Red RC

June 14, 2007

Kalinowski wins Rd3 German 1/10th West

Last weekend saw the 3rd round of the 1/10th 200mm West German Regionals held at the Megadrom Geilenkirchen, in the very West of Germany. Saturday saw only rain and so the 34 drivers present at the event got no practice and had to wait until Sunday to attack the track. After the qualifying it was Serpent racer Markus Mobers that had claimed the pole position for the main final ahead of Mugen racers Rene Püpke and Dominik Reschke. In the race Markus could lead easily until his engine flamed out during a pit stop, handing the lead to Mugen racer Heinz Jürgen Kalinowski who took the win from a recovering Mobers, with Rene Püpke in 3rd.

Source: MID [mid-mugen.de]

June 14, 2007

Parma Pro 38 on-road racing tires

Parma have begun selling their new Pro 38 on-road racing tires for 1/12th scale chassis’. These new Pro tires feature a larger 38mm wheel for improved performance and handling while the overall diameter is the same as their standard tires, thus creating a lower profile rubber. Suitable for all popular 1/12 race cars, and available for front and rear, it is 100% guaranteed not to come unglued from the wheel under normal use.

Source: Parma [parmapse.com]

June 14, 2007

Diggity Designs Kyosho RB5 shock towers

Diggity Designs, whose products we have featured previously, have announced the release of these new shock towers for the Kyosho Ultima RB5 2wd buggy. Made from 3mm thick carbon fiber these super strong replacement towers are available for both the front and rear of the car and come supplied with the required fasteners needed to mount them.

Click here to see the front shock tower… content

June 14, 2007

Hot Bodies chassis protect sheet

Hot Bodies have released this Chassis Protect Sheet, essentially a large clear plastic sticker, to provide extra durability and protection for your chassis, whether you’re racing off-road or on road. The clear self-adhesive PTFE plastic is very slick and provides minimum friction if your car bottoms out, or slides over bumps, while the sheet keeps scratches and nicks off your graphite or aluminium chassis plate.

Source: Hot Bodies [hbeurope.com]

June 14, 2007

New parts from Mugen Seiki

Mugen Racing in the US were in touch to let us know about some of their new products available for Mugen racers. First up are these wicked pivot balls for the MBX5-R and MBX5-T that are super light, yet strong, thanks to their unique construction which sees the use of an aluminium ball combined with a steel stud. Next up is a new large Mugen Seiki carrying case which is blue in colour and contains 4 large drawers made from light and durable corrugated plastic material. And finally is the release of 2 new additions to the Mugen tool range with the introduction of a 5.5mm and a 7mm nut wrench.

Click here to see the other products… content

June 14, 2007

XRAY Column – XT8 Truggy

Xray Column

The 9th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj takes about the development of the newly released XT8 truggy and the work that went into producing this car, from concept, to testing, to final production as well as the many setbacks on the way to market.

Having most of the parts finished and ready for the release for spring, we were hit with some very annoying bad news – the market standard for the truggy class had developed significantly within the last year, including the requirements for a 150cc fuel tank. Again we were faced with another difficult decision… either release the XT8 with the planned buggy fuel tank (120cc capacity) which would cause some negative feedback, or delay the project again and make a completely new mould for a larger fuel tank.

Read the full column here.

Source: Xray [teamxray.com]

June 13, 2007

Daily News Round-up

Red RC - Daily Round-up

A summary of other news pieces from around the internet today in our Red RC Round-up:

> Automodelisme have a large gallery of images from last weeks EC ‘B’ – Link [automodelisme.com]
> Jared Tebo took a double win at the annual Summer Nitro Fest – Link [neo-buggy.net]
> Hot Bodies Cyclone 12 to be released in August – Link [rcworld.ch]
> Richard Saxton gives his comments on the Associated RC8 – Link [minioffroad.se]
> Xray have a full report on the Portugese EFRA GP – Link [teamxray.com]

June 13, 2007

Edit RC10B4 Ball Bearing Set

Edit, the optional parts maker, have announced the release of this new bearing set for the Team Associated RC10B4. These bearings are better than the stock bearings that come in the stock kit, allowing you to see a difference on the track and at the workbench. ABEC 3 (ISO Class 6) rated, these bearings are of a higher precision than most manufacturers standard bearings with tighter tolerances for fit.

Source: Edit [rc-edit.com]