Red RC

November 18, 2020

Exotek Racing DR10 motor plate & clamping hexes

More new options for the DR10 from Exotek Racing who have produced a new motor plate and clamping hexes. Starting with the vented motor plate which features aggressive slot cuts for less weight that also helps lower the motor temps faster. The extra machining brings the weight down to 13grams (7grams lighter than stock) but the critical motor mounting areas are still intact to minimise flex for solid motor mounting and gear mesh. The precision machined heavy duty alloy rear clamping hex set has looser steel cross pin tolerance to allow you to tighten the wheel nuts without binding the bearings. The hexes do not lock onto the bearings, unlike the stock plastic hexes. They use heavy duty M2 alloy steel screws for the clamping.

View the hexes here

November 17, 2020

Team Associated RC8B3 44/13 gear set

Back by popular demand, the Team Associated RC8B3 44T ring gear and 13T pinion gear have returned as a combined packaged to include both gears as a set. Used as a tuning option in RC8B3 V3 differentials, the 44/13 gearing has a lower gear ratio for more top end speed over the 42/12 gear set.

Source: Team Associated [associatedelectrics.com]

November 17, 2020

Schumacher team up with Markus Mobers

Schumacher Racing have added legendary German LMP12 Racer Markus Mobers to their team. Markus has been running with the Double World Championship winning Eclipse 3 for some time, but the UK are pleased this is now a permanent arrangement for future races. Markus brings a vast amount of experience and knowledge to the team, and we wish him well for future events when we can enjoy them again.

Source: Schumacher [racing-cars.com]

November 17, 2020

Xceed Allen wrench combo set

Xceed have introduced a design update to their range of tools, with a new handle shape and colourway. Previously coming in anodised green as a base colour together with a machined raw aluminium colour, the new design uses gun metal grey as a base and features green highlights. The handle is now lighter due to additional holes, and the centre core of the handle has also gone on a diet resulting in a comfortable and lighter feeling. The tool tips themselves remain the same, made from HSS, and the tools will be available individually or as sets like this Allen wrench combo set, which includes a 1.5mm, 2.0mm, 2.5mm & 3.0mm.

Source: Xceed [xceedrc.com]

November 17, 2020

Scorpion multi-bit hex driver

Scorpion have released their convenient and versatile new multi-bit hex driver as part of their high performance tool line. This single tool contains 4 different hex sizes, 1.5mm, 2mm, 2.5mm & 3mm, plus it has an adjustable shaft length for compact storage and use, as well as extended use for those hard to reach bolts. With Scorpion’s hollow core design, and knurled grip surface, you have an ultra lightweight tool with fantastic grip and feeling in the hand. When you pop the top off you then have access to the 4 x tool tip holder and your choice of hardened steel hex driver tips. If the tool in the short configuration is not long enough, then pull up on the locking latch and the tool extends to a locked longer position, no other tools needed for adjustment. When you are finished the tool easily retracts back to its original configuration, and the tool tips magnetically slide back into the tool tip holder.

View more images of the tool here

November 17, 2020

Onisiki 120A Limited Edition brushless ESC

Onisiki have announced an update to their Hellblaze ESC. This new limited edition version has been revamped to provide a smoother throttle response and added adjustable timing to suit different tracks. Rated at 120A, it is more than you will ever need in drifting and this will keep performance consistent throughout the run. The ESC sports Onisiki’s signature markings that match their other accessories such as fans, gyros and capacitors.

Source: Onisiki [facebook.com]

November 17, 2020

Samix Capra brass knuckle

New from Samix for the Capra, is this black coated brass knuckle. Weighing in at 56g per side, they provide improved centre or gravity and forward weight bias for climbing. Additionally they offer better durability and rigidity over the factory plastic parts and like the other Samix parts they are a direct fit. Made of high quality brass and black coated to help prevent corrosion, they are etched with L and R for ease of installation.

Source: Samix [rcsamix.com]

November 16, 2020

Element RC Trailrunner 4×4 with Fire body

Element RC’s Trailrunner 4×4 is now available in a red/orange, a colour the company refers to as ‘Fire’. The body and chassis remain unchanged, with the new colour body made from a high-strength polycarbonate that has been pre-painted to look fresh from the dealer showroom. Designed for looks, function and customisation, it features a two-piece design with removable front lower valance, injection-moulded fender flares, B-pillar appliqués, door handles, windshield wipers, mirrors and front grill installed right out of the box. Also included are injection-moulded roof rack, three-piece front bumper with D-rings, snorkel and accessory decal sheet.

Source: Associated Electrics [associatedelectrics.com]