May 22, 2007

BRCA Touring Rubber and Truck class Rd3

BRCA Touring Rubber and Truck class Rd3

Report by Mark Christopher – The weekend of 13th and 14th May saw racers attend the fantastic Cotswold track, where they were greeted to a dry Saturday for open practice. Conditions cahnged however and Sunday saw the racers and crew welcomed by a cool damp morning and as everyone was setting up their pit areas the rain began to fall, leaving a damp slippery surface.

In the rubber class Mathew Thompson set TQ with his Serpent 720 showing his local knowledge of the track while in the trucks Craig Nutting got a clean run with his Team Magic car. By the end of round two of qualifying the rain was now showing no mercy and the track was covered in water, due to the design of the Cotswold track there were no deep puddles. Even so many drivers decided to wait for the finals and only a few ventured out to do a few laps to check their water proofing and tyre choice.

Continue Reading… content


May 22, 2007

Robert Batlle wins Ripoll race

Robert Batlle wins Ripoll race

Spanish HoBao racer Robert Batlle has won the latest round of the Championship of Catalunya which was held last weekend at the Ripoll circuit. Batlle won ahead of Crono racer Adrian Hernandez who came home in 2nd place while Mugen driver Carlos Pinenda ended the race in 3rd.

Click here for the final results… content


May 21, 2007

Hernandez & Garcia wins Spanish buggy Nationals Rd2

Spanish buggy Nationals Rd2

The 2nd round of the Spanish 1/10th electric Buggy Nationals took place last weekend at the Coslada track near Madrid. In the 2wd class it was top 1/8th scale buggy racer Borja Hernandez that took the win driving his Losi XXX CR ahead of fellow Losi racer Alberto Garcia in 2nd while 3rd place belonged to Alberto Cano. In the 4wd class Alberto Garcia was once again in form, taking the win from JConcepts racer Enrique Fucinos in 2nd with 3rd falling to 2wd winner Hernandez.

Click here for the final results… content


May 21, 2007

Darren Johnson wins BRCA 200mm Rd3

Darren Johnson wins BRCA 200mm Rd3

The third round of the British 1/10th 200mm Nationals took place last weekend at the fast flowing Halifax track and while Saturday saw only wet weather practise, for Sunday it was dry with the grip soming up, but only on the racing line. Spanish EFRA GP winner Darren Johnson took TQ running the new Team Magic G4+, just ahead of Serpent racer Mark Green with Chris Slater in 3rd. At the start of the main final everyone got away clean but Green had to pit early for an engine adjustment which left Darren leading closely followed by Mark Gilliland. Unfortunately Mark Gilliland had problems at his first fuel stop, so that put him down the order. Whilst the others had their troubles, Darren had a clean race which gave the Team Magic G4+ a debut win at the BRCA Nats, closely followed by Mark Green with young and impressive Kyle Branson in 3rd.

Click here for final results… content


May 21, 2007

Werks Racing TL21B3-Pro Race Engine

Werks Racing TL21B3-Pro Race Engine

Werks Racing have introduced the newest addition to its ‘Team Line’ of engines, the TL21B3-Pro utilizes an improved case design featuring additional stiffening ribs around the sleeve area to control heat expansion, while a new long stroke design, coupled with a race proven 3-port design, provides the perfect blend of strong torque and aggressive top end. The B3-Pro features much of the same factory machining normally only found in higher priced hand modified engines which includes extensive casework improving the primary boost port as well as the transfer ports. Fuel flow is further improved on the sleeve by machined teardropping of the transfer ports as well as a series of crankshaft alterations and combustion chamber changes that include a new fluted crankshaft with revised timing.

Source: RCCA [radiocontrolzone.com]


May 21, 2007

Chris Grainger wins Rd2 of BRCA Mod Nats

Rd2 of BRCA Mod Nats

Making it 2 in a row, Yokomo racer Chris Grainger has won the 2nd round of the BRCA Modified Nationals that were held last weekend at the Aldershot track. In qualifying, Chris had set the TQ time followed closely by HB team mates, World Champion Andy Moore in 2nd and Olly Jefferies in 3rd, a close battle that would continue into the first leg as the top three battled for the lead, with Chris, Andy and Olly all taking turns to lead the frantic first leg. A mistake by Olly dropped him back leaving Chris to chase Andy but despite his best efforts Chris had to give best to Andy in leg one. Leg two resulted in a win for Chris and combined with his FTD gave him the overall victory, with Andy in 2nd and Olly 3rd. This result consolidates Chris’s lead in the Championship as the season heads to Halifax for round 3.

Click here for the final modified results and Stock report… content


May 21, 2007

Team Losi 8ight-T Ready to Run

Team Losi 8ight-T Ready to Run

Team Losi have released the RTR version of their popular 8ight Truggy, which comes complete with the Spektrum DX2.0 radio system.

Starting with the same innovative ultra-narrow chassis and drivetrain layout as the 8IGHT-T Race Roller, the 8IGHT-T RTR packs power and handling superior to the competition right out of the box. Losi’s 427 Big Block engine and tuned exhaust come pre-installed, along with the premium Spektrum® crystal-free DX2.0 radio system for unmatched control. The centrally mounted motor, oversized shocks, thick aluminum chassis, and numerous other ingenious features yield both performance and durability.

Click more to see the feature list… content


May 21, 2007

Mega MF21 OFR 5P buggy engine

Mega MF21 OFR 5P buggy engine

Serpent have announced the release of their latest Mega motor, which is the first Mega buggy engine to be released that uses the Novarossi based Massimo Fantini made engine. The Mega MF21 OFR 5P 3.5cc engine is a top of the line buggy engine which as the name suggests has a 5 port liner and also features a lightened and hard coated crankshaft with a large turbo scoop. The motor itself uses a non turbo plug, has a large cooling head and the front bearing uses a rubber seal to prevent dirt getting into the motor from behind the flywheel.

Click here to see other pictures… content