Red RC

October 9, 2020

SWorkz aluminium wing plate

Made by RC-Project for SWorkz is this aluminium wing plate. Machined from 7075 T6 aluminium with a thickness of 3mm it has been anodised and laser etched with the SWorkz logo. A very lightweight option part that will help to support the wing in case of violent impacts, avoiding unpleasant deformations or having the wing ripped from the mounts. Thanks to the mounting hole slots it can be mounted on all 1/8 buggy models using the included 2 washers.

Source: MW RC Cars [mwrccars.at]

October 9, 2020

Rebellion RC MMX topdeck option

Rebellion RC now offer two more top deck options for the Awesomatix MMX, a single and two-piece version. Both are very similar in design, wrapping around the spur gear, with the single piece best suited for high to very high traction, while the two piece top deck helps improve front end in-corner steering depending on which screws you use. All bulkhead-holes are 3,1mm to improve flex and reduce tweak, and both are available in 1.5mm or 2mm thick carbon.

Source: RC-Carbonstore [rc-carbonstore.com]

October 8, 2020

SWorkz add Callum Niblett to their team

SWorkz have announced the signing of UK driver Callum Niblett to their team. Callum will race their 1/8 Nitro and Electric platforms going forward cars in the next years. European Team Manager Jerome Sartel said ‘We are really happy to have Callum Niblett in our European Team. I am sure he will make his way and fits perfectly into our team’. Callum also added ‘It’s really awesome to be part of this successful team. After testing the SWorkz cars the decision to run them in the future was easy.’

Source: MW RC Cars [mwrccars.at]

October 8, 2020

Team Associated CR12 Tioga white & blue

Team Associated have announced the release of another colourway for their RTR CR12 Tioga scale crawler. This new version adds some flair over the standard white previously available with white and blue graphics. The CR12 chassis and shell itself remains exactly the same as what was previously available

Source: Team Associated [teamassociated.com]

October 8, 2020

WRC SBXE.1 1/8th offroad EP buggy

After thorough testing WRC have introduced the all-new SBXE.1 1/8th electric off-road buggy. Based on SBX.1, the buggy is built on a 7075-T6 aluminium chassis that is designed to adapt the vehicle to a wide range of track conditions. The drivetrain is equipped with CVD driveshafts throughout and is provided with three differentials with hardened lightweight outdrives. WRC adopted a new pivot ball front steering knuckle setup that allows for a wide range of adjustments including caster, camber, upper roll centre, bump steering as well as track width. Front and rear arms are side to side interchangeable, and it is possible to choose three different hardness material for each. The rear hubs are designed to allow a variety of upper camber link positions and allow the adjustment of the upper and lower roll centre, camber gain and more. Other features include the front and rear aluminium 7075-T6 shock towers and the shock absorbers are big bore type.

View lots more images here

October 8, 2020

Ultimate Racing range of pliers

Ultimate Racing are pleased to present three new additions to their expanding range of tools, a ball link pliers, a needle nose pliers and a wire cutting pliers. The ball link pliers are for removing and installing ball links without damaging the balls or links. The curved tip allows for easy access to hard to reach links and they also have a slot to grasp and hold the link rods while installing or adjusting the links. The needle nose pliers, with side cutters can be used for cutting, shaping, bending and gripping a variety of materials including wire and other light duty applications. Finally the wire cutter pliers are great for when you need to make an accurate cut in a tight space. Perfect for soft wires, plastics, and other light materials.

View the remaining pliers here

October 8, 2020

Blitz Roadster 1/10th 190mm TC shell

Introducing the all-new Blitz Roadster 1/10th scale 190mm touring car body shell. Incorporating the latest low-profile design elements, this high-downforce design delivers superior balance for fast and consistent lap times. Marking lines are moulded into the body for easy mounting, while the sculpted rear wing features two different cut lines to fine tune the level of rear downforce, and the 20mm x 40mm side dams are also included. The body is available in 0.5mm light and 0.7mm standard thickness that’s been optimised for ETS weight rules and each body comes with high quality window masks, light decals and wing mounting hardware.

View another angle of the Roadster here

October 8, 2020

Kingmax K8S high torque servo

Kingmax have introduced their new K8S servo, complete with monster torque and stainless steel gears. Created using a brand new patented gear chain structure that gives it as high as 85kg/cm (continuous torque: 43.6kg/cm) of torque at 8.4V with super smooth delivery. To handle such torque the servo has an all metal casing and even the servo horn is of a super beefy metal construction.

Source: Kingmax [kingmaxhobby.com]