Red RC

September 22, 2021

JConcepts 1987 Chevy Camaro IROC-Z body

Visually stunning, physically exhilarating, artfully balanced, the 1987 Chevy Camaro is all these things and more. One of the major reasons the JConcepts team underwent a project of this statue was to produce one of GM’s most sough-after vehicles of the 1980’s. A project originally started in October of 2020 has since seen some revisions along the way to accommodate an ever-changing Drag racing and Bashing segment in the RC market. A tight overall width to settle into today’s latest lineup of manufactured vehicles such as the DR10, 22S, and Drag Slash make the Camaro a fun and fit performer. Flat panel designs signified this generation and peaked during this era of the Camaro. Bucket headlights stand-out on the front-end with dual lights and bezels, the 87 looks so ominous. On top of the hood, two recessed ducts can be louvered out with the included decal sheet. The pointed front-end carries to the fenders, through the doors and back through the rear fender creating that transitional body line from top to bottom. Highly detailed recessed windows provide a large viewing area for the 2-door drag racer.

View more details & images here

September 21, 2021

Reedy WolfPack Shorty LiPo batteries with XT60 Plug

Reedy’s WolfPack Shorty LiPo batteries are now available with the popular XT60 plug. This unique battery is perfectly suited for trail trucks, crawlers and a variety of vehicle types that use a shorty battery configuration. Wires exit the case through a rubber gasket that protects the wire’s insulation while helping to prevent moisture from entering the case. High quality cell manufacturing and construction techniques result in reliable operation and maximum cycle-life. Reedy’s latest WolfPack LiPo batteries come equipped with beefy silicone wires and an integrated balance lead with XH connector.

Source: Reedy [associatedelectrics.com]

September 21, 2021

Rohrmoser wins Austrian 1/10 IC Championships

The 1/10 IC Austrian National Championship concluded last weekend at the MAC Amstetten circuit. This was the fourth event of the season, with each round so far producing a different winner. Simon Ciudan won Rd1 at MAC Mistelbach, Stefan Strasser took Rd2 at SFMAV, and Christoph Rohrmoser came home first in Rd3 at RC Parndorf, meaning the championship was wide open. Rohrmoser secured pole position for the 45-minute final, as the three previous winners took the top three places on the grid. It then turned into a lights-to-flag victory for Rohrmoser, as his MAV-powered Xray ran up front for the whole duration of the race to secure his third consecutive title. When the other points were added up, Stefan Strasser secured second overall, with young Michael Katzmayer third in the standings.

View the final series standings here

September 21, 2021

Jesse Keller takes Rd4 of Dutch Nationals

Last weekend the 4th round of the Dutch Nationals took place at the Mac De Baanbrekers track. In the NK class it was Shepherd driver Jesse Keller with the victory. In qualifying he had to settle for the second place behind Robbin Hertong, but in the main final Jesse he was able to take over the lead when Robin suffered some technical problems. After 30min Jesse crossed the finishing line a lap in front of Arie Manten with Ricardo Hofmeijer completing the podium another 2 laps down. With this result the championship will be decided between Jesse and Robbin at the final race at Raco2000 On & Off Road Circuits Nederland.

Source: Shepherd [team-shepherd.com]

September 21, 2021

JConcepts Tusk & Hunk Class 1 tires

JConcepts continues to muscle new scale off-road items into the market with the introduction of the Tusk 1.9” tire. After successful class 1 tires such as the Landmines and Bounty Hunters, the team focused on a new design with learned information by driving, crawling, and important input from a heap of development time by the JConcepts team. The team retained the 4.19” sizing making it an approved and scale-based tire, but the tread layout went under the scope for changes. The Tusk has an animal like instinct while it makes its way over terrain with hefty lugs and sidewall support. The centre of the tire starts with a V-shaped lug with multiple steps to the sides for additional grip while the green compound rubber flexes and contours to the landscape. The design team added large, staggered traction bars off the side continuing the V-shape pattern and while the shorter version steps in conjunction with the centre lug, the longer version fills a void underneath and meets up near the centre line of the tire.

View more information on the Tusk & Hunk tire here

September 21, 2021

Coelho victorious at ETS Rd3 in the Netherlands

The third round of ETS Season #14 2021/22 took place on the ground of the AMCA Apeldoorn in the Netherlands. With 200 entries in the six ETS racing classes, the event started with a free practice day on Thursday and a good weather forecast for the whole weekend. As always at the ETS, the race included 4 rounds of qualifying followed by triple mains for everybody. Everything was prepared in a perfect way by the AMCA Apeldoorn and the amazing racetrack was awaiting all drivers. In the Matrix Modified class it was Xray’s Bruno Coelho who was able to win three rounds of qualifying with his teammate Alexander Hagberg taking the other round. With Coelho being on pole, Mugen Seiki’s Ronald Völker scored three second places which let him start second on the grid in front of Yokomo`s Yannic Prümper (3), Xray`s Alexander Hagberg (4) and Awesomatix driver Marc Rheinard (5). The field of modified drivers was on a super high level once again and the fight for the A-Main spots was as close as possible in between some hundreds of a second.

Continue reading the race report here

September 20, 2021

RDRP B6.3 +3mm LCG 7075 aluminium chassis

The Revolution Design Racing Products +3mm chassis has been updated for the ultra-popular Team Associated B6.3 2wd buggy. As before, it mirrors the optimised length of the original B6.2 and B6.3 chassis to improve handling in high-bite track conditions such as carpet and Astroturf, making the car easier and faster to drive at the same time. Of course, the new chassis is prepared to accommodate new-generation servo mounts such as the B6.3 kit item or the RDRP LCG servo mount set. Machined from aircraft-grade 7075 aluminium for strength and optimised flex characteristics, the black anodised surface is the perfect basis for a stealthy looking high-performance model race car. As with the B6.2 version, the chassis comes with a low centre of gravity 7075-T6 motor plate that puts your motor as low as possible into the chassis cut out.

View more details & images here

September 20, 2021

RSRC hex & nut driver sets

RSRC, brand of multiple European Champion Renaud Savoya has updated their line of unique tools with new colours. The tools are now all available with a red & black handle and feature a gold 100mm long titanium nitride coated tip. The handle’s unique design ensures maximum torque and comfort and a full range is a available with hex tips available in 1.5mm, 2.0mm, 2.5mm, 2.5mm ball and 3.0mm with the nit drivers coming in 5.0mm (M2.5), 5.5mm (M3) and 7.0mm (M4).

View more detail shots here