Red RC

June 26, 2007

X-Factory announce the X-5 Squared

X-Factory announce the X-5 squared

X-Factory have released detailed information on the sequel to the companies competitive X-5 4wd buggy platform, called the X-5 Squared. The changes are to the cars molded tub chassis which receives 15 little tweaks for extra strength and better durability and all round fine tuning while the material for the chassis has also been changed to make the overall car stiffer. These changes came about from listening to their team drivers experiences and if you look in the pictures below you can see the changes to the tub highlighted in blue.

Click here to see the changes… content

June 26, 2007

Daniele Ielasi wins French EFRA GP

The French EFRA GP was held last weekend at the super fast Grenoble track in the South of France, near Lyon. Weather was good for most of the event and on a track that required a fast engine that was not thirsty on fuel it was Kyosho racer, and Picco employee, Daniele Ielasi that took the pole position ahead of Alberto Picco, racing a Mugen, while the final 2 direct qualifiers were Shepherd Velox racer Robert Pietsch in 3rd and French Championship front runner Nicolas Guillot racing for Mugen in 4th. Before the final it start to rain quite heavy and this meant that a number of drivers didnt take the start including Picco, Guillot and Bertin, who ran with a JP motor at this race, and left the other racers struggling to find the best tyres for the changing conditions. After a small rain delay, the event got underway and Ielasi and Pietsch immediately pulled away at the front, leaving the rest of the field to battle for the lower places with the chasing pack being headed by Mugen driver Walter Salemi in 3rd. With 7 minutes to go, Pietsch ran into radio problems which took him out a certain 2nd place and promoted Salemi into the runner spot, which is how it finished, with Ielasi winning by a lap from Salemi in 2nd and Serpent racer Arnaud Chaussard in 3rd.

Click here for the final standings… content

June 26, 2007

Tim Wood wins Rd5 of UK 1/8th Nats

Last weekend, under changing weather conditions, saw the 5th round of the BRCA 1/8th scale Nationals run at the Halifax track in the north of England. In qualifiying, and despite rain plaguing the event, everyone managed to get a dry run in which allowed Tim Wood, racing a Serpent 960, to take the pole position spot ahead of 2nd placed James Connolly racing a Kyosho Evolva. In the final, which some drivers decided not to race because of the weather, it was Tim Wood and Mugen racer Andrew North that had a close battle in the early stages but as the track dried Andrew started to drop back, leaving Tim to take the win, 2 laps ahead of 2nd placed Gareth Bell who managed to pass North in the closing stages demoting him to 3rd.

Click here for the final results… content

June 26, 2007

Corally parts for RDX Phi and SP12X

Corally have been busy recently, with the release of lots of optionals for their 2 flagship cars, the RDX Phi and the SP12X. First up for the RDX Phi, we have this ball differential that uses lightweight duraluminium out shafts, large thrust bearings and an innovative nut type diff adjustment that replaces the usual screw adjustment. Also for the Phi is a new front one way system, that allows you to use the new front pulleys that have also been released, also there are new front and rear bearing holders that allow you to adjust the wheelbase of the car. The Phi now also has a choice of optional chassis plates in different thicknesses (2.9mm, 3.4mm), new top deck in 2.9mm carbon, a graphite battery plate, a newly colour center steering lever and finally some new front bearing holders that make swapping between diff / spool and the one way axle super simple.

Corally have also released new parts for use with the SP12X WC front end, such as the lower graphite A-arm spacers for ride height adjustment, a new graphite cross brace for greater stiffness and a new type of 43mm duraluminium turnbuckles. And finally Corally have released blue (hard) damper syrup for tube and friction dampers which now comes in air tight smart mini-bottles.

Click here to see the other products… content

June 26, 2007

Grepow SC4200 NiMH Cells

We were contacted by Speedzone, to tell us about the Grepow 4200MAh matched cells that they are now selling. These cells allow great runtime and reliability and have proven to be a lighter, more consistent cell, with no drop-off and minimal self-discharge when compared with other cells available in the market. All Grepow matched cells are labeled with Speedzones standard matching information, including the cells release date.

Source: Speedzone [speedzoneusa.com]

June 26, 2007

3Racing optionals for Xray NT1

We showed you the new 3Racing one piece QC engine mount from their new line of Xray NT1 optionals yesterday and today we have the full list of optionals to be released for this car. All the 3Racing aluminium parts for the NT1 will be anodised red and while I wont go into detail about each product I will say that this is an extensive line of optionals, and if you own the car it will be pretty obviouse what part it is. Also note that these parts arent yet released and also that there are many more not shown, because there was no picture or it was a CAD image.

Click here to see the rest of the products… content

June 26, 2007

Much More CTX-W & Silent Charger Platinum

Much More CTX-W Platinum

It appears that black screens are all the rage at Much More these days, following on from the release last week of the Motor Master Platinum with the black LCD display. Today sees the release of both the CTX-W Platinum tire warmer and the Silent Charger Platinum, both of which have been ugraded with the cool new screen that was only seen previously on the Moore and Rheinard editions. Apart from this change there are no other updates on the tire warmer but the Silent charger has been upgarded to have user selectable 3-step delta peak sensitivity (Low-Medium-High).

Click here to see the Silent Charger Platinum… content

June 26, 2007

Trinity Critical Mass 3600 Sport Pack

The guys from Trinity were in touch to tell us about their new “Critical Mass” sport pack that features the EP 3600 mAH cell which is based on the same technology East Power developed for their 4200 mAh M-III cells. Designed for higher voltage output and longer run time the EP 3600 is one of the most durable sport battery packs on the market. The internal resistance of the EP 3600 cell makes it suitable for all stock, 19 turn spec and milder modified motors down to 13 turns and its also suitable for all brushless motors.

Source: Trinity [teamtrinity.com]