Red RC

August 19, 2007

Much More battery packs

Much More have extended their range of general purpose NiMH battery packs with the release of a number of different formats to suit various different requirements. First up are the 7.2V Power Sport packs that come in both 2200MAh and 2800MAh while also released is a Sport Stick pack that is also 7.2V but is 3800MAh. For longer run times Much More have also introduced their 4500 Select 6 Cell pack that can be used in cars as well as starter boxes and other high power applications. Finally from the Korean company are 2 new receiver packs, one 1500MAh 6V flat pack for use in gas on road cars and a Hump configured packo of the same cells for use in off road gas cars.

Click more to see the other packs… content

August 19, 2007

Robitronic Mantis TXS truggy

Robitronic have released their new entry level 1/8th scale truggy, the Mantis TXS, which is based on the companys competition truggy, the Mantis. The TXS was designed to bring high performance to beginners and racers and comes pre-built as RTR with the only thing needed are batteries for your radio and car, as well as fuel.

Click here for the full product details… content

August 19, 2007

Xray XT8 Wheel Stickers

Xray have released more decal sets for their off road cars with the release of these rather funky looking wheel decals for the XT8 truggy. These full-colour graphic sets for XT8 dish wheels makes a bright, bold visual statement, setting your car apart from the crowd. Made from tough, self-adhesive vinyl for easy application and long wear, the stickers are die-cut so you just have to peel off the sticker and apply to the wheels. Available in various luminous colors.

Source: Xray [teamxray.com]

August 18, 2007

Xray NT1 Pinion Gear Tool set

Xray have released this set of two XCA-clutch pinion gear tools to help install and remove pinon gears to and from the XCA clutchbell. The tools are moulded from a special composite mixture which ensures very high durability and very precise fitting to the pinions. The pinion gear tool is specially designed to fit the NT1 pinion gears which have very specific and unique teeth profile and design. The tools fit all NT1 pinion gears, both 1st gears – 15, 16, 17, 18T and 2nd gears – 20, 21, 22, 23T.

Source: Pit Work [pitwork.co.kr]

August 18, 2007

Edit RC TC Shock Stand

Edit RC have introduced this new flat pack touring car shock stand that helps you get your shocks built faster and with minimal fuss. The stand holds four shocks to enable you to quickly assemble shocks at the track or at home, then folds away flat to fit in your pit bag or tool box. Made from cool anodized aluminium with a laser-etched Edit logo for a great low-key look to your pit space the stand also sports convenient laser-etched markings so you don’t lose track of your front and rear shocks.

Source: Edit RC [rc-edit.com]

August 18, 2007

Hudy Ultra-Fine Ride-height Gauge

Hudy Ultra-Fine Chassis ride-height Gauge

Hudy have released this ultra-fine chassis ride height gauge for 1/10th nitro and electric touring cars. Ranging from 3.8mm to 8mm the steps are in super-precise increments of 0.2mm amongst the most popular measurement ranges, finer steps than normal ride height gauges that normally are in increments of 0.5mm, this allows very precise adjustment of the front and rear ride height. The tool has been made from CNC-machined, high-quality lightweight duraluminum and features an elox-coating for a smooth, long-lasting finish.

Click to see the tool in action… content

August 18, 2007

Russian EP Off-road Nationals 2007

Last weekend, the best electric buggy drivers from around Russia came to the RC2 track in Moscow to compete for the 2007 Russian National title. Qualifying saw Kyosho racer Ivan Laptev take the pole position from the JConcepts pairing of Dmitry Malyshko and Victor Spiridonov in 2nd and 3rd. In the race it remained the same with Laptev taking the win and the 2007 title ahead of Malyshko, who was using the MRC Models buggy wing, in 2nd and Spiridonov in 3rd.

Click to see more photos from the event… content

August 17, 2007

Hudy Ultra-Fine Droop Gauge

Hudy have released this ultra-fine chassis droop gauge for 1/10th nitro and electric touring cars. Ranging from 4mm to 6.8mm the steps are in super-precise increments of 0.2mm amongst the most popular measurement ranges, finer steps than normal droop gauges that normally are in increments of 0.5mm, this allows very precise adjustment of the front and rear droop. The tool has been made from CNC-machined, high-quality lightweight duraluminum and features an elox-coating for a smooth, long-lasting finish.

Click here to see the tool in action… content