Red RC

August 13, 2021

Hasi Tuned R21 Swiss Spec .21 nitro engine

Hasi Tuned have introduced their new R21 Swiss Spec .21 nitro engine intended for the use with 1/8th on-road cars. Based on the 7 port O.S. R21 engine, the 2021 version is the result of two years of development with their team. The Swiss Spec features new timing and new improvements on the cylinder, these upgrades making a great difference compared to the previous engine. The R21 Swiss Spec .21 on-road nitro engine is only available pre broken-in and either separately or as combos with a standard or hard coated pipe.

View more images of the engine here

August 13, 2021

Infinity IF15 20g chassis weight

From Creation Model is this 20g chassis weight to adjust the front/rear balance of the Infinity IF15 and IF15W. The 20g weight can be used together with the 9.5g, 14g, and 28g weights already available on the market for more refined tuning of your setup.

Source: Creation Model [creationmodel.net]

August 13, 2021

MiBorg M-chassis RCV driveshafts

Coming from MiBorg and made for the Tamiya M-chassis are the new RCV driveshafts. Utilising the design of full-scale cars the driveshafts use ceramic balls instead of cross pins to drive the wheel axle, which results in less vibration and more compacity compared with a double joint. This leads to a more predictable driving and in addition the wheel axles allow the use of pin-less wheel hex adapters for a better wheel concentricity. These driveshafts can be use on the rear, they bring more stability and a better control of the trajectories.

Source: MiBorg [miborg-rc.com]

August 12, 2021

T-Works AE, TLR & Xray carbon fibre wing buttons

T-Works have introduced two new carbon fibre wing buttons, a narrow version (20-26mm) for the Team Associated & TLR buggies and a wider version (20-30mm) which also fits the Xray. The 1-piece wing button is machined from high-quality carbon fibre and makes for easier wing mounting, improved looks and better wing support, especially when running lightweight polycarbonate wings. The buttons come has elongated holes to allow mounting on a multitude of mounts and comes supplied with the mounting hardware.

View the wide wing button here

August 12, 2021

Power HD LW-15MG & LW-30MG waterproof HV servos

From Power HD is their newly designed waterproof HV servos, the LW-15MG and LW-30MG. Two servo models with different parameters you can choose between the 15kg/cm or 30kg/cm versions. With stable performance, high torque, stronger locking force, less gear slop, double ball bearings and a 25T metal spline, they are ideal for a multitude of uses from RC crawler to boat, aircraft, etc.

View the complete specs here

August 12, 2021

Maclan M32e Pro 200 ESC & MR8.4 series motor

Maclan Racing have introduced their new M32e Pro 200 Competition 1/8th ESC and all-new MR8.4 series motor for 1/8th competition applications. The M32e Pro 200 is purpose-built for the 1/8th scale eBuggy and eTruggy applications with upgraded internal components ensuring the operating temperature is lower than its predecessor. With silicon coating on the circuit boards, the M32e also offers better durability for the 1/8th scale competition environment. It utilises a full aluminium case that ensures maximum thermal dissipation and extreme durability and the 30mm HV turbo ESC fan provides that extra insurance to cool down the ESC in extreme ambient conditions. The super-switch-mode BEC is designed to handle true HV for all types of servos from 6V to 8.4V.

View more images & details here

August 11, 2021

Smart Engine Break In Box

New from Smart Workshop, the Smart Engine Break In Box is the first propeller break-in system with all the necessary break in tools built into a compact system. A compact and professional break in tool for your engine, it includes a built-in starter, built-in display, RPM sensor, temperature controller, heater, accurate adjustable throttle linkage, built-in fuel pump, large fuel tank (500cc) and it is all operated by DC 12-14.8V.

View more details & images here

August 11, 2021

Penguin Cat L1 Evo Dart body

New from Penguin Custom Bodyshells is this Dart body for the Cat L1 Evo. The L1 Evo Dart body is designed to compliment the Cougar LD2 kit shell. It keeps the car flat through corners and is designed for high grip, with aerodynamic flicks down the side directing airflow over the wing to the rear. Supplied clear and available in both standard 0.75mm and lightweight 0.5mm version, it includes window masks and Penguin decals.

View another angle here