Red RC

October 30, 2020

Marka Racing Mini-Z aluminium car stand

Having only just released a new stand for 1/10th and 1/12th scale cars, Marka Racing have now introduced a version for 1/28th scale Mini-Z cars. Similar in features and function as the previously mentioned stand, this new smaller version is also made from black anodised aluminium with machined chamfering on the edges. It too features a number of holes that lighten the stand as well as act as holders for certain parts, such as shocks.

Source: Marka Racing [minizracing.it]

October 30, 2020

Factory Team B74.1 carbon fibre options

Four new Factory Team option parts are now available for the RC10B74.1 and RC10B74.1D buggy. First up is this 31mm V2 tower which is made to adapt the larger volume 31mm rear shock bodies to your B74.1 for conditions where you need improved jump ‘flat landing’. The V2 tower is designed to work with the same setup / stroke and 27.5mm shock shaft as the kit, with no up-travel limiters required. Next up is the FT carbon fibre ESC tray, shedding 2 grams of weight (6g vs. 8g) compared with the moulded plastic version and lowering the ESC at only 1.5mm thick. Finally there is two new chassis brace support sets, both made from 2mm thick carbon fibre. The ‘Flex’ chassis brace design is narrowed along the centre line to 5mm for additional torsional flex which is an advantage on bumpy dirt tracks or uneven, multi-surface outdoor turf tracks. The other chassis brace supports are a more rigid option than the kit G10 chassis brace support, used for high traction or when racers want to tune out traction.

View the other new parts here

October 29, 2020

AKA Products Scribble truggy tire

AKA Products have announced the 1:8 truggy version of their bestselling Scribble tire. Based on the tread design of the 1:10 Scribble, the weave pattern lends support to the tread and allows for even tire wear across the surface of the tire. The voids in the Scribble pattern allow it to grip through light dust that accumulates during a race. This weave pattern also features enough rubber in the design to make sure the tire will have the wear resistance to hold up run after run. The tread and carcass has been optimised for truggy racing with a slightly taller and thinner tread to meet the desired grip and drivability needed to compete at the highest level.

Source: AKA [raceaka.com]

October 29, 2020

Donuts Racing 7-in-1 multi tool

French company Donuts Racing have created this 7-in-1 multi functional tool for 1/8th offroad. First off it acts as shock length gauge, measuring distances from the top nut to a length of 50mm to 135mm. The other 6 functions are tie rod wrenches from 3.5mm to 8mm in half mm increments. The tool is made from 7075 aluminium and has been anodised in both black and orange.

View more images of the tool here

October 29, 2020

Axial Racing SCX24 B-17 Betty 1/24 RTR

New in the lineup of 1/24 scale SCX24 vehicles from Axial, the B-17 Betty 4WD is a micro scale model that celebrates Axial Racing’s 15th year of RC adventuring by bringing back the legacy body, Rock Lizard tires and Rockster wheels of the original AX10 Scorpion. Fully ready-to-run, it will please new RC drivers and long-time Axial enthusiasts alike with classic crawling performance plus Limited Edition collectability. It arrives in a specially designed collector’s box with scale garage artwork. You’ll find a commemorative coin inside that features the Axial 15-Year Anniversary logo, in an attractive case and available only with this model. Each RTR’s finished body includes a 15-year anniversary decal and its chassis side rail is laser-etched with the anniversary logo and your model’s unique production number.

View more details & images here

October 29, 2020

Marka Racing onroad aluminium car stand

New from Marka Racing, their new aluminium car stand is designed for 1/10th and 1/12th scale onroad. Produced in aluminium it has been black anodised with machined chamfered edging, the top surface sports multiple holes for holding shocks, diffs etc. For the top surface foam strips are included to prevent the car from sliding off while the underside has small plastic dots for more stability on your bench.

Source: Marka Racing [minizracing.it]

October 29, 2020

Losi Mini-B 1/16th brushed RTR 2wd buggy

The Losi Mini’s are back featuring TLR 2wd buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy is terrain-tearing and track-ready. The larger 1/16th scale is stable on the track generating quicker speeds and improved handling. With suspension geometry updated and taken from the TLR 22 platform and the inclusion of waterproof electronics with a 2.4Ghz radio system, you get more from a Mini than ever before. It features a mid-motor configuration for better balance, oil filled shocks and a full range of option parts all in a total ready-to-run package.

View more details & images here

October 29, 2020

Rusti Design XX rear shock tower

Available from French brand Rusti Design is this rear shock tower for vintage Team Losi XX buggies. The shock tower is made from 6mm carbon fibre and it features the same anchor points as the stock part for all XX generations, from the original XX to the XX-CR KE and allows the use of modern wing mounts. The benefit is you get a stiffer wing mount as well as a stronger shock tower plus you can fit the motor wires under the tower for the cleanest look.

Source: Rusti Design [rustidesign.fr]