Red RC

August 27, 2008

Danish Off-Road Nationals Rd5

We received a report from the 5th round of the Danish Off-Road Championship, which was held recently in Gjøl very close to Aalborg. The track was brand new and the club just finished their work on the track a few day before the race. In Stock class it was Martin Kristensen in the fast lane and Jesper Rasmussen in second place with Eli Lundgaard in third position, the compact and technical track suited Martin and he was able to continue his pace into the finals and won two out of three ahead of Jesper Rasmussen and Sebastian Sørensen.

Continue reading… content

August 27, 2008

Stotfold Nationals report by oOple

Our friends over at oOple have a report from the final round of the 2008 BRCA 10th off road National Series which drew to a close at the all astro Stotfold track. The 2WD championship was already decided in favour of Ellis Stafford’s X-Factory X6, the 4WD title however had come down to the last meeting with only three possible winners, Lee Martin, Ellis Stafford and Chris Doughty. In 2wd Ellis Stafford qualified second behind Neil Cragg but it was Ellis that took the win to go with his 2WD championship title. Lee Martin in the 4WD class had won the series by round three of qualifying, with neither of his title challengers able to TQ the meeting for the extra point it meant they couldn’t catch him. Lining up second behind Darren Bloomfield, Lee took the first two legs of the A final to seal another National win.

Read the full report here, including lots of great photos and interviews.

Source: oOple [oople.com]

August 27, 2008

Tim Wood wins UK 1/8th Nats Rd7

Last weekend saw round 7 of the BRCA 1/8th scale championships held at the Halifax track and it proved to be very evenly matched racing with no one driver having a clear speed advantage. Qualifying, which saw the first 2 rounds run on a damp track, saw Mugen racer Andy North claim TQ ahead of Serpent trio Tim Wood, Richard Hicklin and Mark Green. The final was again a very close race with no more than 1/2 a lap separating the top 4 places. From the start, Andy North was slow away and struggled with cold tires in the early stages but was soon on the pace, while Chris Heath was again on a charge from 5th on the grid. After a slow start, Chris started to make back time and with him being able to cut out a fuel stop would be in contention at the finish but unfortunately for him he had a gearbox fail with 4 minutes to go while leading the race. This gave the win to Tim Wood just ahead of Mark Green in 2nd with Andy North taking 3rd.

Thanks to Andy North for the report and pictures.

August 27, 2008

Vitaly Romanov wins at Russian Nats

Another brief report from the Russian National Championships that were held in Moscow at the RC2 off road track recently, this time from the buggy class. The 45 minute A-main was won by pole man Vitaly Romanov, driving the Associated RC8, almost half a lap in front of 2nd placed Kyosho racer Nikita Pomogaev, while 3rd spot went to Mikhail Diachenko, also with the RC8.

August 27, 2008

ATS Tyres Trophy 2008

We received a brief report from last weekend’s ATS Tyres Trophy, which was held on the Lamberto Collari Circuit in Cassino. A great success, the event was attended by more than 100 drivers during the two days of the race including the new 1/8th scale European Champion Jernej Vuga as well as newly crowned 1/10th World Champion Daniele Ielasi. In 1/10th scale it was ATS top man Piero Torregiani that took the win from Giorgio De Felici in 2nd, with Alessio Forte taking 3rd, while in 1/8th scale Andrea Cristiani won from Jernej Vuga and Borrelli Ciro in 2nd and 3rd.

Click more to see the 1/8th scale podium… content

August 26, 2008

Associated BB Shocks & Clutch shoes

Associated RC8/T BB Shocks & Clutch shoes

Team Associated have announced the release of some new parts for the RC8 and RC8T. Starting with these big bore shocks, they are available for both the front and rear of the car and come with hard anodized, threaded 16mm aluminum shock bodies. Extra-large shock bladders allow full volume compensation, while together with the heavy-duty 4mm stainless steel shafts the shocks provide increased stability in rough sections as well as providing softer landings on big jumps. Also new are some handy tools which will make your 16mm Big Bore shock adjustments a snap. Finally for both cars are these new clutch shoes made from durable and hard 2024 alloy that claim to extend the life of your clutch. The harder material will last longer between rebuilds and maintenance, which equates to more time on the track.

Click more to see the other products… content

August 26, 2008

Jörn Neumann wins German 2WD Nats

Only two weeks after winning the 4WD Nationals at the Trier track in Germany Team Associated/Team Durango driver Jörn Neumann also secured himself the 2WD title. The championship was held at the challenging track of the MSC Karlsfeld located in the South German Munich area. The meeting that was held over two days suffered a bit from Saturdays rainy weather which caused some delay and affected the qualifying session since the clay track got very muddy which lead to questionable conditions during the last rounds on the first day. But come Sunday all of the 64 racers in both the stock and modified class were rewarded by beautiful sunny weather. Racing started with the remaining of the qualifying rounds and early start of the finals on Sunday noon. In 2WD (13.5T) Stock CS Electronic/Associated driver Christian Stanglmeier took TQ in front of “Old Dude” Eberhard Beck (Associated) and young Sebastian Findeisen (Associated). In 2WD Modified LRP/Associated driver Benni Gröschel secured himself the number one spot some nine seconds in front of Jörn Neumann (Associated) and “Fast Boy” Robert Hart (Associated).

Continue reading… content

August 26, 2008

Much More Mini Motor Master Mount

Much More have released details about this new mini motor mount for use with their Motor Master device. A simple tool, it comes in 3 different anodized colours – black, purple and blue, and is supplied with a suitable shaft for measuring the motors RPM within the Motor Master. Expected it to be released in mid September.

Click here to see more images… content