Red RC

October 2, 2009

Nosram Pure Evo BL motor Tuning parts

Nosram have released some new aluminium tuning and cover parts that improve the performance and style of your Pure Evo brushless motor. Due to their design, the motor has better heat-dissipation and air-flow, resulting in a lot cooler running temperature for your motor which helps improves consistency and efficiency, resulting in better power even to the last lap. The lightweight front housing improves air-flow for a lower running temperature, as well as lowering the overall weight of your motor, while the aluminium end cover sports cooling fins to improve the heat dissipation significantly compared to the standard plastic version.

Click here to see the end cover

October 2, 2009

Mark Green wins BRCA 1/8th Rd8

Round 8 of the BRCA championship was held at the Mendip circuit for the second time this season. With Bristol airport being a small drive away and due to the completion of the Irish season, a small contingent from Ireland arrived, including the vastly experienced Clive Connelly (Mugen) and Ian Campbell (Shepherd). The entry of 48 drivers was one of the highest all season and with the addition of some old faces, the future is starting to look brighter for this section. The weather forecast for the weekend was bright which would allow a lot of testing to be carried out in order to find the perfect setup. With top 200mm driver, Kyle Branson making an appearance for the first time this season and the presence of the top Irish drivers would make it difficult for the usual top 10 to be sure of a main final qualifying position and so the pressure to perform was considerably increased.

Continue reading the report here

October 2, 2009

LRP S8-BXe Team Brushless buggy

After showing it for the first time as a prototype back in February, LRP have finally released the new electric version of their S8-BX buggy, called the S8-BXe Team. Essentially the same front and rear, the main difference is to the central part of the car where the engine has been replaced with a brushless motor and the fuel tank with the battery mount. Due to the design of the S8 BXe, the choice of motor and battery is simple, fitting all common electronic components and depending on your preferences and applications you have the choice, with all ROAR legal motors and LiPo batteries able to be mounted. A conversion kit for LRP S8 BX Premium RTR and S8 BX Team Kit is also available and allows you to easily convert your nitro car, quickly and economically into an electric version.

Click here for the full feature list

October 2, 2009

Kyosho Inferno series Brushless conversion kit

Kyosho America have introduced the new Inferno series brushless conversion kit that will convert any Inferno series product, regardless of its class e.g. on-road or off-road. Included in the kit is all of the hardware including a universal one-piece molded plastic radio box and battery tray which is designed to fit either 7.4V LiPo packs or 7.2V NiMh packs. Also included is an easy mesh machined aluminum motor mount that uses a single top screw design that can be easily accessed for perfect gear mesh adjustment.

Click here for more details

October 2, 2009

Racers Edge SC RaceCase Transporter bag

New from Racers Edge, the SC RaceCase was inspired by the emerging Short Course class of vehicles, but its capacity and design reach far beyond. With the optional mid-deck installed the case can carry two on road sedans up to 200mm and this would also include any minis or smaller, like HPI Cup Racer sedans. Once the mid-deck is removed the RaceCase can transport an 1/8th scale buggy with the tires and wing on, comp and scale crawlers, 1/10th scale off road trucks and buggies, and of course Short Course trucks like the Traxxas Slash and Team Associated SC10. It will also carry the 1/8th scale versions of this class like the Team Associated RC8. An integrated radio compartment offers easy transmitter storage, or extra room for tires, tools, or whatever else you can think of. There are also two external pockets with tough zippers for extra storage, while reinforced carry handles in two locations offer comfortable carrying positions no matter what you’re transporting. The shoulder strap also offers a hands free carrying position for the ultimate in comfort and convenience.

Click here for more pictures of the case

October 1, 2009

HPI Racing bullet style battery connectors

HPI Racing’s new high-amp, gold-plated, bullet style battery connectors allow racers and hobbyists to convert their batteries to low-loss, ultra-efficiency connectors for the ultimate in power and convenience. These connectors can be used to make easy plug adapters to fit any of the various types of plugs on the market, spares for the Flux Motiv and Flux Blur speedos, or on their own for fast and simple connections between batteries, speedos and motors.

Source: HPI Racing [hpiracing.co.uk]

October 1, 2009

Dynamite Fuze 1/10 and 1/18th scale BL Systems

Dynamite now makes it possible to upgrade 1/10th and 1/18th scale vehicles to the performance associated with brushless technology. It’s never been easier or more affordable thanks to their Fuze line of 1/18 and 1/10 scale brushless motors, ESCs and motor/ESC combos. Featuring multiple Kv ratings per scale, along with combos that come pre-wired and ready to install, Dynamite’s Fuze brushless systems claim to represent the ultimate in power, flexibility and value.

Click here to see the 1/18 system

October 1, 2009

Team Losi Racing 8ight/8ight-T 2.0 starter box

The Team Losi Racing 8ight/8ight-T 2.0 starter box was engineered and designed by Losi to be the perfect starting tool for the 8ight and 8ight-T. Now owners of both vehicles can use one powerful starter box to get their vehicle running quickly and efficiently. Unlike conventional starters, this starter box does not require positioning pegs, eliminating the need for measuring or major assembly. And it is designed to fit the majority of 8ight based platform machines.

Click here for the full feature list