Red RC

June 29, 2021

Reedy Zappers DR competition HV-LiPo drag race packs

Reedy’s new line up of Zappers DR batteries use state-of-the-art LiPo chemistry with advancements in construction that result in improved power output and internal resistance without sacrificing durability. Striving to improve all aspects of battery performance in the increasingly popular and competitive world of RC drag racing, Zappers DR batteries feature a 3.8V/cell nominal voltage, meaning that the battery can be safely charged to 4.35V/cell. It is not a secret that more voltage equals more power, so there is no easier way to increase power and top speed than a higher charge voltage. But even when the typical 8.44V (4.22V/cell) charging limit is enforced, Zappers DR shine thanks to their inherently flat discharge curve, which results in higher voltage when multiple passes are required between charges. Available to suit a variety of chassis configurations and the class requirements of different racing groups, to keep power-robbing resistance to a minimum, hard-case models are equipped with 5mm sockets (male ESC connectors are included), while soft-case models feature 10-gauge wire and XT90 connectors.

Source: Associated [associatedelectrics.com]

June 29, 2021

Berlincioni & Donadelli win at F1 Supercup

After a long break the F1 Supercup returned last weekend at La Valletta, Italy. In the F1-70 class Andrea Mariani pushed Matteo Berlincioni hard for the win, however the latter was able to hold on for the victory with William Carrato taking the final podium spot. The F1-70 class showed some solid numbers in terms of drivers attending as well as laptimes, despite the class being based more on looks than tech. In the F1 Class, there was another close battle between the top 3, with the difference in the best laps down to the hundredths of a second. In the end it was Marco Donadelli with the win in front of Simone Brocca, with Fabrizio Villa 3rd.

View the F1 podium here

June 29, 2021

R1 Wurks low profile digital drive servo Gen2

R1 Wurks have released Gen2 of their low profile digital drive servo. With an input voltage of 4V to 8.4V it can be used across a multitude of platforms. Featuring a super smooth coreless motor and enhanced servo centring technology, this makes for a high speed and high torque servo (14kg at 6V / 17.5kg at 7.4V). Set inside a lightweight aluminium case with all metal gears, this version comes with a 80mm short wire for tidy installation.

Source: R1 Wurks [r1wurks.com]

June 28, 2021

T-Works touring car stand V2

T-Works have released V2 of their touring car stand. Made from machined aluminium, the black anodised legs sport edge chamfering and are attach to the main carbon top plate for a strong but lightweight stand. The top plate features holes for mounting shocks and gear diffs for rebuild and it comes supplied with foam strips to prevent your car from sliding off the stand and to stop the stand sliding off your bench.

View another image of the car stand

June 26, 2021

Serpent Medius X20’21 FWD chassis

Serpent have introduced an update to their Medius X20 FWD chassis, with a focus on the car’s steering and drivetrain. While the majority of the car remains the same as its predecessor the car now comes with the all new dual ball bearing DJC shafts in the front, and in the rear the all new ball raced CVDs are included as standard. Giving ultra-smooth & silent torque application throughout the suspension and steering travel. Keeping with their successful dual pivot ball suspension system, they have created even more adjustment to fine tune the handling characteristics. Their new steering hub allows adjustment of axle height, offset and roll centre. Utilising these options has allowed their team drivers to create more corner speed over the previous model. And finally you can now have the option to side mount your LiPo battery.

View more images of the Medius X20’21 here

June 25, 2021

SWorkz S35-4 red suspension inserts

A simple update from SWorkz who have released their plastic suspension bracket inserts in red. The standard S35-4 series black plastic inserts are now available in this striking red colour and they will fit all S35-4, S35-GT2 and S35-T2 nitro and electric series cars.

View another image here

June 25, 2021

FX release further details on the K303

Having previously teased the new K303 engine, FX have released some further details on this new .21 buggy motor. With a focus on longer runtime, this 3-port motor has a DLC coated crankshaft which has been balanced with two tungsten inserts and comes as standard with a ceramic rear bearing. Externally the biggest change over its predecessor is the 9-rib cooling head.

Source: FX Engines [fx-engines.com]

June 25, 2021

T-Works B6.3/D bellcrank plate & servo mount plate

Two new items from T-Works for the Associated RC10B6.3/D, starting with this steering bellcrank plate. Machined from 7075-T6 aluminium, it replaces the stock plastic part and adds strength to the front of the bellcrank. It has been anodised black and features machined chamfered edges. Also for the steering of the car is this carbon servo mount plate, which again replaces the stock plastic part adding that factory look.

View the steering servo mount plate here