Red RC

February 22, 2021

Reedy Zappers SG4 HV-LiPo 2S batteries

New for 2021, Reedy introduce their new Zappers SG4 HV-LiPo 2S batteries. Zappers SG4 batteries incorporate state-of-the-art LiPo chemistry with advancements in construction that result in incremental improvements in power output and internal resistance with huge gains in durability. Featuring a 3.8V/cell nominal voltage, meaning that the battery can be safely charged to 4.35V/cell. It is not a secret that more voltage equals more power, so there is no easier way to increase power and top speed than a higher charge voltage. Even when the typical 8.40V (4.2V/cell) charging limit is enforced, Zappers SG4 shine thanks to their inherently flat discharge curve, which results in higher voltage deeper into the race. Available in several configurations, including all-new 2S Slim Stick and 4S Shorty models, for a variety of on-road and off-road applications. A high quality, durable hard case helps prevent damage while embedded socket connectors keep power-robbing resistance to a minimum. Male ESC connectors are included.

View more of the new range here

February 22, 2021

Deadfly MTC2 brass & carbon options

From Deadfly come a number of new parts for the Mugen MTC2, starting with this 17g weight plate designed to fit perfectly behind the servo. Providing the perfect platform for you to mount your receiver while increasing the weight on the motor side of the chassis, it helps keep the centre of gravity as low as possible. Next up is a simple front bulkhead brace which has been machined from 2mm carbon fibre and comes supplied with the relevant hardware.

View the new products here

February 22, 2021

Ryan Maifield triple at 22nd Dirt Nitro Challenge

Ryan Maifield has completed the triple Crown at this year’s Dirt Nitro Challenge, the Mugen/JConcepts driver taking a clean sweep of all the Pro classes. Held at Thunder Alley in California, the 22nd running of the World Famous event, saw little to no foreign entries for the first time in years as Covid prevented teams traveling from abroad. In the Pro Buggy class it was TLR/JConcepts driver Dakotah Phend that would take the pole position ahead of HB Racing’s Cole Ogden. In the final, having starting from 4th, Maifield would use his vast experience as a previous multiple winner of this event, to come through and win ahead of Ogden in 2nd with Mugen driver Tanner Denney completing the podium in 3rd. Pro E Buggy again saw Phend on the pole position, but again was unable to convert his front starting spot into the win as Maifield took the overall win ahead of his JConcepts’ team mate Phend in 2nd, with the Team Associated of Spencer Rivkin bringing it home in 3rd. In the Pro Truggy it was more of the same as Phend would again capture the overall TQ but be passed by Maifield in the 45 minute final for the win, Tekno RC’s Joe Bornhorst would work his way up from the 11th place starting position to capture the final podium spot.

View the other Pro Podiums here

February 19, 2021

Pro-Line Cliffhanger high performance crawling body

Introducing the all-new Cliffhanger high performance rock crawling competition body from Pro-Line that was developed specifically for 12.3″ wheelbase Class 2 and Class 3 vehicles. Scale competition crawling is a growing part of the overall rock crawling movement and Pro-Line’s Cliffhanger body provides everything that these competitors have been asking for. It features a pinched front end and a dove-tailed rear end for maximum tire clearance while still maintaining a true-to-scale appearance and is made from a single piece of crystal-clear polycarbonate to save on weight and has a moulded-in drop-down bed to make room for you to add your favourite scale accessories. Everything on the Cliffhanger body has been optimised for maximum crawling performance while still complying with the letter and spirit of the competition crawling rules.

View more angles of the Cliffhanger here

February 19, 2021

Xray XB8 & XB8e 2021 1/8th buggies

Xray have introduced their updated for 2021 XB8 and XB8e buggy, which are both more focussed on refinement rather than major updates. The XB8 sports an updated chassis design that incorporates keyed steering posts, new fuel tank position and new mounting positions for chassis balance weights, there are also shorter 93mm rear drive shafts which improve outdrive clearance during extreme suspension travel. A new body design improves aero characteristics and making the car easier to drive with other updates including improved braking cams with an updated design for improved braking efficiency, stronger and longer conical servo saver spring has a greater adjustment range, an all-new servo saver with chassis locked posts for more secure installation and finally an all-new servo saver top deck that integrates with the new servo saver. The XB8e incorporates many of the same updates but also has a new E concept with two different layout alternatives, rear motor position with a single battery position on the left or front motor position using saddle pack batteries in the rear. A 2-piece battery holder for saddle pack layout improves balance and lowers vehicle CG while the standard battery holder is moulded from new harder material for reduced flex. Also included is two graphite servo holders, one for each motor/battery configuration as well as a compact electronics mount for speedo and receiver when using the saddle pack battery configuration.

View the full presentation of the new XB8 and XB8e on Xray’s website.

February 19, 2021

Pro-Line Slot Mag Drag Spec wheels

Pro-Line is kicking it back old-school with Slot Mag style wheels for your no-prep SC drag car. The outside ring of this wheel has a shiny, polished finish while the spoke detail is textured with a matte finish to match the look and feel of the real thing. The Slot Mag wheels were specifically made for no-prep Drag Racing and are a perfect fit with Pro-Line’s Hoosier Drag 2.2″/3.0″ rear tires and Hoosier Drag 2.2″ front tires. The Slot Mag wheels are strong and lightweight 12mm hex wheels make them the ideal choice for performance drag racing. The Slot Mag wheel offset is ideal for 2wd Slash trucks converted to no-prep Drag Racing cars and AE DR10, which has exploded in popularity.

View the Slot Mag wheels here

February 19, 2021

Pro-Line 1993 Ford Ranger crawler body

Pro-Line have introduced the officially licensed 1993 Ford Ranger Clear Body for 12.3″ wheelbase crawlers that includes extremely detailed scale moulded accessories never before seen from Pro-Line until now. Included with this body are a moulded black plastic front grill and rear taillight buckets with clear headlight and taillight lenses that allow for the addition of working 5mm LED lights and 3mm LED turn signals (sold separately). Also included are moulded plastic side-view mirrors and door handles that are scale replicas of the full-size parts off the 1993 Ford Ranger. The Cab and Bed are separate pieces for added scale realism and are made from crystal-clear polycarbonate that can be painted to match your favourite factory Ranger colour or custom painted to whatever your heart desires. Detailed decals are also provided including stickers that match the body graphics found with the STX version of this iconic pick-up truck. Pro-Line also offers a Pre-Runner Fender Flare Kit for this body that transforms your crawler into a desert running Pre-Runner.

View more images of the Ranger here

February 19, 2021

Associated RC8B3 Factory Team 92mm universals

Team Associated have introduced these optional Factory Team 92mm universals for your RC8B3 series buggy. They replace the original RC8B3 90.5mm and 93.5mm universals and will work on the front and rear end of the RC8B3, RC8B3.1 and RC8B3.2 buggies when using a 15mm rear outdrive and 17mm front outdrive. A universal joint has less mechanical bind than a CVA joint resulting in a softer suspension feel when compared to the stock 94mm CVAs. Universals will promote better handling in rough terrain and require minimal maintenance to keep performing at the highest level. Includes two 92mm universals per package.

Source: Associated [associatedelectrics.com]