Red RC

July 11, 2024

1:5 Large Scale FEMCA International – Announcement

New South Wales Radio Control Racing Car Club has announced the inaugural running of the 1:5 Large Scale FEMCA International at the John Grant Raceway in Sydney on October 23rd to 27th. The club, which did a superb job of hosting the 1:8 GT World Championships last year, was due to host this year’s IFMAR Large Scale World Championship however due to low numbers of entries the race was cancelled. A major disappointment for the Asian Large Scale scene, the club approached FEMCA with the idea that with all the fantastic tracks located throughout the Asia/Pacific that they would try to build 1:5 scale throughout the region, and allow their side of the world to travel to a championships with a lot less cost. Making use of the racing facilities throughout the Asia/Pacific that would only otherwise be chosen on the IFMAR rotation cycle, and, as shown over the past 14 years then get underutilised as the European countries due to cost etc. As a result NSWRCRCC will host the inaugural 1:5 FEMCA International at its track on the week the Worlds was due to be held, providing all competitors who booked tickets/ accommodation a big race meeting.

Continue reading here

July 10, 2024

OfficinaRC Mi9 Titanium Screw Kits

OfficinaRC has introduced nine titanium screw kits specifically designed for the Schumacher Mi9 1:10 Electric Touring Car. Four of these kits are dedicated to the upper part of the model and are offered in two variations: UFS and Skinny UFS. UFS is renowned for its robust look and strength while the new Skinny UFS has smaller head sizes to weigh the same or less than aluminium screws of the same length (approximately 10-30% less than UFS depending on the length). Additionally, there is a lower part kit made of SFS with all OfficinaRC screws crafted in Italy from top-quality certified materials.

View kit options here

July 10, 2024

Lugz Racing ‘Intimidator’z’ 1:10 Offroad Carpet tyre

Based in Northern California, Lugz Racing has announced the upcoming addition of a 1:10 offroad carpet tyre to its range it is calling ‘Intimidator’z’. Available for both 2WD and 4WD, the rear tyre has a small/medium size lug designed for predictable & consistent long lasting tractions. The newly designed extra low profile front tyre is designed with two different sidewall configurations to utilise depending on the amount of steering and aggressiveness required.

Source: Lugz Racing [lugzracing.com]

July 10, 2024

Factory Team RC10B7 Battery Mount Set

Team Associated’s Factory Team brand has released an upgrade Battery Mount Set for the RC10B7 1:10 2WD Buggy. The set replaces the plastic kit parts with carbon fiber and blue anodised aluminium for a factory look. Screen-printed markings clearly show battery positions and offset direction. Both standard and low-profile standoffs are included to accommodate different battery thicknesses.

Source: Associated [associatedelectrics.com]

July 9, 2024

Tekno RC NB48 2.2 1:8 Nitro Buggy

Tekno RC has announced the release of its latest 1:8 Nitro buggy, the NB48 2.2. Following more than two years of rigorous testing and development on tracks across the world, this is the seventh revision of the NB48 series. Leveraging valuable feedback from team drivers and customers, the NB48 2.2 has already proven its potential by clinching the 2024 ROAR 1:8 Fuel Off-Road Nationals and securing podium finishes in seven out of the past ten major US 1:8 events. Key enhancements include the new flex-tuned split design 7075 CNC machined shock towers, which significantly improve traction and predictability, and the new 93.5mm rear universal drive shafts that boost stability and support. Other notable features of the NB48 2.2 include precision molded shock pistons and guides that minimise internal friction for better bump handling, and reduced ackermann spindle plates that provide smooth, predictable steering with enhanced mid-corner wheel support.

Continue reading here

July 9, 2024

1:10 Nitro Touring Worlds in Costa Rica – CANCELLED

The IFMAR 1:10 Nitro Touring Car World Championship which was due to be staged in Costa Rica in November has been cancelled. In the last few hours FAMAR informed the World governing body, IFMAR, that due to issues surrounding noise from the track effecting local residences that the government will not permit the running of the event. Red RC was aware of the noise issues but was informed that host club ADDAP had planned to build a sound barrier wall after concerns were raised about the high noise levels for the duration of the Worlds. IFMAR is now scrambling to seek an alternative host so the 10th running of the Worlds for the category can hopefully still go ahead this year. As the last host of the 1:10 Nitro Touring Car World Championship in Thailand in 2022, the FEMCA Blok has been offered the opportunity to host it again but with the date only 5-months out this could be a challenging time frame for any tracks interested. It has been a very challenging 2024 for IFMAR, first with the 1:8 Offroad Worlds in Brazil being cancelled before being moving to Spain and then last week the Large Scale Worlds in Australia was cancelled.

View IFMAR statement on cancellation here

July 9, 2024

JConcepts Silent Speed 540 35T Motor

A new addition to its offering of Silent Speed brushed motors, JConcepts has added a 540 35T brushed adjustable timing competition motor. Silent Speed brushed motors are the perfect complement to scale | trail drivers looking for drive-able and rebuild-able power. One of the best aspects of brushed power is the ability to perform on a budget while performing at a high-level. The 35-turn Silent Speed motor, with dual ball-bearings, adjustable timing can be torn-down, cleaned and re-brushed at any moment for consistent performance. The Silent Speed motor works well in single motor applications and in crawlers such as Axial and Element. A great option as a replacement motor, Silent Speed has a lot of built-in advantages for scale RC monster truck events and promoters looking to level the playing field.

Source: JConcepts [jconcepts.net]

July 9, 2024

VP-Pro TLR offset 1:10 Offroad Wheels

VP-Pro has announced that its range of 1:10 Offroad wheels are now available in a TLR offset. Offering a 4WD Front and 2WD/4WD rear, all the rims will come in standard 3.5mm offset. Made of high-quality plastic, the lightweight wheels provide high rigidity which adds to better stability during cornering and conforms to IFMAR standards. Available in Yellow/White and come as a pack of four rims.

Source: VP Pro [vp-racing.com]