August 31, 2024
New from Team Associated’s optional parts brand Factory Team Carbon Fibre Shock Towers and Aluminium Shock Standoffs for the RC8B4.1 1:8 Buggy. The 5mm Front and 4mm rear shock tower together with hard-anodised aluminium shock standoffs lower the centre of gravity. The updated design towers require shorter standoffs #81657 due to the solid cross-section around the shock mount screws. Overall, this is the most durable way to execute this lightweight design. The Front tower fits the RC8B4.1 26.5mm kit front shocks and with the Rear tower fits 36.5mm kit rear shocks. The new hard-anodised alu shock standoffs come in two…
August 30, 2024
…new Top Plate features a redesigned shape to avoid rod interference when using the optional servo weight plate. Having entered the 1:10 2WD Buggy market for the very first time earlier this year with the release of the MSB1, the Japanese manufacturer has also updated the gear set for the ball diff. By reducing the diameter of the gear part of the B2301D, the rotation of the gearbox has become smoother. The gear differential has also been redesigned to improve oil leakage from the B2302A/B. For identification purposes, the new gears will be grey in colour. Source: Mugen Seiki [mugenseiki.com]…
August 30, 2024
ARC has released this Mid-lipo Upgrade Set for its R8.4ES 1:8 Electric Onroad Chassis. The upgrade set release is in response to the new spec middle size Lipo battery became available in the market and mid-lipo having more capacity than shorty-lipo. The set includes a new upper deck, new main and front shaft to extend the side belt 8mm outside and with the upgrade set the R8.4ES can drive both short and middle-size lipo. The R8.4ES with mid-lipo will increase about 60g weight while increasing run time by about 1 minute. Source: ARC [arc-rc.com.tw]…
August 29, 2024
SPower, the engine brand of Sworkz, has released new SPower-e Electric Switch Pro II multi-functional electric switch. The one-touch button with an easy to read screen shows the current battery voltage so that you will not any battery issues before a race. And the back button enables you to change to different battery types – Li-Po, Li-ion, or Ni-MH. The Electric Switch Pro II electronic switch is designed and produced by Japan’s famous rc company KO Propo. Source: Sworkz [sworkz.com]…
August 29, 2024
Reedy has released an all-new range of Sonic 900 and 900XL Competition motors for 1:8 eBuggy and eTruggy. Several months of development by engineering staff and factory team drivers has resulted in motors that deliver performance that far exceeds what is required at the highest level of competition. The Sonic 900, available in both 1900kV and 2100kV versions, is intended for use in 1:8 eBuggy classes. Each version comes with a unique rotor which is interchangeable between both and sold separately to fine tune power output and delivery for specific track conditions and driver preference. The Sonic 900XL features a…
August 28, 2024
…equal-length front and rear belts for consistent handling, and a redesigned motor mount to accommodate brush motors. The new short shocks and lowered shock towers reduce the centre of gravity, enhancing performance and expanding setup options with compatible springs from competition touring cars. SPECIFICATION Front and rear short shocks and shock towers Front and rear equal length belts Center motor layout Front and rear gear differentials Front and rear universal shafts Turnbuckle upper arms and tie rods Aluminium motor mount (compatible with both brushed and brushless motors) Battery holder that can accommodate a battery pack Full bearings Source: Yokomo [teamyokomo.com]…
August 28, 2024
Another new release from specialist onroad accessories and optional parts producer PNP-RC is this Radio Box 1.5mm Spacer for the Mugen Seiki MRX6X 1:8 Onroad chassis. This carbon piece is mounted in between the carbon radio tray and the plastic radio box lowering the complete radio box 1.5mm resulting in a lowered centre of gravity. The spacer is currently the only one on the market purposely designed to fit perfectly for lowering the radio box on the MRX6X. Source: PNP RC [pnp-rc.com]…
August 28, 2024
New from JTP, the brand of former World Champion & professional racer Jared Tebo, are these Flex Towers for the Tekno EB/NB48 2.1 and 2.2 buggies. Made in the USA by 1Army, they are the same shock and camber link geometry as the Tekno flex towers, with the added “original” lower short rear camber link location. Raw aluminium for a really clean look that stays looking new, they are 6-grams lighter in total than the Tekno towers, 3-grams front and 3-grams rear. They are finished with etched JTP logos on front and rear tower. Source: JTP [shopjtp.com]…
