September 8, 2008

Daniel van der Drift wins Dutch GP

Daniel van der Drift wins Dutch GP

The Dutch 1/10th scale 200mm EFRA GP took place last weekend at the MACH track in Heemstede and it saw competitors from a number of different countries battle it out on this challenging track. Following limited running on Thursday and Friday due to rain, Saturday’s qualifying sessions took place under dry conditions and it was Mugen racer Rick V who took top honors during a commanding performance that saw him 8 seconds quicker than 2nd placed racer Jerome Renaux, while Maarten Van Lierop and Daan Jacobs secured the final 2 direct qualifying positions. Sunday’s finals were hit with rain from the very start of the day and this meant a lot of racers didn’t participate, instead deciding to preserve their cars for another day. Following the running of the lower finals that saw a number of drivers move their way up through a number of finals the main final got underway, albeit without Rick V and Daan Jacobs who chose not to start. The start of the 45 minute final saw Renaux initially take the lead, but heavy rain and standing water meant his engine started to die and this saw him drop down the order despite being very quick when his car was going. Another Belgian Michel Tomagra then took over and started to pull out a large gap to the following group but he too hit problems later in the race and would eventually finish in 3rd. Bert Aerts who drove a steady race was rewarded for his efforts with 2nd position but would finish 10 laps behind the eventual winner Daniel van der Drift who overcame some early problems to claim the top step of the podium.

Click more to see the final results… content


September 7, 2008

2008 Picco Cup Asia – Announcement

2008 Picco Cup Asia - Announcement

Hobbypro has announced that it is organizing the 1st Picco Cup Asia in Hong Kong on the ACO racing track on the 1st – 2nd of November. It will be open for both 1/10 & 1/8 classes and they wish to welcome any driver that wishes to attend this event. So far Alberto Picco, New World Champion Daniele Ielasi, Patrick Schaefer and Robert Pietsch will come to HK and attend this event together with more than 120 drivers already confirmed from Hong Kong, Macau, China, Thailand, Malaysia, Indonesia, Japan, Korea, Taiwan & Singapore.

More information can be found here.


September 7, 2008

Backbone transmitter skins

Backbone transmitter skins

Japanese RC graphics company Backbone were in contact to tell us about their range of products that include a wide variety of Transmitter skins. Available in a wide range of colours as well as designs, they can be applied to the main pistol grip transmitters currently on the market like the Sanwa M11, Futaba 3PK & 3M as well as the KO EX-10 Helios & EX-1 UR.

Click more to see some other designs… content


September 7, 2008

Team Cobra Racing Tires & Tools

Team Cobra Racing Tires & Tools

New from Team Cobra Racing is this Python buggy tire that will be available at the end of October. The Python has been designed to cater for the racer that requires a universal tyre with a strong low profile side wall and minimum flex and it claims to work on any type of surface in any weather condition. Also new are sets of weighted 6061 T6 aluminum clutch shoes for use in 1/8th buggy clutches. The same company have also released new tools in the form of a new spring steel glow plug spanner and a 6 piece tool kit that comes in a handy pouch and which includes 4 hex drivers and a phillips and flat head.

Click more to see the other products… content


September 7, 2008

ABEC35 Xray XB808 clutch bearings

ABEC35 Xray XB808 clutch bearings

ABEC35 have announced the release of these new 5 x 12 x 4mm blue rubber shield ball bearings for the Xray XB808 clutch bell. Great price without compromise in performance the rubber shields also offer better protection from dirt than stock metal shields. ABEC35 also carry 13 x 19 x 4mm and 8 x 14 x 4mm for the same buggy.

Source: ABEC35 [abec35.com]


September 6, 2008

Danish Off-Road Nationals Rd6

Danish Off-Road Nationals Rd6

We received a report from round 6 of the Danish DRCMU Off-Road championship which was held in Ejstrupholm at the Midtjysk RC Arena. It was the second time this season that the club is hosted a championship event and again it was nice sunny weather on the Saturday. In Stock class it was Championship leader Jesper Rasmussen back in the fast lane and pushing his Kyosho very hard in the first round of qualifying in the damp but fast-drying conditions. He was the only racer able to make 13 lap and qualified ahead of Martin Kristensen in 2nd with local boy Sebastian Sørensen in 3rd.

Continue reading… content


September 6, 2008

Scud 09R 1/12th GP Touring car

Scud 09R 1/12th GP Touring car

Due to be released in October, the 1/12th scale Scud 09R is a scaled down 1/10th scale gas touring car. Sporting a .09 engine, similar to that seen in the Spada, the car is 4wd with drive coming from 3 belts, and it has fully independent suspension as well as a 2 speed gearbox and other features found on a 1/10th scale 200mm chassis. Having a total width of 160mm, it will come ready to accept a suitable touring car body shell.

Click more for another photo… content


September 6, 2008

AKA Grid Iron & Cross Brace tires

AKA Grid Iron & Cross Brace tires

On the heels of its wildly successful launch of the City Block and I-Beam off-road racing tires, AKA is releasing two more tread patterns, the Grid Iron and the Cross Brace, just in time for the upcoming 1/8 IFMAR World Championship. These two new tread patterns begin shipping to better hobby shops around the world in late September. Like all AKA tires, these are available in all three compounds used by the factory drivers. That means there’s no ‘secret’ compounds that are only available to team drivers, AKA sells the exact same products used by their team drivers.

Click here for further details… content