Red RC

September 6, 2024

Avid B7 Machined Idler Gear Set

New from Avid Racing Concepts is this machined idler gear set for the Team Associated RC10B7 2WD Buggy. Machined out of self-lubricating plastic so they are perfectly true, they allow the transmission to spin much more freely. Having tested the gears for a couple of months with huge success, the only time they could strip them was on a very high bite carpet track, with a direct drive, and the gear diff in the highest 3 position. The way the AE transmission is designed is that in the higher positions you are increasing the gear mesh gap and the removal of the slipper put a lot of strain on them when landing at full throttle. They were also tested on the same track in Mod with a slipper and there were no issues.

Source: Avid [avidrc.com]

September 6, 2024

Xray X8 Aluminium Side Belt Pulley 34T/35T

Xray has added two new Aluminium Side Belt Pulleys for its X8 1:8 Onroad chassis for adjustment of front tyre rotation speed in relation to rear tyre rotation. Available in 34T/35T options, the pulleys are CNC-machined from premium lightweight Swiss 7075 T6 aluminium and are strategically lightened. They are finished with a black hard coated for extra durability and long life.

Source: Xray [teamxray.com]

September 6, 2024

Revolution Design B7 Aluminium Differential Case

Germany’s Revolution Design Racing Products continues it release of option parts for the Team Associated RC10B7 1:10 2WD Buggy with this Aluminium Differential Case. Made from 7075-T6 aluminium the differential case improves oil cooling due to the material’s properties, ensuring more consistent handling throughout the entire runtime. Precision machined and hard anodised for maximum durability, it weighs in at only 9.6g. The case is Laser-etched with the RDRP logo for a premium look.

Source: RDRP [revolution-rc.com]

September 5, 2024

Infinity IFB8 Shock Stroke & Rebound Gauge

New for its IFB8 1:8 Buggy platform, Infinity has released this Shock Stroke & Rebound Gauge. Allows easy measurement of important shock length while mounted on the vehicle during suspension setup. Supports stroke from 60mm to 150mm. The Gauge is also compatible with buggies from other manufacturers.

Source: Creation Model [creationmodel.net]

September 5, 2024

Ielasi Tuned EFRA2701 Factory pipe 1:10 Onroad

After the positive debut at this year’s EFRA 1:10 Nitro Touring Car European Championship in France with its official drivers, Italian engine tuner Ielasi Tuned has released its new EFRA2701FT muffler. Like its previously released 2185FT for 1:8 Onroad and 2186FT for 1:8 Offroad, their latest 1:10 muffler is in a single piece further optimising performance as well as removing the ‘annoying’ exhaust gasket. Featuring a Hard Coated treatment, the EFRA2701FT gives improved in performance and consumption.

Source: Ielasi Tuned [ielasituned.com]

September 5, 2024

RC Discharger flat iCharger Battery Temperature Sensor

RC Discharger has released a new a new flat iCharger Battery Temperature Sensor designed to seamlessly integrate with your iCharger. The flat sensor design ensures optimal contact for LiPo or LiHV batteries, making it ideal for precise temperature monitoring during both charging and discharging cycles. Built with high-quality materials for long-lasting performance, the sensor is equipped with a Male 3-pin JST-XH or Futaba connector with 36 inch length 22 AWG Silicone lead.

View more images here

September 4, 2024

2024 12-hour Italian Endurance Championship – Report

Minicar Fontanellato racetrack, located in the province of Parma, hosted the 2024 Italian Endurance Championship, a 12-hour endurance race featuring teams qualified through the Italian Cups in Northern and Central Italy held last spring. The competition, sanctioned by the Italian motorsport and RC Car Racing Federation ACI Sport, which started at 9:00 PM on Saturday, August 31, and ended at 9:00 AM on Sunday, September 1, provided excitement and spectacle for the enthusiasts present. The cars allowed by the federal regulations in Endurance competitions are based on traditional four-wheel-drive Touring chassis, components, and mechanics. The propulsion is electric and restricted, both in the ESC and motor component, in order to guarantee a balance of performance among all competitors. Bodyshells, regulated by a specific homologation list, are strikingly realistic and referable to the LMH segment of the FIA World Endurance Championship.

Continue reading report here

September 4, 2024

SMJ Twister Thin Type Rear Bumper Side Stiffener

Adding to its range of touring car body accessories, Japan’s SMJ has introduced this Thin Type Rear Bumper Side Stiffener for use with the 190mm Twister body from Xtreme Aerodynamics. Adding no noticeable weight even when used on ultra-lightweight bodies, this stiffener is designed to prevent the rear bumper from getting caught inside due to unexpected incidents during races. Pre-cut to fit perfectly on Twister and Twister SPECIALE bodies. Equipped with double-sided tape for easy application directly onto the body.

View unmounted stiffeners here