Red RC

March 17, 2011

Tobias Hepp confirms move to Xray

Xray Germany have announced the signing of young German star Tobias Hepp to race for their on road team in 2011. The former Serpent driver will race the brand new Xray RX8 with Orcan GT7MH-Power, Orcan fuel 25+ and ATS-Tires. Tobias will race the Nitro-West Masters and the West German Championships, Luxembourg EFRA GP and the European Championship in Hildesheim, Germany (200mm) and Luxembourg (1/8th). He had this to say:

After 3 successful years with Serpent I’m happy for the new partnership with the Xray-Gemany/Orcan Team in 2011/2012. I’m looking forward to successful future.

Source: SMI [smi-motorsport.de]

March 17, 2011

T-Work’s Racing MT-4 transmitter skins

T-Work’s Racing have released this new skin decal for the new Airtronics/Sanwa MT-4 transmitter. Available in 3D graphite or shiny graphite versions, it is easy to apply, will stay in good condition for a long time and when you want to remove it, it wont leave any nasty residue. Supplied pre cut on an A4 sheet.

Source: T-Work’s [rc-tworks.com]

March 17, 2011

CRC Spur gears, top plate & camber gauges

CRC have released a number of new products starting with these new molder spur gears. The new spur gears use a 16 ball design to increase contact surface so your diff nut requires less tension to keep the diff from slipping. Less tension on the diff parts means more racing and less rebuilding. These new gears also use 3/32″ balls rather than 1/8″ to keep the rotating weight down and not sacrifice punch by adding the extra balls. Available in 76, 80, 88 and 96T. Also new is the rear top plate which closes in the rear pod, making for a stiffer, stronger pod. This does add some weight as you will have to replace the micro left bulkhead with another motor plate, but is especially helpful in modified where the extreme horsepower can cause some flex. This also makes the rear bottom plate more resistant to breakage during crashes. Finally there are new carbon fiber camber gauges that allow you to quickly and accurately set your camber. Works on 12th and 10th scale cars with measurements from 0.5 to 3.0 in 0.5 increments.

View the other products here

March 17, 2011

Stephane Bouche wins French season opener

The first round of the French 1/8th scale on road championship took place in Toulouse last weekend. During qualifying the track was wet and making the best of those conditions was Motonica/Vox driver Sebastien Zatla who took TQ in front of Shepherd/GiMar driver Richard Volta and Motonica/Max driver Stéphane Bouche. In the final Richard Volta took the lead in the first laps, but after a few minutes it was young talented driver Arnaud Mathieu who took the lead only to run out of fuel. One minute before the end of the the race, it was Volta in the lead by 2 seconds from Stephane Bouche with his Motonica team mate Jerome Papaconstantinos in third. All drivers were pushing hard after 44 minutes of racing when Volta made a mistake at the end of the straight allowing Stephane Bouche to the front and take the win on his debut race with the new Motonica P81 RS. Richard Volta recovered to take 2nd and Jerome Papaconstantinos took 3rd.

Source: Andelle Competition [sasandelle.free.fr]

March 17, 2011

Surikarn Chaidajsuriya re-signs to Xray

Xray have announced the re-signing of 2002 ISTC World Champion Surikarn Chaidajsuriya. The Thai driver is a great all round driver taking wins in both on road and offroad and will run the Slovakian company’s T3’11, NT1 and 808 cars this season. Surikarn had this to say:

I’m very happy that I have extended my contract with Xray. I will continue to race and test with Team Xray in the 2011 season, as well as continue using great Hudy products. I would like to thank Xray Slovakia and Asia Model Company (Xray and Hudy Thailand Distributor) for their great support. We had some very good results in 2010, and I will try to get even better results in the 2011 season.

Source: Xray [teamxray.com]

March 16, 2011

Cavalieri leads Associated’s challenge at EOS pilot event

Two time World Champion Ryan Cavalieri is to contest the ‘Euro Offroad Series’ pilot race with Team Associated confirming that one of the biggest names in off road racing will travel to Sweden for the April 1-3 event. The 24-year-old reigning 4WD US National Champion will team up with former European Champion Peter Pinisch and Petit RC Race winner Paul Bradby as part of the Team Associated challenge in Tomelilla where they will go head to head with official team entries from Losi, Tamiya and Team Durango. Last week Team Losi Racing confirmed 2011 Reedy International Race of Champions winner Dustin Evans will make the trip from Colorado to contest the indoor clay event. Commenting on the latest big name driver announcement, EOS Race Director Scotty Ernst said:

We are so excited that Team Associated are sending Cavalieri to our pilot event and together with Losi confirming Dustin Evans’ entry it is a massive endorsement for the EOS and what we are trying to create for 1:10 Off Road in Europe. The quality of the entry is going to make for great racing and with most of the top guys also doing Short Course Truck I think we can really showcase this class which back in the US has done great things for our hobby.

Read the full release here

March 16, 2011

Alex Hardt switches to Novarossi

Reigning German Junior Champion Alex Hardt has made the switch to Novarossi for the upcoming season. German Novarossi distributor, Shepherd Micro Racing, will be supporting this young talented driver with the latest Novarossi off-road engines. Alex will race all important national races as well as some selected international events like the European Championship A, the Neo11 Race and the International Warm-up in Bischofsheim. His goals are well defined:

I would like to defend the German Junior Champion title and achieve a top result at all races that I attend. I choose Novarossi engines because the performance is outstanding. After a few test it was clear that I can achieve my goals for the 2011 season with these premium engines. Shepherd Micro Racing supports me in the best way possible and I’m looking forward to working together with them closely.

Source: Shepherd [team-shepherd.com]

March 16, 2011

ETS Rd4 participants to collect Hudy 3.0mm Allen wrench

With the fourth round of the Yokomo Euro Touring Series taking place this weekend in Poland, event sponsor Hudy have been in touch to remind entrants that they can once again collect their free Limited edition tool, which this week will be a 3.0mm Allen wrench. Given to Pro Stock and Hobby drivers competing in Europe’s largest racing series, the Slovakian company has already handed out their 1.5mm, 2.0mm and 2.5mm wrenches at the previous 3 rounds. Part of their 25 Years Anniversary limited edition series the tools feature super-lightweight CNC-machined Swiss 7075 T6 aluminium handles that reduce weight by 30% as well as a diamond-pattern surface for unsurpassed grip. The new generation of Hudy tips is hand-made from special world-renowned, top-secret, self-developed Hudy Spring Steel, individually precision-ground, sized and shaped for perfect fit with fasteners and the unique hardening processes make the tips ultra-durable. Each tool includes a press-fit protective black cap in the handle end; optional color-coded plastic caps (violet, red, blue) are available to customize the tools to your preferences. A laser-engraved ETS logo is the finishing touch.

Source: Hudy [hudy.net]