Team Associated is offering a lexan front wing for it RC10B7 to tune the aerodynamics of the 1:10 2WD buggy. Installed using their #92487 upper wing mount, the wing allows racers to tune the airflow around the vehicle for optimal balance and to gain overall stability and reduce turn-in. Alternatively using the lower wing will increase turn-in while no wing will give a default neutral feel.
New from Hobbywing comes the second generation of its 16BL30 ESC intended for use in 1:16 and 1:18 vehicles. The new 16BL30 G2 is is significantly smaller than its predecessor being 8.3% shorter in length, 7.1% narrower, and 16.7% lower in height. This new compact design makes installation easier and allows for cleaner wiring on the chassis. Technically the BEC’s continuous current has been upgraded from 1A to 2A with a peak current of up to 4 amps. The output voltage can be switched between 6V and 7.4V. Easily powering high-torque and high-voltage servos, this provides faster response and more precise control. IP67-rated protection allows it to easily handle harsh environments such as rain, sand, and muddy roads, ensuring reliable performance without environmental limitations.
Source: Hobbywing [hobbywing.com]
1:28 and Mini-Z specialists Reflex Racing has released a new Aluminium Tweak Station called the RX550. Precision machined from 7075 aluminium and high grade stainless steel, this tweak station is precise, light weight and easy to use. The tweak station features 3 adjustable feet as well as a bubble level to set the station level in North-South and East-West. The Station pivoting bar is also ball raced for minimum friction and maximum precision. The station is compatible with any wheelbase from 98mm all the way to 116mm so most 1:28 cars should be able to be adjusted.
The opening round of the BRCA British 1:8 Circuit National Championship took place last weekend with former Champion Tim Wood taking a debut victory for the new Shepherd Velox V8.3. Racing at the Brooklands track, which hosts 2 of the championships 7 rounds in 2025, Wood secured the TQ ahead of the Mugen Seiki of reigning Champion Alex Thurston with Andrew Hastings’ Shepherd completing the Top 3. In the 30-minute final it was Thurston, winner of 5 races in a row last season, who took the early lead until a stripped 2nd gear ended his challenge. Setting the fastest lap race Wood would go onto to secure a healthy win over team-mate Hastings with Thurston completing the podium. Round 2 of the championship will take racer to the Cotswold track on May 3-4th.
Image: Shepherd Micro Racing [Facebook]
Aftermarket parts and accessory manufacturer T-Works has added two BB CVD Drive Shaft Set options for the Yokomo MS1.0 1:10 Electric Touring Car. The 45.5mm Ball Bearing (BB) equipped CVD driveshafts improve transmission efficiency and make for a smoother drive system. Sold as a pair of CVDs, in addition to the standard set they offer a lightweight version which uses aluminium axles.
Yokomo through its Racing Performer electrics product line introduces the 740 DC Charger. This DC charger/discharger is compatible with a wide range of batteries, including Li-Po/Li-Fe batteries, and is ideal for racing use. It has two charging ports, each capable of 400W output. In addition, an ultra-fast charge of 800W is possible using the parallel charge function. The colour LCD panel is easy to read and operate, and the easy-to-understand interface makes it simple to use.
Having clinched the 2024 Asian Buggy Championships title at the season finale in Indonesia last October after a consistent campaign, Sworkz’s Christian Wolhuter will get his title defence underway at the upcoming Philippine Masters. Having opted to miss the season opener in New Zealand last month, the Australian returns to Manila for Asia’s biggest annual 1:8 Offroad race having finished fifth last year behind team-mate Joern Nuemann at the Circulo Verde Race Track. Both the Champion of Nitro and eBuggy in the Cayote backed championship, the 18-year-old will be looking to build on his breakthrough international season and looking to his first away race of 2025 said, “Feeling ready for the Philippine Masters 2025 event, with a lot of travel last year and a good start to this year, I have high hopes. With high competition, it is going to be a long, tough fight throughout qualifying and finals. Edward Sio has always put on a killer event through accommodation and, most importantly, the track. Good luck to everyone participating.”
Source: Asian Buggy Championships [Facebook]
New from Germany’s Revolution Design are these Aluminium and Steel Bulkheads for the Xray XB2’25 1:10 2WD Buggy. Weighing just 12-grams, the Aluminium 0° Bulkhead 0° is a premium upgrade part precision-machined from high-strength 7075-T6 aluminium and replaces the stock plastic bulkhead to enhance durability and handling performance. The black anodised finish with silver machined edges adds a refined racing look. The 45-gram Steel version is the ideal tuning part for drivers aiming to add front-end weight to their Team Xray XB2 2025. Made from high-quality steel, this bulkhead offers extreme durability and a significantly increased weight for improving balance and front traction on low-grip surfaces.
