Red RC

July 4, 2024

Team CRC 1:12 Onroad kit – coming soon

With America celebrating Independence day today (4th July), 1:12 World Champion chassis manufacturer CRC based in Oneida County, New York, has released some information and low res images in relation to their new 1:12 car kit which it states will ‘be available soon’. The images are of the car that dominated the 2024 Snowbird and Canadian Nationals. CRC posted, ‘After many race weekends on the road this past season testing and refining with the team, the result is a fast, simple, lightweight, durable and affordable race car that has already won major championships. More information will trickle out soon.’ Founded by Frank Calandra Jr in 1993, Team CRC are also making the full switch to metric measurement, saying ‘Keep an eye out for the new 𝗠𝗲𝘁𝗿𝗶𝗖𝗞𝘀 (metric hardware CRC Carpet Knife® pronounced “meh-tricks”) 1/12th race car from Team CRC.’ Highlights of the new car include, ‘Ultra-tune’ front end with easy set-up front wedges (caster/camber geometry pieces), vented king pin for greater damping fluid volume and continuous lubrication, and Low CG thanks to ballast placement just 3mm above race surface but same level as chassis. The complete kit with standard racing equipment will come in 60-90 grams under minimum weight.

Source: Calandra Racing Concepts [Facebook]

July 4, 2024

Schumacher LD3 | ST2 V2 Pivot Block and 5 Deg Yokes

Schumacher has released two updated ‘V2’ versions of popular items for their LD3 2WD Buggy and ST2 2WD Truck. A new V2 version brass pivot block becomes the heaviest of the optional blocks in the material now weighing 30 grams rather than the original 40 grams. V2 Alloy 5 Deg yokes increase durability over the plastic kit version and include adjustable lock stop screw, which can accurately enable you to set steering lock.

View more images here

July 4, 2024

JConcepts RC10B7 servo mount bracket

JConcepts has introduced a new servo mount bracket for Team Associated’s RC10B7 line of vehicles. Constructed of lightweight aluminium, the simple and sleek design with performance and tracking advantages have spoken volumes throughout the years on the racetrack. Setting the trim on any RC car is crucial but perhaps even more critical is for the trim to remain consistent throughout a race. The mount fits snug inside the chassis servo mounting area increasing the support while the 2 screw mounting locations are beefy in design and zeroed in for a direct mount to the chassis. The brace has locations on each side for included set screws to help align and maintain servo position during racing conditions, crashes, and hard hits. The set screws are intended to touch-off against the servo case and provide additional support retaining the servo in the intended position which helps maintain consistent steering trim.

View mounted in buggy here

July 4, 2024

Excelerate RC Prodigy 12 1:12 – Final Prototype

Josh Cyrul, one of America’s most experienced electric onroad racers and an accomplished car designer, has posted on his social media images of the new Excelerate RC Prodigy 12 1:12 chassis he has penned. In the post Cyrul explains, “This is the final prototype fitting of parts so some of the anodize colors are being switched around as well as the shapes and fit of a few parts but everything is in production with a good portion of production already finished. I’m sure people will say it’s a copy… Until you flip it over and realize it’s for sure not. A huge % of this car is actually based off cars I drove and started designing in the mid-late 90’s. From the my heavily modified Corally F1 car to the TQ Eagle of the early 90’s and all the hand dremal’d garage experiments along the way, this one is a heavy mix of concepts I’ve tried and really wanted to put together into a singular package. Steep learning curve ahead as we learn setups for various races and carpets but I’m pretty happy with the foundation we have to work with. More details coming soon…” The multiple ROAR National Champion finished up by announcing that he is also working on a second Excelerate RC chassis release saying, ‘Oh yeah, and if you think this is cool…. Just wait until you see the F1 car coming next!!”

View more images here

July 3, 2024

Avid B7 Parts

American aftermarket parts producer Avid Racing Concepts has released a huge offering of parts for the Team Associated RC10B7 1:10 2WD Buggy platform. All direct replacement parts and finished in Avid’s signature black and silver style, this batch of parts not only adds style to your B7, but much needed strength. Included in it are a 7075-T6 Aluminium Motor Mount, a One-Piece Servo Mount, and a 0° Bulkhead with 4 tapped holes with set screws to remove any slop through wear. A new Rear Ball Stud Mount raises the ball stud +2mm so you don’t have to run as many ball stud washers, keeping your ball stud bent free. Their Arm Mount D HD is beefed up on the sides for extra strength. In addition to the visual parts, Avid are also offering a range of hardened hinge pins.

View more parts here

July 3, 2024

2025 Charity Race – Announcement

Having raised thousands of euros for local charities since its inception, the organisers of the annual Charity Race in Italy has announced a new earlier date for the 2025 edition of the popular Electric Touring Car event. Organised each year by ASD Team La Gang, the Charity Race will take place on January 11/12 at the RC Landia indoor carpet track in Scandiano. Having clashed with the legendary TITC in Bangkok, Thailand, this year, the earlier running of the 2025 edition should boost the number of factory drivers in attendance. Schumacher’s Michal Orlowski has won the past two editions of the race which over the years since beginning in 2010 counts reigning World Champion Bruno Coelho and former Champions Marc Rheinard, Ronald Volker and Alexander Hagberg among its winners. The club are always keen to highlight the main goal of the race stating, ‘Remember, this race is all about giving back! All proceeds will be donated to support children in need. Join us for a fun-filled weekend of racing while making a positive impact on the lives of these youngsters.’

Source: Team La Gang [teamlagang.it]

July 3, 2024

MXLR Xpress FlexBumper

In it latest FlexBumper release, Germany’s MXLR is now offering Xpress Touring Car owners the opportunity to run the 3D printed bumper. Produced using thermoplastic polyurethane for optimal strength and flexibility, the FlexBumper absorbs hits better and doesn’t transfer them as much into the chassis structure. More robust and sturdy, it always goes back to original shape and don’t drag on the floor after a crash. The MXLR FlexBumper for the AT1, AT1S, XQ1, XQ10, XQ10R, XQ11, XQ1S, XQ2S, XQ3S matches the original footprint, but with a lower overall profile! It’s a direct replacement for the kit foam. The lower overall profile helps to keep the weight in an acceptable range with it coming in at 9.8grams.

View more images here

July 2, 2024

Reds Racing Tetra-X Clutch System

REDS Racing has unveiled its latest innovation, the new Tetra-X™ Clutch System. This state-of-the-art clutch system has been meticulously engineered to provide superior performance, ease of use, and unmatched durability, ensuring that racers can achieve their best results on the track. One of the most significant advancements in the new clutch is its user-friendly design, the clutch also coming pre-assembled. Racers no longer need to rely on specific tools or complicated procedures to adjust the clutch and it can be easily assembled and set without any tools, allowing for quick and hassle-free setup. The new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.

View more images here