Red RC

February 7, 2022

Associated DR10 metal gear conversion

Pull up to the starting line with confidence, knowing that your transmission is up to the task. Convert your existing Associated DR10 transmission to all metal gears and hardened steel top shaft, capable of handling extreme power. Available separately you can also just replace your standard aluminium top shaft and gear with this hardened steel shaft and metal gear for increased strength and durability. Compatible with DR10, Pro2 SC10, RB10, SR10 & Trophy Rat.

View the hardened steel shaft here

February 7, 2022

Völker wins ETS Rd5 in Daun and is overall champion

ETS Rd5 took place at the Sporthotel Grafenwald in Daun/GER last weekend. The race saw 285 racers in the six ETS classes, and the event started with a free practice day on Thursday, followed by 4 rounds of qualifying and triple finals for everybody. The track layout was technical, challenging, and perfect for some intense ETS racing. In the Matrix Modified class it was a two-horse race for the win between Marc Rheinard and Ronald Völker. After a hard fight in qualifying, with both drivers taking two out of four rounds, Völker was able to secure the pole position with the faster overall runtime compared to Rheinard. Christopher Krapp was in striking distance to the leaders all time and lined up third on the grid.

Continue reading the report here

February 7, 2022

NathoBuilds titanium lower arm studs

NathoBuilds titanium lower arm studs are a great way to help you maintain your 1/10th buggy, truck or drag car more effectively, without the worry of stripping out screws on the lower shock. The hex design sports a flange neck that will allow you to firmly grip the stud, which will firmly tighten the arm and moves the shocks 3mm forward in the car, giving you more clearance from the spring to the turnbuckle. This design also improves cars handling on low and high bite surface.

Source: NathoBuilds [nathobuilds.com]

February 7, 2022

Rêve D 2022 black hoodie

Rêve D have announced the first release of their new for 2022 apparel line that starts with the release of this new Hoodie. The black hoodie has the Rêve D logo on the front & back and a white logo printed on both sleeves, making it a striking design on the circuit and street. The Rêve D Hoodie is a limited quantity rare model with a total of 300 outfits in all 8 sizes.

View more images of the hoodie here

February 7, 2022

Yokomo Zero 3 brushless motor

Yokomo have updated their popular Zero line of motors with the introduction of the heavily updated Zero 3. With five different turns ranging from 8.5T to 21.5T, the lineup is suitable for any category. The motor case, which has undergone some major changes, is no longer a single piece with the new design improving heat dissipation and reducing weight to the same level as race motors. Motor timing can be adjusted up to 60 degrees to match the power feeling settings on the ESC side for a variety of output characteristics. Not only is it a sensor type motor with excellent response, but it also has a dual sensor specification that allows the sensor cable connector to be installed in two places, making it a smart addition to any machine.

View more images of the Zero 3 here

February 5, 2022

Exotek B6.3 HD alloy front bulkhead

From Exotek comes this heavy duty, 7075 alloy constructed 10 gram front bulkhead for the B6.3-B6.1, T6.1, SC6.1 and all ‘6’ series Associated 2wd buggies and trucks. This HRC (high roll centre) option raises the inner hinge pin by 1mm and has 2 settings for kick up, 25° and 30°, depending on which direction it’s mounted. Customised polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue parts.

Source: Exotek [exotekracing.com]

February 5, 2022

Hasi Tuned R21 7 port nitro engine

Hasi Tuned have introduced their new 2022 R21 7 port nitro engine model intended for the use with 1/8th on-road cars. Based on the 7 port O.S. R21 engine, the new Hasi R21 have a new timing and new improvements on the cylinder. These upgrades are needed to have a perfect adjustment with the new fuel rules from EFRA. Also available with many options, such as break-in service, Hasi backplate, high performance venturi or rear ceramic ball bearing.

View more images of the R21 here

February 4, 2022

Mon-tech Racing 2022 Formula wings

Mon-tech Racing have presented their new Formula wings aimed at reproducing the 2022 F1 regulations. After almost a year of work between drawings, prototype printings and track tests, they were finally able to move to a production stage. The front wing has two different types of additional flaps and, as such, it is able to offer three distinct race trim configurations, low, medium and high downforce. The rear wing has been developed to give maximum downforce with the lowest possible drag. The new wings can be installed on any Formula car model currently on the market.

View more images of the wings here