Red RC

May 2, 2022

Reedy SC500X ESC & Sport 550 15T 3-slot motor

Tested and proven, Reedy’s SC500X is a simple to use, economical, and powerful ESC for enthusiasts of all skill levels. Excellent forward, brake and reverse feel, a wide range of adjustability, and robust hardware make the SC500X suitable for a variety of 1:10 on-road and off-road applications. This powerful, yet durable combination comes standard in Team Associated’s Apex 2 Hoonitruck truck but is suitable for a variety of vehicles where an economically priced brushed system is preferred. It now is available as a combo with the Sport 550 15T 3-Slot motor.

View more details here

May 2, 2022

Klinik RC universal pro droop system

One of the most critical adjustments on 1/8 Buggies and Truggies is droop. After doing months of research with all the available tools on the market Klinik RC feel there was a better way. Some were almost 1mm off from advertised measurements, inconsistent and frankly poor quality. They wanted a system that is precise, consistent, super simple, small and lightweight for hauling. Measuring shock length only goes so far. The inconsistencies possible in hubs, arms, links, left to right and front to back is incredible. Tighten up your race program with Klinik RC’s universal pro droop system. This set works on both Buggy and Truggy and no other pieces need to be purchased. Machined from premium 3mm carbon fibre, weighs close to nothing and fits in the palm of your hand. The system comes with a super handy pouch to store components when not in use. “0” on the gauge indicates the centre of the axle is set to the bottom of the chassis, “+” indicates droop above the chassis, while “-” indicates droop below the chassis. Very simple.

View more images of the pro droop system here

April 30, 2022

Xray XT4’23 1/10th 4wd Electric Truggy

Xray have released full information on their new for 2023 XT4 4wd Electric Truggy. The truck sports a new chassis layout with diff, motor and battery moved forward that makes the XT4 faster and easier to drive. The front & rear bulkheads feature a horizontal split design (HS) to retain easy diff access while adding the valuable new diff height adjustment. The front & rear HS bulkheads incorporate a diff height adjustment using eccentric bushings. The design of the HS bulkhead’s inline bushing for the bevel drive gear keeps the gear properly matched to the diff height position. It also creates a more linear orientation for the front center drive shaft, reducing the CV joint angle for increased efficiency and decreased friction and wear. The height of the rear center drive gear is also adjustable to match the height adjustment of the differential. The new pinion gear is shorter to move CV joint closer to the differential, reducing the driveshaft angle and improving drive train efficiency. The new chassis layout moves the center diff, motor and battery significantly forwards and increases stability, allowing for more aggressive landings and making the truck more forgiving. The central drivetrain features new outdrives and dogbone driveshafts that offer reduced maintenance compared to previous CVD drive shafts. The servo mount was redesigned to fit the new frontward chassis layout and features two aluminum stands with graphite stiffener from top. Other new updates include to side guards, electronics plate, shock towers, suspension holders, battery posts, body posts and steering system.

Source: Xray [teamxray.com]

April 29, 2022

MiBorg X4 RCV driveshafts

MiBorg presents its innovative RCV driveshaft designed to Xray X4. A steel-to-steel interface between wheel axle and bearing hopes to provide less play and less bearing wear compared to the original assembly. It’s combined with the MiBorg original pin less wheel axle adapters for a better wheel concentricity. The driveshaft centre of rotation is aligned with the steering axis to ensure an easy handling of the car. The RCV concept is still utilizing the design of full-scale cars, and is an advantageous alternative to ‘double joint’ shafts. The very high level of accuracy and durability offers no play and no wear run after run. The driveshaft use balls instead of cross pins to drive the wheel axle, which results in less vibration even with high steering angles.

Source: MiBorg [miborg-rc.com]

April 29, 2022

Bittydesign Jota 1/7 GT body shell for Felony

Bittydesign have released their second body shell for Arrma on-road cars. After the success of the very first model ‘Seven65’ launched a year ago, today they introduce the ‘Jota’ for the Felony 1/7 scale chassis. Making reference to a famous Italian supercar, they took inspiration to design the lines of the Jota body shell adapted to the production needs, the phase of refinement took several months to optimise every detail. Jota is a stunning looking GT body designed to push your 1/7 model to the limit, whether you want to test top speed on the straight or drifting with your rc mate in the parking lot behind your house. Made with high quality and genuine 1.5mm polycarbonate Lexan, the kit includes a complete set of screw, nuts and large plastic washers to fix properly the rear wing and the front splitter.

View more angles of the Jota here

April 29, 2022

Element RC Enduro Knightrunner Trail Truck blue RTR

Aimed towards the serious RC rock crawler enthusiast, the new Element RC Enduro Knightrunner 4×4 RTR is packed full of performance features that are sure to impress. Now with blue body and different colour wheels. The Knightrunner 4X4 RTR features injection-moulded grill, mirrors, door handles, wipers, and more to heighten the scale realism of the thermoformed polycarbonate blue body designed by James Knight of Knight Customs. The extra decal sheet includes additional overlanding graphics and sponsor logos to outfit the Knightrunner 4×4 for a custom look. Element RC has partnered with industry-leading aftermarket manufacturers to provide the highest level of scale realism possible. These partners include: DeMello Off-road, Front Runner, Magnaflow and General Tire. Gripping the trail are a set of officially licensed General Grabber A/T X tires. All of Element RC’s tires are moulded in a soft, high-performance rubber that was selected for all-around grip performance and wear characteristics. The General Grabber A/T X tires are mounted on Urbine 1.55″ beadlock wheels. No more worrying if your RTR tires will come unglued.

View more images here

April 29, 2022

T-Works TLR 22X-4 CVD driveshaft set

Coming from T-Works and made for the TLR 22X-4 are these CVD driveshaft sets with left handed thread for both the front and the rear of the buggy. The dogbones and wheel axles are made of high-quality steel and they feature a black surface coating for wear resistance. The 74mm long driveshafts can be used on the front and the 67mm versions on the rear and the left handed thread comes with a suitable wheel nut.

View the rear set here

April 29, 2022

Mon-Tech Racing M.R.Sport FWD body

Another new FWD body from Mon-Tech Racing with the release of their new M.R.Sport which is inspired by a well-known French brand that runs in the WTCR. Following six months of drawings, prototyping and testing, they have released this body that features an excellent balance between traction and stability, very fast and smooth when cornering. Available in two versions, the standard weight and the lightweight ‘La Leggera’ version.

View more images of the M.R.Sport body here