From Hudy comes a new black version of their machined aluminium countersunk shims for use with M3 flat head screws. Sold in a set of 10 shims, the new black versions join the previously available silver, violet, orange and blue sets.
Source: Hudy [hudy.net]
JConcepts have released their new Heritage 21 hat which is ready to turn heads at the race track with wide selection of styles, colours and fitment. The leather patch logo sports the new diagonal JConcepts.net logo and with a bordered out design showing world championship credentials, the new logo packs a powerful punch. Available in flat-bill or rounded versions, the former comes in black or grey, while the latter comes is in black or white/grey.
Source: JConcepts [jconcepts.net]
Introducing the new XR8 Pro G2 ESC from Hobbywing, designed to work in full sensored mode at all times when it is paired with a compatible Hobbywing motor. This also allows it to utilise the Turbo Timing technology which was designed for the successful XR10 Pro series ESC used in 1/10th On-Road and Off-Road competition. This ESC can support up to 48 degrees of Boost and Turbo Timing when paired with the new G3 motors with an increase of 50% more performance over the previous G2 series motor, keeping you way ahead of the competition. Other features include built-in reverse voltage protection and real-time data logging function, to check the throttle, voltage, current, temperature, RPM and other data in real-time operational status of the ESC and motor. The ESC can be set with wirelessly with the OTA programmer and a smartphone and contains nearly 30 commonly used adjustable parameters. The Capacitor thermal protection is designed and implemented into the ESC effectively preventing capacitors from exploding and causing irreversible damage to the ESC due to overload. The built-in switch mode BEC with a maximum output of 15A and voltage adjustable from 6V to 8.4V (step: 0.1V) allows the use of various standard servos and high voltage servos.
View another image of the ESC here
OfficinaRC has just started working on some of the option parts specific to the new Mugen MTC2. The OfficinaRC 5mm ball studs are made in Italy with the highest quality TiAl6V4 Titanium to ensure the best possible product on the market, making it practically indestructible ensuring endurance and reliability. A direct replacement for the stock parts, they come in 3 versions, 8mm, 6mm & 4mm.
Source: OfficinaRC [officinarc.com]
Xray have introduced an ultra-lightweight version of the XB2 Gamma 2D body designed especially for low traction conditions. Lower weight reduces the roll of the car and improves corner speed. The profile of the body improves the stability and increases downforce towards the rear of the car to help generate more traction for the car. The high-performance, low-profile aerodynamic body for XB2D is designed to perfectly fit the car and work especially in low traction conditions. Specially designed to maximise rear down force to increase traction the front was designed to give optimal steering. The sides of the body and cockpit are as flat as possible to allow air to flow around the body for improved side stability. On the top of roof are two integrated flow channels for proper airflow. Made from high-quality premium Lexan material.
Source: Xray [teamxray.com]
New from Koswork comes these handy aluminium ride height gauges. Easily check the ride height of the your car by rotating the the triangular block to the correct setting and sliding it under the car. Each gauge has 6 different heights over the two ends and are available for 1/10th buggy (16, 17, 18mm / 19, 20, 21mm), 1/10 Truck & 1/8 Buggy (22, 23, 24mm / 25, 26, 27mm) and 1/10 SC Truck & 1/8 Buggy (25, 26, 27mm / 28, 29, 30mm). There are also additional triangular blocks available separately that can be swapped out for 1/10 Buggy Carpet (13, 14, 15mm), 1/10 SC Truck & 1/8 Buggy (28, 29, 30mm) and 1/8 Truck (37, 38, 39mm). The tool itself is made from aluminium with the stem black anodised while the blocks themselves are finished in blue with the gauge displayed in white.
Italian brand WRC Racing are teasing their upcoming entry into the 1/8th GT class with their GT4. No more information was given apart from what can be seen in the image but we will bring you full details when we get them.
Source: WRC Racing [wrc-racing.com]
The JConcepts team is back with a follow-up to their A1R touring car body, with the release of the new A2R. The new drivers body has fundamental differences necessary for performance starting straight-away in the front-end area. The shrunken front-end is considerably laid-back, shortening the nose allowing the force to be placed over the front tires. A-pillar rails extend over the hood for some air deflection straight over the nose and strengthens the front wheel well area. The front windshield is tucked back inside the rails sunk and connected to the aggressive roofline giving the A2R its distinctive shape. Behind the front wheel well and in front of the rear wheel well is a definitive edge that strengthens the openings and also provides better race posture. A hard edge runs the bottom of the rocker-panel providing more grit to the design while also providing extra front to rear rigidity.
View more details & images here
