November 9, 2011

Centro C4.1 Option parts

Centro C4.1 Option parts

CML have released a whole bunch of optional parts for the Centro C4.1 conversion. First up is a full range of weights for the front of the car including a 30 gram brass front bulkhead and brass bulkhead weights in 15 grams, 10 grams and 5 grams. These can be mounted together with the Delrin front brace which is need to mount the brass bulkhead. These weights also work on the B4.1. Other new parts include a carbon battery x-brace and carbon LiPo battery holders. Finally there are some narrow front wheels which provide a slightly different profile to the standard Team Associated front wheels to provide extra bite on certain surfaces. They are also better suited to the narrower Schumcaher Stagger Rib tyre than the stock wheel.

View the other parts here


November 9, 2011

Bittydesign Force body for Xray XB808

Bittydesign Force body for Xray XB808

Bittydesign have introduced their new Force body and mud guards for the Xray XB808 2011. The new shell follows the same lines as the previously available Force bodies with the extreme cab forward treatment for improved handling and to improve cooling to the engine. This shell also features 2 additional big air scoops on the side for improved downforce with additional room under the cab for the air filter. Made in Italy using high quality lexan, the shell is sold with decal sheets, window mask and protective film, all at a very good price. The mud guards, which are mounted on the front face of the rear wishbones are also made from genuine lexan polycarbonate. Both products are available now through the Bittydesign website or in 2 weeks through their distributor network.

View more images here


November 9, 2011

Alexander Hagberg confirmed for ATS Pilot race

Alexander Hagberg confirmed for ATS Pilot race

The organisers of next week’s Asian Touring Series Pilot race at the Yatabe Arena in Japan, are delighted to announce that Swedish driver Alexander Hagberg will attend. If current form is anything to go by the factory Xray/LRP driver, who will compete at the event alongside the Xray T3’s designer Martin Hudy, is expected to be battling for the race win. The event which will be run from the 18th to the 20th of November will be open to Modified and Pro Stock, running hand out 17.5T Speedpassion motors, as well as a large number of support classes including an offroad race at the Arena’s indoor dirt track. For further information on this event, visit the official ATS site here.


November 9, 2011

Stiles & Losi win BRCA Micro Nationals Rd2

Stiles & Losi win BRCA Micro Nationals Rd2

Round 2 of the BRCA micro off road nationals took place in Telford last weekend. This venue was agreed at a relatively late stage in the series organisation process because another venue had to withdraw their application to host the meeting. The host club presented the drivers with a slightly unusual track, made up of mostly flat polished wood sections with minimal carpet and only a couple of jumps. Opinions were mixed, but in fact almost everyone admitted to enjoying the challenge of racing on an unfamiliar track style, and the racing was close and clean all day.

Read the rest of the report here


November 9, 2011

Halloween Classic double for Larry Fairtrace

Halloween Classic double for Larry Fairtrace

TOP Racing team driver Larry Fairtrace sent us this report from the 2011 Halloween Classic which took place last weekend at the Gate in Brunswick, Ohio. “We arrived late to the Halloween Classic. Friday all day was practice, but we had to work on Friday so we drove all through the night to arrive at the track Saturday morning at 7am. This gave us 3.5 hours of practice, racing was set to start at 11am. I practiced a few times with my Photon and made some changes based on the amount of traction. I arrived with the setup I ran at the IIC but it was pushy with too much all around traction. I migrated back closer to my standard carpet setup by the end of practice. I put my Rebel on the track one time in practice and it was very good right out of the gate. I was pretty satisfied with it and knew new tires would make it that much better so I shelved it until racing started and concentrated on my Photon.

Continue reading the report here


November 9, 2011

Root double at Thanksgiving Throwdown Rd1

Frank Root double at Thanksgiving Throwdown Rd1

TLR and Losi’s Frank Root, Cody Turner and Trevor Adamo were on hand at the opening round of the Thanksgiving Throwdown Series Saturday at West Coast R/C Raceway (WCRC). The track had fantastic traction, and a really fun and technical layout and the entry count was very strong at just over 150 and a great day of racing was had by all.

Continue reading the report here


November 9, 2011

Jason Branham takes RC Pro titles

Jason Branham takes RC Pro titles

This past weekend Agama/Pro-Line racer Jason Branham attended the RC Pro International Finals in Porter, TX,just outside of Houston, at Mike’s Hobbies and Gulf Coast Raceway and wrote this report. Gulf Coast Raceway is probably one of the finest race facilities you will find in the country and as host of the 2010 IFMAR Sedan World Championships, GCR was very excited to host their first major off-road race. The crew did a fantastic job with the layout which made for some very fast and close racing. I came into the Finals tied in points with Ryan Lutz in Pro Buggy and Mike Battaile in Pro Arena Truck so I knew right off the bat that if was going to take the titles then I was going to have to finish ahead of these guys as well as the rest of the field to do so.

Continue reading the report here


November 9, 2011

Sweep Racing Strong Glue Jr.

Sweep Racing Strong Glue Jr.

Do you ever reach into your RC bag for some tire glue and notice it has either dried out, or the nozzle has become clogged? This can be a frustrating and expensive problem as it leaves a lot of tire glue wasted. Sweep Racing is now offering their popular Strong glue in ‘Jr.’ size bottles with a child resistant cap to prevent clogging and to also avoid the purchases of an excessive amount of glue. You can now actually finish an entire bottle of glue.

Source: Sweep [sweepracing.com]