Red RC

August 10, 2011

2012 IFMAR 1/10 WC Hong Kong selection race Rd1

The TRC Racing Track hold the first round of the Hong Kong selection race series for the 2012 IFMAR World Championships in Thailand. Hung Cheung Hang (H-K1) was able to take TQ after four rounds of qualifying, also pulling the only 29 lap run during qualification. Luk Chi Hung took the second place on the grid with Samuel Chiu and Poon Chiu in third and fourth place respectively. The final saw a battle between eight sponsor drivers and two KM fans with their H-K1. Hang lead right away from the beginning until the end of the 30 minutes long final. Samuel Chui (Xray NT1) took second and Michael Cheung (Shepherd V10) third place. KM team driver Ray (H-K1) managed to get a fourth place and the only two non-sponsored drivers in the Top 10, Siu-Ming and Kwok-Wai (both H-K1), ended up in 5th and 8th position. Winning driver Hang also set a new track record with 20.9 sec and and he also was the only one who made the best lap in under 21 sec during the race. Now three races are left for the drivers to get one of the three entries for the 2012 IFMAR 1/10 GP world championship in Thailand.

Source: KM [km-rc.com]

August 10, 2011

Ty Tessmann wins Nitro Stampede II Race

Ty Tessmann got in touch to tell us about his recent success at the Nitro Stampede II Race in Calgary/AB. With some of the best drivers in Canada in attendance along with Richard Saxton from AE, he was able to take the TQ and win in all three classes including 1/8 scale Buggy and Truggy. In the Buggy class he left Team Associated’s Richard Saxton and Peter Tozer (Associated) behind and also managed to stay ahead of the pack in the Truggy class by beating Peter Tozer (Associated) and Dave Elia (TLR).

Click here to view the Truggy podium

August 10, 2011

Arrowmax MRX-5 rear lower arm shaft

Shortly after releasing front lower suspension arm shafts for Mugen’s MRX-5 1/8 scale on-road car Arrowmax now comes up with suitable parts for the rear end. Made from high-quality spring steel the shafts come as pair and are titanium-nitride coated for reduced friction and enhanced durability.

Source: Free Max [freemaxmp.com]

August 10, 2011

Knapp & Goncalves win 2011 ROAR Asphalt nationals

The 2011 ROAR Asphalt Nationals was held at one of the finest asphalt tracks in the US, Jackson RC in Jackson, NJ. In 12th scale, it was Andrew Knapp’s first time ever on asphalt with a 12th scale. With a little help from teammate and fellow podium finisher, Joel Johnson, Andrew figured it out in a hurry as he won the first three rounds of qualifying, securing himself the TQ spot. Andrew consistently set the fastest lap in every round of qualifying as well. In the triple A mains, Andrew took the wins in A1 and A2, and even lapped the entire field in A2. Mike Haynes places second over all with Joel Johnson completing the podium and Billy Spence finishing fourth.

Click here to continue reading the report

August 9, 2011

F.V.S.S. Futura 2012 tyre additive

Pirani RC in cooperation with F.V.S.S. announce a new odourless tyre additive called Futura 2012. Suitable for both rubber and foam tyres as well as asphalt and carpet tracks, the traction compound already showed its performance during the 2nd round of the Italian 1/8 scale on-road championships. The additive is best applied three hours before the run and comes in handy airtight cans with application brush.

Source: F.V.S.S. [fvssrc.com] and Pirani RC [andreapirani.com]

August 9, 2011

200mm South German Championship Rd6

The 6th Rd of the South German Championship was held the track of Rötz. In qualifying Patrick Nähr took the pole-position for the 30-minute finale with his Novarossi-powered Shepherd Velox V10 “eleven”, followed by Serpent driver Toni Gruber on second place and Shepherd teammate Torsten Müller securing himself the third position. Also in the main final Nähr was in a good mood and crossed the finishing line four laps ahead of his toughest rival Toni Gruber followed by Torsten Müller on third place rounding out the good result for Shepherd.

Source: Shepherd [team-shepherd.com]

August 9, 2011

Bittydesign MBX6 Force body shell

Bittydesign distributor Ansmann Racing release first information on the Force body shell for the Mugen MBX6. Featuring a cab forward design the body was used by 2011 European Champion Robert Battle at the recent 1/8 scale off-road European championships in Sand/Germany. The body gives the buggy more steering due to its cab design, provides better airflow around the engine, is made from 1.0mm Polycarbonate and available soon.

Source: Ansmann Racing [ar-rc.com]

August 9, 2011

Hobbywing SCT Pro controller

Hobbywing release a new speed controller for 1/10 scale Short Course trucks and 1/8 scale buggies. The speedo features dimensions of 53.5x36x36mm, is usable with 6 to 12 NiMH and 2 to 4S LiPo cells and has a 760A burst rating. The constant current allows for motors up to 6000kv with 2S LiPo batteries and up to 4000kv with 4S packs. The on-board BEC delivers 6V/3A, the controller features several software programmes and is being programmed using the fans 3-pin connector.

Click here to view another picture