Red RC

August 20, 2024

LRP 2S Charging Lead – RX/TX – 60cm – 4mm, XH to XH

German electronics brand LRP has extended its charge wire range with the addition of the 2S Charging Lead – RX/TX – 60cm – 4mm, XH to XH. This charging lead allows convenient charging of your receiver battery without disconnecting the battery from the receiver, which sometimes is difficult to do, due to the installation and sealing. With this convenient charging lead, the battery can be charged solely via the easily accessible balancing connection. No other battery connection is required. For protection and reliable operation, the new charging leads come with a protection mesh and shrink tube on both sides with our logo imprinted.

Source: LRP [lrp.cc]

August 20, 2024

Avid Ringer Shock Collar Sets

Avid Racing Concepts has released 12mm or 13mm Shock Collar Kits to allow you to run either 12mm or 13mm springs on AE 13mm, TLR G3/3.5, and Schumacher LD3/L1R shock bodies. The kit includes 4 threaded shock collars that feature offset laser-etched Avid logos for ease of matching spring tension left and right in 1/4 turn increments with a silver ringer highlight machining. These collars will ensure proper spring fitment without the use of 3d printed adapters and feature standard internal oring design for holding the collar in position.

Source: Avid [avidrc.com]

August 20, 2024

Red RC to attend MonTech New York Grand Prix

Following the recent announcement on the 2024 edition of the MonTech New York Grand Prix, Red RC is super excited to announce that we will be making the trip to the host track 360v2 RC in New Rochelle, New York, to cover the October 10-13th event. Slotting nicely into our 3-stop World Championships coverage schedule, the MonTech New York Grand Prix will be the first major US based race we will have covered since the 22nd, and unfortunately last, running of the Touring Car Reedy Race of Champions back in 2019. Reaching its 6th edition in 2024, the NYGP, which is supported by Italian bodyshell producer Montech, has established itself as a high profile race on the annual US onroad racing calendar and has drawn many top international entries stateside. In addition to Red RC reporting on how the race unfolds, our friends at Mod Live Media will be live streaming all the action from the indoor race.

Source: Fordham 360 Hobbies & Raceway [Facebook]

August 20, 2024

Yokomo RS1.0 Short Shock Conversion Kit

Yokomo has released a new Short Shock Conversion Kit to further enhance the performance of their RookieSpeed RS1.0 entry level 1:10 Electric Touring Car to racing specifications. This set of carbon shock towers and aluminium short shocks delivers a precise ride with minimal body roll. The shock length has been shortened by more than 7mm to achieve an impressively low centre of gravity. The hard-coated aluminium cylinders operate smoothly and provide a supple suspension that grips the road surface effectively. The latest competition springs can also be used for the shock springs, allowing for a much wider range of settings. The front and rear shock towers, made of carbon and specially designed for short shocks, reduce weight and increase rigidity for sharper response.

View Short Shock Conversion Kit fitted here

August 19, 2024

UpGrade RC Multi-tool

AMain Hobbies brand UpGrade RC has released a new multi-tool featuring a shock shaft pliers, tyre punch, ball link pliers, and wire crimp. The Multi-Tool is one of the most versatile all-in-one tools on the RC market. Its precision design securely grips shock shafts allowing for easy assembly and disassembly of shocks without damaging the shock shafts. The ball link pliers are perfect for installing and removing ball links without causing damage, while the tire punch feature creates the perfect sized holes in tires. The wire crimp function enables quick and efficient crimping of connectors to ensure secure and reliable electrical connections.

Source: AMain [amain.com]

August 19, 2024

MiniPro Motor Dyno V2

Almost 8-years on from the launch of their first Motor Dyno, MiniPro has released a V2 version of the R/C Car Inertia Motor Dynamometer. The new V2 was designed for the testing all types of R/C motors, brushed or brushless. The load on the motor is produced by the inertia flywheel unit, a high quality 6061 aluminium frame cover around the flywheel to protect from high rpm speeds, and an embedded dyno board to accurately measure the acceleration of the DUT (device under test). The dyno uses a pinion/gear combination to accelerate the inertial mass (flywheel). Its embedded dyno board takes the flywheel’s inertia (resistance of an object to a change in its state of motion), and measures the rate it takes to accelerate it and calculates the output power and torque of the DUT. The dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the motor’s power characteristics. Precise, otherwise known as “Repeatability” is what you want in a dyno, that means test the same electric motor time after time and get the same results. The V2 dyno is capable of repeatable test results using the built-in Throttle controller sensor (license required).

View features & more images here

August 19, 2024

Hall adds 2WD to 2024 BRCA National titles

Having successfully defended his BRCA British 4WD Buggy National Championship title with his fourth consecutive race win at Round 4 at the end of June, Team Associated’s Tommy Hall has added the 2WD title to his 2024 tally at the championship’s 6th & final round over the weekend. Racing at Boughton Raceway, Hall and defending 27 time British National Championship Neil Cragg came into the final round equal on points following Cragg’s win at the penultimate round. In qualifying it was Hall who took the TQ over his main rival with Schumacher’s pairing of Ben Smith and Lee Martin lining up P3 & 4. Taking A1 & 2 ahead of Smith, Hall claimed his third win of the season allowing him to complete the title double, something Cragg was the last driver to pull off in 2019. Overall Smith would end the season as the 2WD Championship runner-up from Cragg, Martin and Holdsworth brothers Josh and Luke. In Sunday’s 4WD action Cragg would claim his first win of the season ahead of 13-year-old Daniel Pole to finish runner-up to Hall in the final standings.

Image: Schumacher [Facebook]

August 19, 2024

Hamon completes clean sweep at QLD Champs

Serpent’s Jeff Hamon completed a clean sweep of the Modified Touring Car class at the RC Maker RCRA EP Queensland State Titles over the winning, adding the title to the NSW State Titles he won earlier in the year. With the Bayside Radio Control Car Club hosted event attracting just shy of 100 entries, Hamon would secure the overall TQ after topping 3 of the 5 qualifiers. Making the trip from Singapore, factory Yokomo driver Nicolas Lee would be fastest in the other two qualifiers putting him second in the A-Main ahead of team-mate & defending Champion Simon Nicholson. Setting a new track record in qualifying, Hamon would wrap up the title by taking the first two A-Mains. Lee would win A3 to finish runner-up with Nicholson completing the podium after winning out on the tie breaker with new ARC signing Brayden Stanley. In 13.5T, Awesomatix’s Marcus Askell took the title.

Image: Jeff Hamon [Facebook]