Red RC

September 27, 2024

Yokomo Drift Car Double-Bearing Front Axle System

Designed for compatibility with their RD, SD, and MD series of 1:10 Drift cars’ front axles, Yokomo has introduced this double-bearing front axle system which significantly reduces friction by distributing load across the two bearings. This minimises rotational resistance in the front tires, enhancing overall performance. The axle shaft, made from high-quality steel but reduced to a Φ3mm diameter, is engineered to lower both weight and rotational moment. This design enables smoother rolling during acceleration, providing an extra boost when exiting corners while also preventing wheel spin. Additionally, tread width can be adjusted by simply replacing the included spacers, offering greater flexibility in tuning.

View more images here

September 27, 2024

Hobbywing XeRun XR10 PRO DR Drag Racing ESC

Hobbywing has released a new Drag Racing version of their very popular & successful XeRun XR10 PRO ESC. Features a high-performance 32-bit M4 microprocessor, it uses software optimised and based on the world championship winning XeRun XR10 PRO G2S to provide the best control and performance for Drag Racing. Compared to the XeRun XR10 PRO G2S ESC, the response time is reduced when the throttle acceleration is set to the maximum at 30. The ESC comes standard with a 9900uF ultra-large capacitor. The capacitance is increased by nearly 9 times to ensure that the ESC voltage remains stable during extreme power output. A frameless fan with patented technology is adopted to dissipate a large amount of air through the sides of the fan. In addition, the internal power board is covered with a copper heat-conducting busbar to generate internal heat transfer to the integrated casing radiator. The heat dissipation system ensures that the ESC is always reliable and in good heat dissipation condition at all times.

View more images here

September 27, 2024

Kato takes Q1 in Indonesia

Having set the pace in seeding practice, Kouki Kato carried that form into qualifying to TQ the opening round at the season finale of the Asian Buggy Championships in Indonesia, but only just. While putting together a perfect error few 5-minute run, the Infinity driver didn’t have the same outright pace as the morning with local Sworkz driver Jason Nugroho coming to within 0.1 of a second of denying him the top spot. With visiting drivers still finding their way in terms of how the track conditions change over the day, another local to open qualifying with a strong showing was track owner & builder Adrian Wicaksono who took his Team Associated to third ahead young Australian Christian Wolhunter.

Continue reading here

September 27, 2024

Takashima D-13 404SBS-E Wireless 2.4G Receiver

Hong Kong’s Takashima D-13 has launched its latest 2.4G Receiver this time to work with the Futaba 10PX. After six months of testing, they have produced a 2.4G wireless four-channel receiver that supports the F-4G communication protocol and which can be perfectly paired with the 10PX and supports software upgrades. They have reduced the size of the receiver to 27.5 x 18.5 x 20.5mm which weighs in a just 6.5 grams. Supporting a working voltage of 3.7-8.4V, unlike their previous Takashima D-13 receivers, they have also redesigned the case making the product better compatible with Futaba’s original servo plugs without the need for modification or trimming.

Source: Takashima D-13

September 27, 2024

Kato Top Seed at Asian Buggy Championships Finale

Kouki Kato is the Top Seed at the season finale of the Asian Buggy Championships, the Japanese driver leading an Infinity 1-2 in Indonesia from fellow countryman Naoto Matsukura. Racing on the completely natural dirt West Side Raceway track which is proving a big hit with the visiting drivers, Kato set the fastest two consecutive laps in the single seeding round. The only driver to dip into the 40-second lap times, Kato ended up almost 1-second quicker than Matsukura over the 2-laps. A regular in the Asian Buggy Championships finishing on the podium at the previous round in Brisbane, Sworkz driver Christian Wolhuter opened his third race of the current season with a Top 3 time. Just 3/10th back on the Australian, Indonesia’s own Rama Tribudiman took his Kyosho to fourth fastest time, the local racer saying afterwards that the traction is completely different to what he used as a result of the large entry who have made the trip to Jakarta this weekend so bring a close to the second season of Scotty Ernst’s Asian Buggy Championships.

Continue reading here

September 26, 2024

Atomic MRX Double Wishbone Suspension Conversion

Specialist 1:28 kit manufacturer RC Atomic has released this Double Wishbone Suspension Conversion Kit for the MRX pan car series with it launched at the start of this year. Double wishbone suspension (DWS) for the MRX features machined 7075 aluminium bulkhead and arms. Every parameter is adjustable such as camber angle, ride height, upper arm height, camber gain, caster angle and the kit comes with 0.5 degree caster mount while optional 1.5 and 3.0 degree mounts are available separately. Quick and easy adjustment of camber angle with Steel turnbuckle included, this is a system for experts and will require advanced car setup knowledge. Compared to single arm of SF system, DWS system will offer more and faster mid corner steering.

View more images here

September 26, 2024

Willspeed B7 73mm Arm Wide Pivot C and D Block Set

Willspeed is now offering this 73mm Arm Wide Pivot C and D Block Set for the Team Associated RC10B7 2WD Buggy. That’s right, a wide pivot set to be used with the 73mm Wishbone from the B6 series.  This increases the pivot width +5mm each side (10mm total) and MUST be used in conjunction with the AE #91853 or #91873 73mm Rear Suspension arms.  When used in conjunction with AE #91853 or #91873 73mm Rear Suspension arms this retains the original kit B7 position of the outside (Hub) Hinge Pin.  This leaves the track width unchanged but gives the short arm, wide pivot setup. The wide pivot gives the car more on power steering and more stability when cornering and will allow the car to centre (square-up) faster coming through the last third of the turn as the driver is getting on power.  This product includes both C and D Blocks and must be used as a pair.  Both items follow design trends from our proven standard geometry parts. D block remains in Willspeed’s full brace fashion which has been highly popular for ultimate reliability.

Source: Willspeed [willspeed.co.uk]

September 26, 2024

RaceformRC 1:10 PRO Bodypost Lazer Tracer

Raceform RC has introduced its new PRO Bodypost Lazer Tracer, to accurately align the location of bodyposts on 1:10 Onroad chassis in both EP 190mm and GP 200mm body shells for tracing the location over to a new body shell. This Self-centering system enables the holes to be perfectly aligned to the chassis. This 1:10 PRO Bodypost Lazer Tracer for vertical posts is the only tool that is able to trace the position of the body post, perfectly and precisely, onto the bodyshell in preparation for reaming. Be it unpainted or painted, it is the only risk free tool in the world that saves you time and stress, and also a system that will change how we locate the bodypost position. Your body will look better than ever, improved consistency between changing bodies, and save you from damaging your nicely painted body. With a Perfect Self Centering System, you are assured of proper air flow and results in a more predictable drive.

View more images here