Red RC

March 10, 2008

Much More Stone Finisher Tool

Much More have released this stone finisher tool set for preparing stone cutters that cut lay down or stand up brushes surface smoother than a metal blade cutter. The set is sold separately to the stone brush cutter but is supplied with the blue anodised brush setter and stone block. New stone cutters can be cut to the users desired diameter with the stone block and when finished is turned upside down and mounted to the motor shaft as normal. The supplied brush setter cuts the brushes to 0.0mm or zero timing.

Source: Much More [much-more.co.kr]

March 10, 2008

Truhe & Maifield win the Silver State

Last weekend saw the Silver Nitro Challenge run in Las Vegas and it was Adam Drake that secured the TQ spot in the buggy class with his Losi 8ight while in the truggy class it was Jared Tebo, racing the O’Donnell prototype, that took the top spot. For the mains, they would be split into 2 x 25 minute races with the combined results determining the overall winners. In the buggy class it was Losi racer Mike Truhe that won both finals to claim the overall win ahead of Kyosho racer Cody King in 2nd and Jared Tebo in 3rd with his O’Donnell Z01-B R. Pole man Drake had problems at the start of the first final with his radio and despite a race delay, was unable to make the start. In the truggy class, Jared Tebo won the first final from pole, but in the 2nd main needing only to place in front of Cavalieri, he rolled on the penultimate lap dropping to 3rd meaning it was Ryan Maifield driving the Kyosho ST-RR that took the overall win with Tebo ending up 2nd and Maifield 3rd.

Click more to see the truggy podium… content

March 9, 2008

ETS Denmark – Jilles Groskamp confirmed

ETS Denmark - Jilles Groskamp confirmed

The organisers of next weekends second round of the Much More backed European Touring Series are delighted to confirm that Tamiya factory driver Jilles Groskamp will be present at the event. Taking place in Vejle, Denmark, the race will also be attended by fellow Tamiya team drivers Marc Rheinard and Viktor Wilck as well as Associated team driver Joel Myrberg and lots of other top quality racers. Entries will remain open until the first day of the race, which will be Saturday the 15th, and for those already entered or wanting to enter, there is a new reduced entry price and updated timetable. All drivers will get 5 rounds of practice on the Saturday as well as 4 rounds of qualifying, while on Sunday there will be 1 more round of qualifying and triple mains for all racers.

Do you want to race against some of the World’s top touring car racers, while being commentated on by the legendary Scotty Ernst, in a fun and friendly, yet professional racing atmosphere then be sure to get your entry in for round 2 of the ETS by going here.

March 9, 2008

Gaggiola wins North Interregional Rd1

Gaggiola wins North Interregional Champs Rd1

Xray have a brief report on their site from the first North Interregional Championship race that was held in Montecchio last weekend. Perfect spring weather conditions greeted the over 50 drivers in the 1:10 class and after 3 rounds of qualifying it was Paolo Gaggiola that took TQ with his Max-powered NT1. Following the semi finals, in wich Luca Colombo and Guido Barbera won to take their place in the main final, the NT1 racers proceeded to dominate the race with Gaggiola taking the win from Colombo and Barbera in 2nd and 3rd.

Source: Xray [teamxray.com]

March 8, 2008

Phuah & Seet win iRacingWerkz NC Rd1

Xray have a report on their site from the 1st round of the iRacingWerkz Nitro Challenge held recently at Singapore’s Turf City track. The race was open to both buggy and truggy and in the buggy class it was HongNor racer Wenyi that took TQ with the Xray pairing of Sam Cheng and Glenn Phuah in 2nd and 3rd, while in the truggy class it was Glenn Phuah that made TQ with the only 13 lap qualifier of the whole event. In the truggy main final, Glenn managed to pull out a comfortable lead until he clipped a metal spike that damaged the front arm, ending the race for him and handing the win to Kyosho driver Ben Seet. In the buggy final Glenn was once again quick, having a good battle with Wenyi and Sam Cheng but could eventually pull out a lead, taking the win despite a damaged rear wing, with Seet finishing in 2nd and another Xray driver JY Mok in 3rd.

Source: Xray [teamxray.com]

March 8, 2008

IDM Tuned tires and clutch system

As some of you may have noticed, we have a new advertiser on the site in the form of IDM, the company run by top Italian racing driver Daniele Ielasi. Best known for his range of IDM Tuned Picco made engines, the former European Champion is also extending the IDM line to carry other products as well. IDM are getting into the tire business with the release of a complete range of foam 1/8th scale and 1/10th scale tires made by ATS and we are told that there will be changes made to the wheels you see in the picture above before launch. Other items include the IDM branded and Capricorn made clutch system for 1/8th scale, that features a vented clutch bell and 3 different clutch shoes for varying effects.

Click more to see the clutch system… content

March 7, 2008

Sotiropoulos wins Greek 1/8th Nats Rd1

Serpent are reporting on the first round of the Greek National Championship that got underway at the FRT track last weekend and which saw current Champion John Sotiropoulos dominate the event. With a busy few days prior to the event to build the new 08 kits, Saturday’s practice showed that Sotiropoulos had not lost any of his pace over the off season as he set the pace with his new Max powered Serpent. A pace that he carried through to qualifying on Sunday as he TQ’d the event. Starting the 30 minute final from pole position, Sotiropoulos was pushed hard at the start but once the race had settled down the Serpent driver began to pull away, eventually crossing the line some 3 laps clear of Kyosho racer Giannis Arkoumanis in 2nd and his team mate Totomis Evaggelos in 3rd.

Source: Serpent [serpent.com]

March 7, 2008

Medial Pro announce their Return

Following the announcement last October that French tyre maker Medial Pro was putting itself up for sale comes today’s release that they have been sold to Belgium based company Medial Pro BVBA. All inventory, rubber injection machinery and tyre moulds will be moved this month to the brand new production facility in Belgium where the production will be restarted at the end of April. This new company will be doing all it possibly can to supply the market, and their worldwide distributor network, with a new stock of tyres as soon as possible. Nothing will be changing on the rubber compounds but Medial Pro have said that the existing range of competition tyres will be extended before the end of this year with 5 new types of 1/8 off-road and Truggy tyres, designed by Claude Lachat.