Avid RC have announced the release of their new droop gauge blocks, available individually or together as a kit with their circular gauge. Avid droop gauge blocks are a traditional staple for checking the droop on your touring cars. These 10mm blocks are placed under your chassis so you can easily check your arm level height with callipers or with their handy circular gauge.
Source: Avid [avidrc.com]
New for the Team Associated B6 series of cars Willspeed introduces their TakeOne HRC machined aluminium front 25°/30° bulkhead. This front bulkhead raises the hinge pin 1mm closer to the chassis, raising the roll centre. The result is more steering response and overall steering throughout the corner and is a great option for all track and surface conditions. Lightweight at only 8.5g, this keeps the steering input feel immediate and agile. Supplied with new hinge pin brace to suit geometry change they are available now in clear, blue or black anodised finishes.
Source: Willspeed [willspeed.co.uk]
Another strong 115 entries event at the Beachline Raceway for the 4th round of the FSEARA Series. It has been a tradition every January that there is a big FL Warm up race for the world-famous Snowbird National and this year was no exception, Robbie Michael continued this tradition to host it at Beachline Raceway. Using the track & space to duplicate the layout of the Snowbirds, Robbie did a great job as he prepared and opened the track early on Friday to give racers the chance to lay down some traction for the race day. There are many drivers from all around FL to attend these 3 days to get this final chance in order to prepare for the Snowbird Nationals.
Continue reading the report here
Arrowmax have welcomed Elias Johannson to their team. A Swedish offroad national champion and multiple EOS A-finalist, Johannson will be using their full range of tools and accessories from Arrowmax for all his rides going forward.
Source: Arrowmax [arrowmax-rc.com]
Reedy’s all-new 2513MG digital metal gear servo is a quality upgrade for RTR vehicles, with speed and torque ratings that improve driving precision by giving drivers a better ‘feel’ for their vehicle. The all-metal gear set is designed for strength and durability, while a CNC-machined centre case reduces operating temperatures for fade-free operation. Dual ball bearings, a high-impact plastic top case, and water-resistant construction further improve reliability and value.
Source: Reedy [associatedelectrics.com]
Get the most out of your No Prep Drag Cars with Team Associated’s new FT Lockout slipper clutch. It dynamically and independently controls the amount of slip created during launch and when down the track at speed. Lockout combinations are unlimited, depending on track conditions, amount of power, chassis setup, and throttle application.
View the complete lockout slipper clutch set here
New from Xray for the X4 is this optional aluminium steering block CNC-machined from premium lightweight T6 aluminium. Ultra-strong construction, it provides very long life and durability in even the most extreme racing conditions. A direct replacement for the standard composite hubs, using the steering blocks in an aluminium material reduces flex, improves consistency and will free up the car, mainly for high grip conditions and especially in spec racing classes. The X4 hub features new suspension geometry for improved steering and traction and contain an updated drive axle that moves the driveshaft pivot point deeper into the hub, in line with the hub’s rotational axis between the upper and lower arm. This alignment improves driveline efficiency and handling. The aluminium front steering plates and rear ARS plates are easily mounted depending on the hub’s location and the design of the hub is universal with the same part used at all four corners with corresponding extensions.
Source: Xray [teamxray.com]
With the carpet season still ongoing, Fenix Racing is proud to present this chassis for the Mistral 3.3. Made from 2mm 7075 aluminium with medium wheelbase dimensions, it means that it could cover 260-265-270mm range to suit the various conditions and track design. Perfectly coupled with their other new release, a 2mm 7075 aluminium motor pod.
