Red RC

July 27, 2020

Xray GTX8 150cc carbon fibre fuel tank guard

Coming from Xray and made for the 150cc fuel tank of the GTX8 1/8th nitro GT kit is a carbon fibre guard set. Machined from high-quality carbon fibre the guard protects the fuel tank from heat, ensuring more consistent engine performance and less tank swelling which can lead to problems during tech inspection due a to too fuel system volume. In addition the strong graphite material adds protection agains stones and debris. Included the carbon fibre guard comes mounting hardware.

View another image here

July 27, 2020

Martin Bayer crowned Austrian E-Buggy Champion

The single-round Austrian 1/8th Electric Championship was hosted by the CMBF Süd Ost club in Salsach, Austria this past weekend, attracting nearly 60 entries. Jürgen Trieb, Martin Bayer and Micha Widmaier would battle for the overall TQ with the better end for Jürgen who won two of the four qualifying rounds while Martin and Micha shared a TQ each. The triple 10-minute A-main saw Martin taking A1 from Max Götzl in 2nd and Hupo Hönigl in 3rd and also A2 would go to Xray’s Martin Bayer who thus took the overall championship early while Micha Widmaier (SWorkz) and Max Götzl (Xray) came in 2nd and 3rd in A2. A3 would then decide over the remaining podium spots with Micha cementing his overall runner-up position with a win in the final A-main as Martin Bayer and Max Götzl came in 2nd and 3rd respectively. Ultimately and behind Martin and Micha it was Max Götzl with the final podium spot from Hupo Hönigl in 4th and Marcel Trieb in 5th.

Image: Xray [teamxray.com]

July 24, 2020

Bittydesign Vision XB8 buggy body shell

The latest vehicle to receive Bittydesign’s Vision body shell treatment is Xray’s popular XB8’20 1/8th scale buggy. The lid’s design will offer an easier to drive and more balanced feeling thanks to a futuristic cabin, side pod and rear side flaps shape that optimises the aerodynamic characteristics. In addition a flap behind the engine area guides the air towards the rear wing for a smoother and more directed airflow around the shock tower and lower wing mount. The body comes moulded from high-quality 1mm Lexan polycarbonate and precision laser pre-cut to fit the XB8 2020 specification kit. The package is rounded out by a pre-cut decal sheet as well as window masks.

View more images here

July 24, 2020

FTX Torro Brushed EP 1/10th RTR trophy truck

New from FTX is the semi-scale Torro 4WD desert trophy truck. Featuring trailing link rear suspension just like the desert trophy trucks racing in the New Mexico deserts, the Torro is ideal for any fan of extreme trucks. For something a little different FTX have added a bit of colour to the Torro EP, with some blue moulded suspension parts and roll cage accessories, just to liven things up a little instead of bland old black. The full featured brushed truck is a perfect entry in to 1/10th scale RC and includes a 60A speed control, Etronix radio system and Voltz 1800mAh battery pack. Other features include blue anodised aluminium shock absorbers front and rear, metal differential and crown gears and sealed 4WD shaft drive transmission. The truck will hit stores in mid-August.

View a list of the features and more images here

July 24, 2020

MiBorg RCV electric touring car driveshafts

French company MiBorg has introduced their new RCV real constant velocity driveshafts for electric touring cars. Utilising the design of full-scale cars the driveshafts use steel balls instead of cross pins to drive the wheel axle, which results in less vibration even at high steering angles. This leads to a more predictable handling, higher corner speeds and less tyre wear. In addition the wheel axles allow the use of standard thickness bearings while lighter, pin-less wheel hex adapters reduce overall weight. The patent pending driveshafts are available for many of today’s electric touring car kits.

View another image here

July 24, 2020

Infinity IF14-2 aluminium super flex chassis

Coming from Creation Model and made for the Infinity IF14-2 electric touring car is an aluminium super flex chassis. The main plate is machined from high-quality 2.0mm aluminium and it offers greatly increased torsional flex characteristics thanks to excessive milling, resulting in improved handling and traction in low-bite carpet or medium-high traction outdoor asphalt track conditions. In addition the chassis is about 7g lighter than the standard flex chassis. The part comes black anodised and laser-engraved for surface protection and looks.

View more images here

July 24, 2020

Xray XB2’20 graphite composite rear roll centre holder

Coming from Xray and made for the XB2’20 2WD buggy is a new graphite composite rear roll centre holder. Designed for the use with the LCG gearbox the ball stud mount features updated roll centre positions while also acting as the rear anti-roll bar mount. The part fits both the Dirt and Carpet Edition kits with the reinforced graphite material being both lightweight and strong.

View another image here

July 24, 2020

Rêve D SPM titanium long neck ball stud

Rêve D have introduced their new Super Precision Machine Cut series long neck ball stud. The part is ideal for all drift cars that use sliding steering racks and a lot of spacers for Ackermann adjustment. The narrow neck design allows for increased ball stud motion while the polished surfaces ensures smooth steering and suspension action while adding shine to any chassis.

Source: Rêve D [teamreved.com]