RC4wd has teamed up with Mickey Thompson tires to bring you this huge new offroad tire. As RC4wd promised, they have brought out several licensed tires and this is only the beginning. The new Baja Claw TTC, is a tried and true offroad tire and stand in at 4.75″ tall. This true replica of the 1:1 Baja Claw TTC tire was specially built for Top Truck Challenges.
Source: RC4wd [rc4wd.com]
New from Robitronic for your Kyosho Mini-Z is this oiled ball bearing set. Sanctioned for use in most stock-class races, these bearings not only enhance your runtime but also push your lap times considerably. Complete set includes 4 x 2x6x2,5mm and 3 x 3x6x2,5mm bearings.
Source: Robitronic [robitronic.com]
The 3rd and final round of the Malaysia National Championship (MNC) was held under sunny conditions and the fight for the championship was between Mr. Norazam and Mr. Azri, with only three points separating them, with Azri with the advantage. The race saw many drivers converging from all over Malaysia, special mention for Mr. Eric Ma and his friends from Penang, Mr. Lawson and James Ki from Batu Pahat and other places from all over Malaysia, with 35 drivers competing in the Pro Stock 10.5/11.5T alone.
Continue reading the report here
Russian company Awesomatix, who we have been following over the past few years, has gotten in touch with us to show off their almost final car. The car in the photos is 99% production version, with some small part colours and material changes still expected before the final release. This extremely unique car can accept a transverse and longitudinal motor layout and comes supplied with the two different motor mounts as well as two different upper decks for fine tuning the flex of the car. Their team is currently giving the car its final shakedown and will be ready in time for the following rounds of the Euro Touring Series, the next of which takes place in February in Austria.
View more photos of the car here
Serpent have announced that Portuguese front runner Rodrigo Luis has joined their team. Rodrigo was pleased following testing of the Serpent 811 Cobra buggy and is looking forward to the new challenge. He had the following to say, “The 811 Is one of the best Buggies available at the moment, a very fast car, reliable, easy to drive and tune and transmits lots of fun driving it.” Looking forward to next season he believes it will be one of the most exciting with a very competitive National series as well as International races.
Source: Serpent [serpent.com]
Durango has announced that the DESC410R has passed all the pre-production tests and has been given the green light for production. They now just need to check the final packing and sign off the instruction manual, and if all goes to plan then the DESC410R will be shipping at the end of January.
Source: Durango [team-durango.com]
Round 2 of the Team Durango Winter Series took place on Sunday 28th November and despite the bitterly cold temperatures, 110 drivers attended the event. The track for this round of the series featured much less high grip carpet than round 1. The carpet of the touring car track had been rolled away leaving the wooden boarding as the racing surface for the majority of the track. This surface gave a medium level of grip, allowing the cars to slide around a little. Other surfaces were used, there was a carpet section at the start of the straight and the huge table top jump in front of the rostrum was also carpeted. There was a slippy surfaced hairpin on the corner before the wall ride. The table top was a new feature this time and saw the cars getting some big air time. As well as this feature there were four smaller jumps around the track.
Continue reading the report here
Orcan engines have been successful in the categories on-road scale (.12) and off-road (.21) for years and have achieved lots of national and international victories and championships. Starting with the 2010 season, SMI Motorsport from Germany is working on the development of an Orcan engine for the highest level of RC on-road racing, the 1/8 scale nitro class. A couple of drivers have been involved in testing the Orcan prototypes which are based on 7-port and 9-port engines from Novarossi and were specially prepared by Michael Heinrich (MH-Tuning). Powered by one of these Orcan test engines Uwe Baldes has achieved a remarkable success at the final round of the Nitro-West-Masters, a series of four races, held in October at Dormagen near Cologne. Using the 7-port version he captured pole position and set a new overall lap record (15,179 sec) beating the old record held by Michael Salven. “I have tested this .21 prototype engine on several circuits. This engine has proven its excellent performance with lots of torque at low revs and an impressive driveability – both valuable aspects especially for those tracks we are used to race in Germany”, concluded Uwe Baldes. “Furthermore the fuel consumption is really low – it is already a real Orcan engine and a promising basis for the future.” Also Bertram Kessler of SMI Motorsport is pleased by the test results. “With the new Xray RX8 hitting the market in 2011 it is logical that we are going to launch a .21 on-road power unit which offers the usual quality features of all Orcan engines. In the period of testing we have gained valuable experiences which will help us to develop a powerful and high efficient Orcan engine for 1/8 scale racing.”
Source: SMI Motorsport [smi-motorsport.de]
