Ruddog Product’s aluminium high-speed ESC cooling fans combine cool looks and low ESC operating temperatures. With their aluminium housing, they not only look better than the usual plastic fans, they are also stiffer, which ensures long life and adds reliability, a huge potential advantage in hot conditions. The fans are available in sizes of 25 mm and 30 mm to offer an option for most ESCs on the market.
Source: Ruddog [ruddog.eu]
Creation Model have started selling the stickers from their recently released Infinity team setup board individually. Not only can these be used for repairing your Infinity team setup board, but can also can be applied to your current setup board. Supplied in 430x290mm they come in two versions with the Infinity logo in vertical or in horizontal orientation.
View the vertical version here
Bittydesign have introduced their long teased ZL21 1/10 No Prep drag racing body shell. Making reference to the American iconic muscle car when designed the lines of the ZL21 the final body shell features a breathtaking ‘Outlaw’ look designed for going fast. During the design they thought of every possible detail and so this led them to produce a variety of parts that complete the racing and realistic look of the ZL21 and aid in performance. These include the rear wing (extension) to improve and clean the air turbulence generated in the rear, two different exhausts to give a realistic look and finally a front splitter to create a more aggressive appearance, as well as help increase front end stability. The body shell was designed on AE DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash 2wd Drag Car & Traxxas Drag Slash 1/10. Made with high quality and genuine 1mm thick polycarbonate Lexan, the kit includes a complete set of screws, nuts and washers necessary for correct fixing of the additional parts.
View more angles of the ZL21 here
New for the Factory Team brand is the carbon fibre standup motor mount for Team Associated buggies. This 3mm thick motor mount is lightweight and replaces the blue aluminium version. Fits RC10B6.1 series, RC10SC6.1, RC10T6.1, when used with the #91788 gearbox.
Source: Associated [associatedelectrics.com]
New from Awesomatix for the A800 comes this C04M1+7.0 carbon suspension arm which can be used in front and/or rear of the car. It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a ‘7’ engraved on the topside for easy identification.
Source: Awesomatix [facebook.com]
Team Associated have introduced another new design to their DR10 RTR line up with the release of this Pro Reakt Lucas Oil livery. Based on the 9-time ROAR Short Course National Championship platform, the DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. In addition to the features above, the Brushless LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V 2S LiPo Battery with T-plug.
View more images of the new livery here
Yokomo have introduced their new BD10F competition FWD touring car, which utilises the components from their BD10 touring car and realises the optimum weight distribution for FWD drive. The bulkhead and suspension arm are the same as the BD10LC, but it is a pure competition FWD touring car that has been converted to FWD by changing the main chassis and motor mount. The dedicated weights on the front and the position of the motor near the front ensure the traction required when accelerating. They have managed to eliminate the excessive steering response due to the weight increase, by changing the Ackerman ratio with the long bell crank. At the rear, in addition to the Axon shock that has a reputation for smooth operation, a mass damper that is simple but has a high effect of canceling vibration is adopted, and the rear grip is increased to prevent stall when cornering. Of course, there are some optional parts for BD10 that have been released so far that can be shared, and running costs can be reduced, including the sharing of consumable parts.
View more images of the BD10F here
New from Arena are these ‘world spec’ progressive HPS (2.5~3.0) 19.5mm springs. Made by Yokomo, they help to supply more traction on power and reduced roll for more stable acceleration, they are suitable for both the front & rear. Made to work with many 1/10 touring cars such as the MTC-2, IF14-2, T4, BD10, X20 and more.
Source: Arena [rcmarket.com.hk]
