From Creation Model, come these titanium M4x10mm UFO head screws. Sold in a set of 6 pieces, the design and material used offers a lightweight design while maintaining sufficient contact surface area.
Source: Creation Model [creationmodel.net]
Revolution Design have released this hard front anti-roll bar set for the T6.2 & SC6.2 (1.5/1.6/1.7mm). Although today’s stadium and short course trucks are based on low-centre-of-gravity platforms, available options still focus on dirt tracks. As a consequence, racers are either to improvise or will be unable to unlock their trucks’ full potential on high-grip surfaces. With their wide front tires, trucks can be a handful on carpet and Astroturf, because the anti-roll bars on the market are not up to the task of taming down your front end, until now that is. RDRP has come up with a set of three anti-roll bars with high-grip racetracks in mind. Available at an economic price, this is a welcome option for everyone racing an Associated 6 series truck on carpet or Astroturf.
For the Awesomatix A12, RC Maker have produced some LCG weights and a GeoCarbon Bumper brace. The GeoCarbon bumper mount is made from 2mm carbon and helps secure the bumper firmly with the supplied plastic supports. This provides a nice platform for the body to sit on, as well as supporting the bumper at the same time. In terms of weights, there is a brass LCG Front Weight (10g) that replaces the AM1206 for increased weight at the front of the car. This makes the car less responsive and easier to drive. There are also brass LCG rear weights (6.5g ea) that attach to the rear of the chassis and increase the unsprung weight at the rear of the car. This increases the cars rotation, particularly handy for very tight tracks.
Avid have announced the release of this chassis brace support tuning set for the TLR 22X-4. Designed to make the TLR 22X-4 steering more predictable to drive while providing more confidence, it does so by stiffening the front end with a thick 3.5mm carbon brace and softening the rear with a 1.5mm carbon brace. The set comes with a pair of 1.0mm shims to maintain rear chassis and gearbox gap.
Source: Avid [avidrc.com]
Made for all crawler enthusiast are these Ruddog Crawler brushed motors, which are now also available in 550-size. Coming in 5-slot specification and two different winding variants, 10T & 15T, the dual ball-raced motors feature adjustable timing, plated end bells, replaceable motor brushes and springs, brush heatsink towers and they are fully rebuildable if needed. The adjustable timing allows to adapt and optimise the motors for drivetrains that require reverse motor rotation operation.
Source: Ruddog [ruddog.eu]
This stylish Hudy hard case has been designed specially for the Sanwa MT4, MT44 & M17 transmitters. Made from the highest-quality materials, combined with expert workmanship, ensure the durability and long life of this hard case. The upper lid features inner net pocket with a zipper while outside sports a stylish and cool design with full-colour Hudy graphics. Size 185x220x145mm.
Source: Hudy [hudy.net]
Introducing the new Core RC Hi Response long springs for offroad buggies. Developed by Schumacher engineers and high level drivers over a wide range of conditions, from low grip dirt to high grip carpet, these springs have been made to improve the responsiveness of the cars, compared to the alternative Core RC and Schumacher big bore springs. They feature less coils and have a thinner wire diameter and they also offer a handy weight saving, by an average 4 grams per pair over previous Core RC Springs. For use on the rear of the Cougar Laydown, Cat L1 Evo and other cars using big bore shocks. Available individually in red (2.0 lb/in), green (2.2 lb/in), blue (2.4 lb/in) and black (2.6 lb/in) or as a complete set of all four.
Source: Schumacher [racing-cars.com]
Contact have announced that their recently released LMP12 wheels are now available separately, unmounted. The available range of wheels includes the new hex fitting wheel for the Eclipse 4, front wheel as well as the standard 3 bolt rear wheel. The wheels are supplied pre-scratched for better glue adhesion.
View the other available wheels here
