQ have also released new soft bladders for the shocks which give THECar more traction and makes the suspension feel smoother. The shocks are also easier to build with this bladder.

View the bladders here

December 13, 2011

Venom Gambler red alloy hop-up parts

Available from Venom for the 1/10 Gambler RTR Short Course Truck is this range of red hop-up parts. Whether you’re a racer or a basher, these parts will provide additional tuning options for increased performance and durability. Now available in anodized red and machined from high-grade alloys, these parts give you the same look and performance edge usually reserved for factory-sponsored drivers. The new parts include 7075 T6 pivot balls, Alloy front pin supports and alloy 3.5 degree toe-in block front, 3.5 degree toe-in block rear and 1.5 degree toe-in rear sub set.

View the other parts here

December 13, 2011

Ryan Cavalieri dominates Northern Nationals

The Proving Grounds raceway in Jenison, MI is a fairly new facility in the northern part of the United States, and with a strong group of locals and motivated organizers, the track is looking to put itself on the map. This past weekend the facility played host to the Third Annual Northern Nationals, and together with the event organizer, Team Associated arranged for World Champion Ryan Cavalieri to attend.

Continue reading the report here

December 13, 2011

Contact pre-glued 1/12th scale tires

Contact tyres have introduced a new range of pre-glued 1/12th scale tires suitable for 1/12th circuit cars. After a huge amount of testing of natural foams and with the help of team drivers Paul Lemieux and Chris Kerswell they have entered into the market with Contact 1/12 scale tires. To help the driver they have decided to keep the same colour range of the main brands in this market. Trued to optimum diameter of 44mm for the fronts and 46mm for the rears they come pre glued on special Contact rims in white, which has been extensively tested for perfect strength and flexibility to provide the maximum traction.

Source: Contact [racing-cars.com]