Red RC

October 6, 2020

Traxxas heavy duty CVDs for the Hoss 4×4

For the Hoss 4×4, Traxxas have produced these new heavy-duty steel constant velocity driveshafts. Designed specifically for monster truck applications, they are built to withstand the brutal torque and massive grip produced by the Hoss’ 540XL motor and huge Sledgehammer tires. Compared to ordinary metal shafts, Traxxas’ unique splined telescoping design delivers full-range articulation so there is never a need to limit suspension travel. Metal pin-retention rings keep the drive pins securely in place for extra security on high RPM speed runs. Also suitable for Slash 4×4, Rustler 4×4, and Stampede 4×4 models.

Source: Traxxas [traxxas.com]

October 6, 2020

Lex Tyler takes 17.5 class victory at Cencal Challenge

The 5th Annual Cencal Challenge was held in Fresno, California this past weekend and with 135 entries it was the biggest race for outdoor racing of 2020. The racing format set to Rocket Round and Triple Mains for each class. In the 17.5 TC division, Jaron Bandy took the top qualifying spot ahead of Xray driver Lex Tyler in 2nd with EJ Evans (Awesomatix) ending up qualifying in P3. Lex Tyler was able to clinch the overall win with victory in A1 and A2 meaning he would site out A3. EJ Evans would claim the runner up spot while TQ man Bandy would have to settle for 3rd.

Source: Xray [teamxray.com]

October 6, 2020

Yeah Racing Capra brass portal covers

Yeah Racing have released these new brass portal covers for the Currie axle on Axial’s Capra 1.9 Unlimited trail buggy. Weighing in at 56 grams each, these not only look great but will ensure you extract more grip from your tires by putting all that extra weight at the lowest point of the vehicle.

View another image of the portal cover here

October 6, 2020

LCG Racing T4’20 SFX Conversion chassis

LCG Racing have introduced this new aluminium chassis for the Xray T4 2020 SFX Conversion which features a stepped decrease of cutout width from front to rear. This makes the chassis softer in the front and stiffer in the rear which they claim makes the car smoother at corner entry and more stable on power while increasing steering through the corner. The chassis is designed with reduced width at the droop screw area to decrease scrubbing and, therefore, increase corner speed and only includes long suspension arm holes to improve strength and optimise flex characteristics. The black anodised aluminium chassis is made from high quality 7075 Aluminium and comes laser engraved with the LCG and SFX logos.

Source: LCG Racing [facebook.com]

October 5, 2020

Infinity 5×10 clutch shim set

Creation Model have introduced this new 5×10 shim set for their line of gas powered cars. This shim set is mainly used to adjust the clutch clearance and the 5.1 x 9.8mm shims come in 0.1, 0.2, 0.3mm thicknesses, with ten pieces of each included. The set also comes with a decal for use on the Infinity small-parts box that was released some weeks ago.

Source: Creation Model [creationmodel.net]

October 5, 2020

Burak Kilick double at Messe(Statt)-Cup Leipzig

This year’s Messse(Statt)-Cup Leipzig, normally held indoors as part of the Modell Hobby Spiel fair, was this year taken outdoors as the Corona virus restrictions meant the original plan couldn’t go ahead. Thankfully the weather was good and the 3-day event hosted by MRC Leipzig went ahead without any problems. Qualifying in 1/8th Nitro saw Burak Kilic (Mugen) take the top spot ahead of Aaron Rönick (Associated) and Johannes Klett, while in EP Buggy, it was again Burak, this time ahead of Sophie Müller (Sworkz) and Steve Krause (Kyosho). The top 3 in EP remained the same after the three 10 minute mains with Burak taking the win ahead of Sophie and Steve. In the 30 minute Nitro final Burak Kilic was again the person to beat and he was joined at the front by his brother Berkan (Mugen), the pairing winning their respective semi finals to line up first and second. Burak would win by under a lap over his brother Berkan with Aaron Rönick completing the podium in 3rd.

Thanks to Abdullah Kilic for the report

October 5, 2020

Mihelic is 2020 Austrian National 1/8th onroad champion

This past weekend the final round of the Austrian 1/8th IC championship took place at the beautiful Morac-Ring. In the low grip conditions it was Xray driver Nejc Mihelic who took the TQ followed by Herfried Pucher and Tobias Sutrich. In the very even superpole battle it was Tobias who joined Mihelic as the direct qualifier in the finals. Having found a reliable and fast setup in the direct finalist training Mihelic set with the fastest lap of the weekend on his way to another win in front of Herfried Pucher and Patrick Schweinzer. The result ensured Nejc Mihelic was crowned Austrian champion, followed by Herfried Pucher and Leonardo Varga.

Source: Xray [teamxray.com]

October 5, 2020

Max Gotzl takes Rd5 & overall Czech Open series

The 5th and final round of the Czech Open series 2020 took place last weekend at the RC Klub Kolin track. The weather forecast was very promising for the race and we had nice sun all day, but the heavy rains in the days leading up to the event made the track wet even for the race, so there were no problems with dust or low traction. In Nitro Max Gotzl managed to take the TQ with the fastest time in qualifying with his Xray XB8, with Jiri Mara (Sworkz) placed 2nd and Jan Horacek 3rd. In the Ebuggy class Jiri Benes took the TQ in front of Jiri Dvorak and Jan Domansky. The start of the 30 minute main final got off to a rough start for pole sitter Gotzl as he made a mistake on the opening lap, but a few laps later he was able to pass Jiri and finish the race in first place with a comfortable gap. Mara took the runner up spot with Jan Hujer finished 3rd overall. In Ebuggy the top 3 after qualifying had the exact same points after the three finals, but Jiri Dvorak with a faster time took the Win in front of Jiri Benes, and Jan finished 3rd.

Continue reading the report here