Red RC

February 1, 2008

Zack Barry dominates Indoor ROC

Xray are reporting on the 2008 18th Scale Indoor Off-road Race of Champions that were held last Sunday at RC Madness in Enfield CT. This was the third year that this warm up race for the 18th Scale Off-road Nationals was held and attendance at the race was good with approximately 80 entries. Three rounds of qualifiers were run and then the mains and it was Zack Barry that finished the qualifiers with the TQ in all three classes entered, he also won every qualifier that he ran. Zack went on to win the A-mains in all 3 classes, winning by 2 full laps in each race.

Source: Xray [teamxray.com]

February 1, 2008

GRP Engines Tooling system

GRP have released a new engine tooling line to ease all those routine operations that are essential for proper maintenance of any engine. All tools in the kit, which include a flywheel puller, bearing remover and a tool for removing the liner are made from steel and then treated and trued to guarantee maximum precision and durability. The use of these tools mean that all operations can be carried out with maximum simplicity and precision.

Click here to see the tools in use… content

February 1, 2008

Piktor Rush 2 1/8th scale buggy

Shown for the first time at last years toy fair in Nuremberg, a year later the Rush 2 from Piktor has finally gone on sale. This unique looking 1/8th scale buggy, which was a finalist at last years Euros, features low CG suspension configuration and lay down dampers which achieve high stability on bumpy tracks, precision on fast parts of tracks, fantastic grip on corners and perfect handling on the big jumps. The Rush 2 is easy to set-up because it can adapt to all types of tracks and all types of surfaces.

Click more to see the full specification and features list… content

February 1, 2008

Team Magic E4RS Rubber Spec

Team Magic have released the rubber spec of their E4 electric touring car, called the E4RS. Similar to the Foam Spec E4FS, in regard to its new features such as the new shocks, thickened arms and widened belts, the RS features a 2.5mm thick carbon fibre chassis plate, 2mm thick top deck and is supplied with a front spool, steel front CVD’s & aluminium rear CVD’s.

Click here for the feature list and more pictures… content

January 31, 2008

Ielasi wins on debut for Shepherd

We got word from Shepherd Racing that newly signed team driver Daniele Ielasi won last weekend in Lucca, Italy in his first race with the Velox. With the Shepherd team, consisting of Robert Pietsch, Patrick Schäfer and Armin Weihert, in attendance to give support, Daniele quickly became comfortable with the car and could improve his lap times constantly. The race saw 50 drivers in attendance including 2 time European Champion Dario Balestri as well as Marco Vanni and Stefano Puccinelli and after Saturday’s practice session it was clear that the battle for the win would be between Dario and Daniele. After 3 qualifying rounds on Sunday morning, and with drivers battling with fuel consumption, it was Balestri that took the pole position just in front of Ielasi in 2nd. With changes to his muffler prior to the final Daniele immediately jumped into the lead in front of Balestri, Vanni and Puccinelli and up to the first pit stop the Velox racer could increase his lead at the front of the pack. By the middle of the final there was a gap of 8 seconds between the first 2 racers but 6 minutes before the end Dario had to stop with glowplug failure while Marco Vanni also had to retire because of gearbox problems. This left Daniele to cruise home in first, taking his first victory in his first outing with his new team.

Source: Shepherd [team-shepherd.com]

January 31, 2008

K-Factory TC2 Motor Cooling set

K-Factory Motor Cooling Head & Fan Set

More new items from K-Factory who have released the TC 2 motor cooling head & fan set. This is very similar to K-Factory’s TC motor cooling head we wrote about previously but it has four small screw holes in it. The addition of these screw holes allows you to install one or even two fans on top of the heat sink to blow cold air directly down onto your motor. This set comes supplied with the cooling head, 1 x fan, screws and a thermal pad.

Click here to see the set mounted and also 2 fan option… content

January 31, 2008

Serpent S400 Roll Centre spacers

New from Serpent for tuning your S400 are these 2 new sets of roll centre spacers. Designed to fit between the chassis plate and the lower wishbone suspension brackets, they allow the user to adjust the cars roll centre as well as giving the option to run anti squat or anti dive. Made from lightweight aluminium, they are available in 0.6mm and 1.0mm thicknesses and are sold in pairs.

Source: Serpent [serpent.com]

January 31, 2008

Losi Tuned Flex 8ight Chassis

Losi have announced the release of this Tuned Flex Technology Chassis for their popular 8ight Buggy. Milled at exact points to give more flex to the chassis while not sacrificing chassis flex at the gear mesh, the tuned flex technology offers greatly improved overall traction and stability on all track surfaces and has been vigorously tested worldwide by Losi drivers Adam Drake, Mike Truhe and Yannick Aigoin.

Source: Losi [losi.com]