Red RC

April 6, 2007

Salven dominates Rd2 of German Region West series

Rd2 of German Region West series

Michael Salven has won the 2nd round of the German West series for 1/8th scale that took place last weekend at the Dormagen track, near Cologne. Driving his Mega ZX21 powered Serpent 960, Michael could easily take the top qualifying spot by half a lap ahead of 2nd placed qualifier Kyosho racer Christian Wurst, as well as setting the fastest lap of the event, and could win the main final by 9 laps ahead of young Kyosho driver Tobias Hepp in 2nd with Mugen racer Andreas Janz in 3rd a further 2 laps back. Christian Wurst was battling with Hepp for 2nd position up until he retired at the 17 minute mark with a servo failure.

Click here to see the final results… content

April 5, 2007

Schumacher Job opening

If you’ve ever wanted to work in the RC industry, or perhaps you already do and want a change of scenery, then Schumacher USA may have the job for you, with a position opening in their Sales and Marketing department.

To be responsible for sales and marketing of Schumacher R/C cars and accessories in North America, based in Tampa, Florida. Requirements are good sales and marketing skills and experience, and a knowledge and enthusiasm for R/C cars.

For more information e-mail Robin Schumacher or phone him on 00 44 1604 790580.

April 5, 2007

V-Dezign Carpet Ripper ’07

V-Dezign Carpet Ripper '07

V-Dezign, the 12th scale conversion makers from Finland, have announced that they will start selling their 07 Carpet Ripper in May. This car has dominated the British Nationals in the hands of Andy Griffiths and also done very well in the Finnish Nationals with car designer Vesa Yli behind the controls and last week the V-Dezign got two cars into the European 1/12th scale A-main final and went on to finish in 4th and 10th at the hands of Griffiths and Yli. The Carpet Ripper ’07 will be available first as an update kit for cars like AE L3, L4 and other US based T-bar cars with the car available as a complete kit later on.

Click here to see some kit specs and more pictures… content

April 5, 2007

Unity Tool Inc. Tweak board

Our site partners, Kimihiko Yano, have got the lowdown on their site about this tweak board made by American company, Unity Tool Inc. As you can see from the picture, it is suitable for 1/12th scale chassis’ but also for 1/10th and 1/8th scale too, and basically allows you to measure and set your cars track width, camber, caster, toe in, toe out as well as helping you tweak your car correctly. The whole kits comes apart to be put away back in the supplied carry bag and if you havent seen this before you can see more pictures of it in its various uses here.

Source: Kimihiko Yano [kimihiko-yano.net]

April 5, 2007

Mega MF12 3P MasMo Ceramic IFMAR

Yesterday we wrote about the new 9 port Mega MF21 Nine being released by Serpent and today its the turn of the upgraded Mega MF12. This new Mega MF12 3P MasMo Ceramic IFMAR is based on the previous MF12 but due to the new EFRA rules regarding the crankshaft, this motor has been upgraded and now comes with a new IFMAR / EFRA ’07 legal crankshaft with huge turbo scoop. As this engine is the hand tuned version it also sports hand tuning work by Massimo Fantini on the inside of the casing, the liner and on the crankshaft as well as sporting ceramic bearings throughout.

Click here to see the new crankshaft… content

April 5, 2007

Trinity EPIC Shock 19 hand wound motor

Trinity EPIC Shock 19

Trinity have been keeping busy the last few days with a number of new releases and their latest is the EPIC Shock 19 motor which is 19 Turn hand wound spec version of their EPIC Shock modified motor. The EPIC Shock 19 is the first 19 turn spec motor to offer an aluminum endbell for greater cooling and higher motor performance and meets all ARCOR & ROAR specs for this class of motor. Yours for $65.00, Available now.

Click here to read the full feature list of the motor… content

April 5, 2007

Ryan Cavalieri wins RCX Supercross

At last weekends RCX show, as with every year, a Supercross race brings together the best drivers from every major factory team to see who is the best and walk away with a cash prize of $500.00. The racing format consists of 3 heats of five drivers racing for 3 minutes with only the top two from each heat advancing to the main event. Team Associated racer Ryan Cavalieri won his heat with the new RC8 and took his spot into the main and when the gate dropped, it was Cavalieriâ€™s Team Orion Wasp .21 powered RC8 that grabbed the holeshot and despite a first lap incident, Cavalieri came back through the field and made an amazing pass on the last lap to give him the win and the $500 cheque.

Source: Team Orion [teamorion.com] Image: Deron Neblett [deronneblettphotography.com]

April 5, 2007

CRF Wasp Rev Discovery Set

Limited to 400 pieces world wide, each with a signed certificate by Adrien Bertin, this one time special set has been prepared by Adrien Bertin and extensively tested to ensure the greatest success for the end user. The set includes a CRF .12 Engine, with 2007 improvements on the crankcase and carburettor, EFRA 2647 Torque pipe set with the long conical manifold, CRF Clutch conversion for the Kyosho RRR, CRF Big Venturi for extreme power all packaged in a black Team Orion Engine Bag. And the most exciting part of the Wasp Rev Discovery set is the price, expect to see it on the shelves for EUR 299.00, when it is released on April 10th.