Red RC

October 7, 2009

Neil King takes Rd8 of BRCA 200mm Nats

The final round of the British 200mm Nationals took place last weekend at Halifax and it was a wet weekend with most of Saturday written off due to the weather. On Sunday it was wet all morning, and in the first round of qualifying newly crowned Champion Kyle Branson TQ’d just in front of Neil King, while in the second round Neil put in a good drive and tyre choice and took TQ with the track still wet. In the third round it started to dry out but around 5 minutes before the quickest heat went out it rained and while Kyle chose the wrong tyres, Neil would go faster with Simon Wood jumping to second with Kyle dropping to third. In the final round of qualifying the track had dried quite a lot and this time Kyle made a good tyre choice, as only half the track was wet he went out on a rubber tyre, and took TQ just in front of Robin Hammet. Young Alex Thurston driving for Kyosho qualified seventh. For the Final it was dry and pole man Branson got off to a good start leading from start to finish, but when he came down from the rostrum he found that he had finished second as on his second fuel stop when exiting the pit lane he had hit a damp patch causing the car to roll over the line, landing back on its wheel, but for some reason it didn’t count the lap. This gave Serpent driver Neil King a very popular win with Kyle Branson in second and Joe Kerry in third. The Championship was already over with Kyle taking the title at the last round, ahead of Johnathan Dobney in second and Chris Slater in third.

Thanks to Kyle Branson for the report.

October 6, 2009

Mobers does double at European Pan Series Rd1

The opening round of the European Pan Series for 1/12th scale took place last weekend in Germany and saw just over 40 drivers competing in both the Pro Stock and Modified classes, with the former being the most popular. Serpent driver Markus Mobers, one of the series organisers, took the top qualifying spot in both classes and would go on to win both classes with European Stock class Champion Marc Fisher taking the runner up spot both times. In the Pro Stock class it was Vesa Yli that took the 3rd spot, while in the modified class it was Daniel Sieber that was 3rd. Interestingly Mobers was testing a new prototype S120 link car in the Modified class, while retaining the T-bar for Pro Stock.

Click here to see the mod podium

October 6, 2009

Alvarado & Báez win Rd9 of Puerto Rico Nats

Round 9 of the Puerto Rico Nationals were held last weekend and after 2 rounds of qualifiers the racing got underway in the afternoon, with 45 minute A-Mains in all categories. In the Sedan class, TQ spot went to Andy Báez, but early problems in the main drop him down out of a podium spot, making it easy for Kyosho team driver Pedro Alvarado to take the win with 5 laps advantage over 2nd position, Mugen Driver Juan Rodríguez, with RC America driver Tory Santiago in 3rd. In the 1/8 class Mugen Team Driver Andy Báez set the pace and took the win in an easy victory over team mate Fernando Méndez in second and new Kyosho driver Jaime Ramos.

Click here to see the 1/8th podium

October 6, 2009

Xceed RC Hybrid-ceramic ball bearings

Xceed have released a range of hybrid-ceramic ball bearings, which feature ceramic balls combined with high grade stainless steel, polished run-ways, protective nylon seals and high grade lubrication. Available in a wide range of sizes (12×18, 12×21, 10×15, 6×10, 6×13 & 5X13mm) their design and materials used help improve rigidity while reducing noise, vibration and operating temperature. The lightweight ceramic balls have a superfine surface finish and high hardness that can help to extend the life of the bearing by up to 5 times that of standard steel bearings.

Source: Xceed RC [xceedrc.com]

October 6, 2009

Jilles Groskamp dominates the Asian Open

The Asian Open took place at the RC Addict raceway in Bangkok, one of the World’s best RC tracks. New Team Orion signing Jilles Groskamp went on to take a great TQ in the 10 minutes qualification, using the latest Team Orion Alpha engine and fuel in the still prototype Shepherd 1/10 on road car. The race also attracted World class drivers like Surikarn C. and Meen V. and so it was sure to be a great battle, and it was for the first 15 minutes in the one hour long final. The final started with pole man Jilles asking for a 10 minutes delay to fix a broken one way bearing and so he would have to start from dead last position. But with a sensational start, it took him 3 minutes to close in to the leading pack of Surikarn and Meen, and for 15 minutes the battle was on, with the lead changing often due to the different fuel stops strategies. After 20 minutes it was clear that it was going to be Jilles’ race and only a technical problem could stop him taking the win. With 3 minutes to go Jilles pushed once more, to set the fastest lap times of the race ending up with an advantage of 7 laps over Meen, who took the runner up spot.

Source: Team Orion [teamorion.com]

October 6, 2009

F.V.S.S. Racing Team V.H.C. chassis for MRX4-X

F.V.S.S. Racing Team have released a new optional V.H.C. (variable hardness chassis-plate) chassis plate for Mugen MRX4-X. Made from 5mm high quality Ergal 7075 T6 aluminium, they have delrin inserts, which are harder and more durable than carbon fibre, to enable you to stiffen or soften up to chassis plate. In the next few months F.V.S.S. will also release new V.H.C. chassis plates for more popular car kits in 1/10 an 1/8 nitro scale.

View more images of the chassis plate here

October 5, 2009

STRC Mini Slash & E-Revo Skid plates

New from ST Racing Concepts are these new option parts for Traxxas Mini Slash and Mini E-Revo. CNC Machined from high-quality aluminium, the one piece front & mid skid plate will increase durability and add great looks to your Traxxas truck. Like the front & mid skid plate, these new rear skid plates are also CNC machined from high-quality aluminium and help increase durability especially when used together. Both are direct bolt on and easy to install and are available in anodized blue, red and silver.

Click here to see the other parts

October 5, 2009

Ryan Cavalieri wins Pro-Line Gas Champs

This past weekend was the 1st Annual Pro-Line Gas Championships held at Thunder Alley in Beaumont, CA. The race format consisted of 2 10-minute qualifiers on Saturday and 1 10-minute qualifier on Sunday, then each driver’s 2 best points would seed them into the Semis. A 15-minute Semi would be ran to fill the A-Main. In the Pro 1/8 buggy class, Ryan Cavalieri won his Semi by 11 seconds as well as the fastest time and would start first on the grid. Team Orion teammate Cody King won his Semi by 9 seconds and would start 2nd for the 30-minute A-Main. At the start of the main, Cavalieri go off to a clean start. King was involved in a first lap crash and would be shuffled back to 6th position. Cavalieri would leave from start to finish, with Cody recovering to take 2nd place, with Travis Amezcua taking 3rd spot.

Click here for a few videos from the event by Upgrade RC