Red RC

August 20, 2021

O.S. Speed B2104 buggy engine

OS have introduced the new OS Speed B2104, a long-stroke .21 offroad engine, featuring quicker response in the low range and more torque in middle range, along with consistent idling. The new piston/liner is conventional 3-port type enabling more torque over the power range, while the new crankshaft has DLC coating and two tungsten counterweights embedded in the crankshaft contributing to consistent idling and quick return to idle. The boost port and the exhaust port of the crankcase are redesigned for optimum air flow, while the rest of the engine remains familiar with the use of 22E type carburettor and conventional round-shape cooling head with standard height. Also available as part of a combo with the TB03 (T-2100, EFRA 2155) silencer with 80mm manifold.

View more images of the B2104 here

August 19, 2021

Pro-Line Axis ST body for Mini-T 2.0

Now you can have a Pro-Line Axis ST body for your Mini-T 2.0 to match your 1:10 version. The all-new Axis series of race bodies is a clean-sheet design from Pro-Line bringing a fresh new look to the class. Designed with the latest in CAD technology, the Axis features a super low-slung design with sharp lines throughout giving it an unmistakable look on the track and fits the Mini-T 2.0 chassis perfectly. The Axis is a cab-forward design that provides an enhanced steering response to get you around the track faster than ever. The Axis is made from light-weight polycarbonate material that will give you an edge over the competition. The body comes clear giving you the option to paint the body however you desire. Paint-then-peel overspray film, window masks, and Pro-Line decals are included with the body.

View more images of the Axis ST here

August 19, 2021

Pro-Line Front Runner drag tire & Showtime wheel

Pro-Line is ready to change the No Prep Drag game once again with a true next-generation front tire designed for maximum performance, the Front Runner Tire. Named after the front tires found in full-size drag racing, it was built from the ground up to be as lightweight and narrow as possible while still maintaining a scale appearance. The outside of the tire features a standard 2.2″ bead, so it will look like all the regular front tires from the outside, but the inside of the tire has a 2.7″ flat bead for reduced rubber weight. Combine it with Pro-Line’s an all-new Showtime Front Runner 2.2″/2.7″ black drag front wheel featuring a scale spoke pattern that mimics full-size drag wheels. Designed to be super lightweight and narrow for maximum performance, they are a strong and lightweight 12mm hex wheel making them the ideal choice for performance drag racing.

View the new tires & wheel here

August 19, 2021

Pro-Line 2021 Chevy Silverado 2500 HD body

Pro-Line have introduced the new 2021 Chevy Silverado 2500 HD made to fit the E-REVO 2.0 and MAXX when using extended body mounts like Pro-Line’s 6307-00 or 6370-00. Proudly Made in the USA, this body is made from durable polycarbonate material that allows you to put your custom paint job onto your body. Paint-then-peel overspray film, window masks and scale Pro-Line decals are included with the body to take it to the next level.

View more images of the Silverado 2500HD here

August 19, 2021

Deadfly MTC2 weighted fully adjustable LiPo holder

More new items from Deadfly for the Mugen MTC2 with a the introduction of their LCG weighted fully adjustable LiPo holder set. Especially designed for the use of ULCG batteries it incorporates 2mm of forth and back adjustment in the lower spacer to ensure a perfect fit. The set maintains the factory’s left to right moment within the L-shaped hooks for the perfect weight balance and the 15mm posts fit perfectly into the recess within L-shaped hooks, with a low profile M3 nut in the other ensuring the whole system can be tightened and not move. Supplied with the carbon fibre DeadFly twist clamp. The brass hooks are also available separately.

View more images of the set here

August 19, 2021

Mugen Seiki MTC2 FWD 1/10 touring car

Following the successful launch of the MTC2 electric touring car, Mugen Seiki have announced the MTC2 FWD. The kit is based off the MTC2 touring car and uses the same high-quality materials and parts. Ronald Völker was instrumental in the testing and development of the MTC2 FWD. The car has a mid-front motor layout and uses a lot of parts from the MTC2 electric touring car. The focus when designing and testing the MTC2 FWD was to get the best weight distribution along with reaching the weight limits for this class. Another focus was to maximise the number of interchangeable parts from the MTC2 to the MTC2 FWD which is key for racers, hobby shops, and dealers. The main chassis features multiple flex options as well as spots to mount additional weight while the one piece upper deck also offers multiple flex options as well as the possibility to use huge size pinions. The car comes standard with a 42gram front weight sitting under the front differential as well as a 85gram bumper weight with the possibility to add three additional 10gram weights. The rear of the car sports a body mount with horizontal body posts as well as vertical ones while the front comes with included body stoppers with additional spacers for use with FWD type bodyshells.

View more images of the MTC2 FWD here

August 18, 2021

RDRP B6.3, T6.2 & SC6.2 slipper eliminator

RDRP’s slipper eliminator set helps you to shed some weight on your B6.3, T6.2 & SC6.2 where it counts most. The spur gear hub is made from black anodised aluminium with silver detailing to match the popular style of many aftermarket parts. As it is fully compatible with the kit top shaft and a variety of spur gears including RDRP’s lightweight ultra spur gear series and Team Associated’s, converting your 6.x series Team Associated vehicle to direct drive has never been so easy. For your convenience, the set includes spur gear mounting hardware, slipper bolt and nut.

View the mounted part here

August 18, 2021

Deadfly MTC2 balance weights

From Deadfly come more new brass products for the Mugen MTC2 consisting of three different balance weights. Designed and machined in house out of high quality natural 3mm brass they have been finished with the very distinctive DeadFly logo and wing pattern. The different versions include front, forward and rear weights providing you with an array of balance options.

View the other new balance weights here