Red RC

April 18, 2022

Exotek high performance Flite spur gears

Exotek have introduced 4 new high performance machined POM spur gears for all Exotek slipper eliminator hubs. Available in 104T, 99T, 94T and 89T, they are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much stiffer and truer than moulded nylon spur gears, they require three M3x6 button head screws (not included). These sizes are best suited for stand up or raised transmissions as they may be too big for most laydown transmissions.

Source: Exotek [exotekracing.com]

April 18, 2022

JConcepts SCT Landmines 2.2 x 3.0″ tires

Continuing to expand their Landmines lineup, JConcepts have created an all-new 2.2” x 3.0” performance all-terrain SCT tire. The Landmines, developed over a 2-year period of testing, tuning and analysis have reached the summit and now available to the SCT enthusiast. The design starts with a robust carcass carefully shaped and sized for a multitude of conditions and capable of driving over a variety of terrain while being down-to-earth enough to carry a scale appearance. The team spent considerable time with the split-block centre design which has been sliced, stepped, and recessed for flexibility and contortion over sharp, loose, and polished surfaces. The Landmines have alternating solid and cavity pads which is ideal for transitioning from smooth dirt or pavement into dirt, mud, and rocky terrain. Moving toward the edges of the carcass, the SCT tire has horizontal grippy pads with edge and channels to provide additional forward climbing bite.

Source: JConcepts [jconcepts.net]

April 18, 2022

Fenix Racing Classic Team Lotus 72 GL body

Fenix Racing are pleased to introduce another version of the Classic Team Lotus 72, which is fully licensed and approved by Classic Team Lotus. The previous release was based on the JPS version of the 72 while this latest release is fateful to the Gold Leaf branded version as driven in the 1970 and 71 seasons. This replica body shell is 1/10 scale and can be used on Fenix Racing Classique 2 and F1-70. as well as the Tamiya F103 & F104.

Source: Fenix Racing [fenix-racing.com]

April 18, 2022

T-Works MBX8R suspension mounts

T-Works have released a complete line up of suspension mounts for the Mugen MBX8R. Available in 4 versions, front lower suspension mount, as well as B, C and D mounts, they come machined from high-quality 7075-T6 aluminium while sporting a black surface coating and machined silver edge details. The suspension hanger was designed to work with the standard suspension inserts.

View the other different mounts here

April 18, 2022

2022 Speed King Tour Rd1 – Report

With the Speed King Tour in 2021 only managing to run two rounds because of Covid-19, the organizer decided to start the series again in 2022. The first round of Speed King Tour 2022 was held at Super Rajikon Saitama Omiya indoor tarmac recently. The race class names and regulations changed a bit, with the modified class becoming TC0, Stock class became TC1 and the TC2 class for amateur racers was previously the Super Stock class with only G Force ESC and motor being used. Following three rounds of Modified class qualifying, Rush/Axon driver Hayato Ishioka took TQ with his Yokomo/Axon TC10/2. Super Rajikon Saitama Omiya shop staff Kazuma Murai drove the same car as Hayato and got second position while Rush/Infinity driver Jin Sawada took third.

Continue reading the report here

April 15, 2022

Avid digital mini scale & aluminium heat tape

The Avid digital mini scale is a commonly used tool now in everyone’s pit arsenal, typically for filling diffs. With this 500g max weight scale you can now also measure all sorts of things such as your batteries, motors, etc. with a 0.01g accuracy. Featuring a flip cover to keep your scale protected, the LCD display is back-light for easy reading and can show multiple weighing units such as g, gn, oz, ozt, ct, t, dwt. Also new is their reinforced aluminium heat tape, which is lightweight at just 0.15mm thick, 5 meters (16.4ft) long, and 50mm (2in) wide. The strength is found from the fiberglass that is woven through the material and all rolled onto a nice handy tube. This can also be used on your body in high-wear areas such as your mudguards or even on your tank next to the pipe to help keep your tank and fuel from heat saturation.

View more images here

April 15, 2022

Mon-Tech Racing Trofeo GT12 body shell

Mon-Tech Racing have introduced their latest bodyshell for the GT12 category, the all new Trofeo GT12. Featuring an extremely low profile, and therefore reduced roll, this makes it very easy to drive and very competitive. The body is produced in Italy using high-quality Lexan polycarbonate and comes with a detailed decal sheet including headlights and grille stickers, window masks and wing mounting hardware.

View more angles of the Trofeo GT12 here

April 15, 2022

JConcepts RC10 & RC10 Worlds car titanium turnbuckles

JConcepts introduces a stylish, durable, and lightweight alternative Titanium turnbuckle kit for the popular original Team Associated RC10 and RC10 Classic vehicles in black colour. The base of the shafts design is centred around a .143” titanium hex size which gradually tapers down into a 3mm thread base design which accepts standard AE ball-cup configurations. The focus of the styling surrounds the lengthened adjustment hex area and the ‘fin’ cuts that rotate about the centre. The Fin turnbuckles are lightweight, and the original design brings out the glamour and quality that makes titanium one of the most sought, after exotic materials in the world. The JConcepts turnbuckles are produced with left- and right-hand threads with the left being conveniently marked for easy orientation. There are two sets, both include 8 pieces, which covers a complete RC10 & RC10 Classic or RC10 Championship Edition, Team car & Worlds car, including servo to steering turnbuckle and centre link between driving and idler bell crank.

View the Worlds set here