February 1, 2024
…conceived from years of testing and development. It is designed to be used for multi-purpose purposes on dirt, carpet and astro road surfaces. The slim aluminium chassis provide exceptional precision and stability when jumping and cornering with the kit including front and rear stabiliser, highly adjustable gear differential and 13mm shocks. The design of the rear suspension is unique and adjustable than other vehicles in this class. The height of the deferential is adjustable, giving you quick and easy access to the deferential. MSB1 kit also includes cab forward body shell, front wing and rear wing. Source: Mugen Seiki [mugenseiki.com]…
January 31, 2024
New from T-works is this tyre gluing tool intended for 1:8 Offroad use. Available in two models, one for buggy and one for truggy, it is made from aluminium and can be adjusted for precise gluing of different tyres types. With a 2mm hex you can adjust the push wheel that opens the tyre wall for the application of glue. The height of the wheel can be adjusted using 3 included 1mm shims and with a 1.5mm hex you can also adjust the angle of the push wheel. The unit comes complete with its own carry case. Source: T-Works [rc-tworks.com]…
January 31, 2024
…speed is improved a lot with these hard compound suspension parts. The front upper arm holder of R8.4LCG is 1.2mm higher compared with R8.4, it changes the roll centre in the front end and makes the car have quicker response handling and less exit steering, it can avoid over steering especially when applying throttle. Finally, the rear upper arm plate also becomes a new one, the horizontal plate has 3 positions to adjust, more inside gives more rear traction and more stable handling, and more outside position will give a quicker response to follow the front end. Source: ARC [arc-rc.com.tw]…
January 31, 2024
…blinky classes where big pinions are a must. For the 2mm RS-W Split Front Top Deck is RS Split Rear Top Deck they have refined the shape of the top deck with a thinner cutout for more consistent flex characteristics. For the front they added a thinner W-shaped cross brace to control the flex to give improved steering feel. This cross brace can be cut to further smoothen out the steering if required. For the rear added their trademark V-shaped cross brace for slightly more flex than the stock split top deck for improved corner speed. Source: Smokem Racing [smokem-racing.com]…
January 30, 2024
New from reigning European 1:8 Buggy Champion engine brand Reds Racing is the 721 Superveloce Pro Gen4. It comes with a redesigned cooling head which boasts the advantages of a lower centre of gravity for enhanced car handling, improved aerodynamics for reduced drag, and superior engine cooling. Furthermore, the new bicolor cooling head features a unique design. The new engine also comes with a new High protection Double seal front bearing for increased durability and idle stability. Other main Features of the Superveloce engine is that it boasts an Extra Tuned Sleeve by Mario Rossi. This special modification to the…
January 30, 2024
…stop function. When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. This function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. XeRun XR10 Justock G3S Specification Size – 40.9X33.9X32.1mm Weigh – 75.4g(w/Wires) Cont./Peak Current – 60A/380A Input Voltage – 2S Lipo BEC Output – 6V/7.4V @4A Input Wires – Black-14AWG-200mm*1 Red-14AWG-200mm*1 Output Wires – Black-14AWG-200mm*1 Black-14AWG-200mm*1 Black-14AWG-200mm*1 Fan Size – 25*25*10mm Output Wires – 5-7.4V Input Connectors – BEC Source: Hobbywing [hobbywing.com]…
January 29, 2024
…bling? US racing upgrade parts producer Klinik RC has released a rainbow of different colour finish Titanium Turnbuckles for Team Associated’s new RC10 B7 2WD buggy platform. Machined from titanium, in addition to lowering weight and increasing durability a range of 13 different colours give plenty of scope for a personalised bling look for your buggy. Supplied as a set of set and available in a more traditional silver raw finish, you can also choose between shiny blue, gold, purple, bronze, or a matte finish grey, blue, gold purple as well as a green and rainbow. Source: Klinik RC [klinikrc.com]…
January 29, 2024
New from T-Works are these Dual Ball Bearing Front Driveshafts intended for use on Xray’s X4’24 and X4F ’24 1:10 Electric Touring Cars. The 48.5mm driveshafts feature a heavy duty coupler with ball bearings providing a smoother motion especially on maximum steering. The second set of bearings on each shaft controls the motion from suspension movement. Source: T-Works [rc-tworks.com]…
